Knitted mittens with a folding top. Transformable gloves with knitting needles How to knit mittens with a folding top with knitting needles

Residents of central Russia, where in winter they simply cannot do without additional hand insulation, but they no longer need to choose between the functionality of gloves and the warmth of mittens. As a result of the fact that someone very creative combined these two products into one, the result was mittens with a convenient folding top for walking, which are mittens with open fingers and a kind of “hood”. Thanks to the wide variety of patterns, as well as types and colors of yarn, such mittens can be knitted to suit any style of clothing, and this season it is fashionable not to match the color of the mittens outerwear, but use them as a self-sufficient model.

Traditionally, such transforming mittens, as they are also called, were used by hunters-fishermen or people working outdoors, since working in mittens is quite difficult, and it is cold in gloves. But due to the widespread use of phones, tablets and other gadgets, such mittens have become popular among all segments of the population.

You need to knit such mittens with knitting needles in the round, as usual, that is, you will need five of them; the yarn can be used of any composition, depending on how warm the product you want to get in the end. The main thing when choosing yarn is that it should be the same thickness.

So, let's start knitting our mittens with a folding top convenient for walking, especially since winter is just around the corner and it's time to warm up.

Master class on making transformable mittens with a folding top

These mittens will be an excellent New Year gift for your beloved man or girlfriend. It is better to take woolen yarn of medium thickness for making them; about 200 grams will be enough to make one pair.

We cast on the required number of loops on the knitting needles and knit the glove in the usual way, leaving about one centimeter short of the beginning of the little finger. After this, we knit one row of purl stitches on the back side of the mitten, and we tie the glove itself in any way convenient for you, while the fingers can either be closed completely or left partially open.

If you knit with threads of a different color, then throw the tail of the main thread to the front side, and tie the glove with other threads.

Now, from the remaining main thread, we cast on the number of loops that were on two knitting needles and knit with an elastic band about one centimeter, but do not make the elastic band too close to the mitten and the last row must be knitted so that if you put the elastic band on your palm, the thread will be on the left.

After we have knitted an elastic band of the required width, we cast on loops from the purl row on the back side of the mitten. In this case, the knitting needle must be inserted under the lower transverse broach of the purl loop, which is closer to the elastic band.

In this way, we cast on as many loops as were originally on two knitting needles.

Now we connect the elastic loops with the cast-on loops on the back side into a ring and continue knitting like a regular mitten.

The mitten is almost ready, all that remains is to tie the thumb, hide all the tails and sew the ends of the elastic.

Mittens, like any other, can be knitted or crocheted. One of the methods of crocheting is that first all the parts of the mitten are knitted separately, namely: the back side, the upper part of the palm, the lower part of the palm and two parts with halves of the thumb, then all these parts are combined into one product, and the top The mittens are tied with single crochets.

Most often, it is not transformable mittens that are crocheted, but openwork mittens, which serve more of an aesthetic function than protection from the cold.

With these simple methods, you can knit a very stylish and functional piece of clothing for yourself or your loved ones in a fairly short period of time, which will be very relevant on the eve of winter. On the Internet you can also find descriptions of other methods of knitting such mittens and choose the one that will be the simplest and most understandable.

Sets of a hat, mittens or transformable mittens and a scarf look very stylish, so if your knitting experience allows you to create such a set, then go ahead and get to work with this set of accessories self made you definitely won't get lost in the crowd.

Video on the topic of the article

In conclusion, we invite you to watch several videos on how to knit mittens with a very comfortable knitted folding top, so that you can start preparing gifts for Christmas now. New Year for your friends and relatives.

Fashionable and very beautiful transforming gloves. Such models are loved not only by teenagers. There are a lot of adult models that are very comfortable. You don't need to take off your gloves to answer a phone call (the sensor doesn't pick up any fabric well), you just need to fold the top down. Or open something (wallet, lock). But we should not forget that the model actually turns out to be very attractive. We present a master class for a women's (children's) transformable glove (with a finger cap), knitted with knitting needles.

Yarn for a mitten glove can be used of medium thickness, since the cap is often made in two threads, and therefore the product is very warm. This product will keep you warm in winter.

In progress stocking needles are more often used, they should only match the thickness of the thread. Additionally, such a model may require buttons and various decorative details.

When knitting with braids, use special knitting needles for making braids or simply additional knitting needles for transferring stitches.

Product dimensions

Women's sizes for the product will practically not differ in any way from the regular glove model. These are typical three measurements:

• palm circle;
• length from the level of the wrist to the typical line of the tubercle of the thumb;
• length from the level of the wrist to the typical line of the beginning of the index finger.

An additional measure in such a model will be the length of the convertible top.

How to knit transformable gloves with knitting needles?

Knitting flip-top gloves is not that difficult. In fact, this is half of ordinary gloves and half of mittens. A master and even a beginner can easily handle such products. A small master class on charming knitted items will help them with this. Such models are always suitable for both children and adults.

Pink transformable gloves “cute animals” knitted

Very delicate patterns can be made with knitting needles. The animal's face adorns the convertible top of the transformer. In this model you will learn how to get a beautiful base and applique with openwork motifs without extra threads inside (on the wrong side).

For work use:

• yarn of a suitable color for the model plus threads for applique;
• knitting needles according to the thickness of the selected yarn;
• a button to secure the flap.

Main part

We start knitting the pattern with an elastic band, moving towards the fingers. First you need to make a small sample and calculate the knitting density for it. This is the content of loops and rows of 10 cm. This measure is necessary to determine the required size of the product.

Make the elastic from the elastic pattern 1*1. To do this, make an appropriate set of loops. Continue knitting in the round without changing the pattern. Knit to the wrist line and knit another similar part for a small bend.

Important! Do not knit the thumb yet, but insert a contrasting thread along its length.

Continue knitting in the round until the beginning of your index finger. Now divide the knitting into 4 parts. Start knitting each finger and add a few stitches between sets so as not to leave holes between the stitches of the sets. Don’t knit the fingers all the way through, just bind off the stitches..

It is better to use a special elastic technique for closing loops in a row.

Folding part

Make a set of hinges for the folding part. The length will be equal to a set of loops around the circumference of the palm. No additions or subtractions. It is better to knit the folding part with a double thread. The part starts with a 1*1 elastic band. Some craftsmen may not knit this element separately, but make half a set of loops from an already knitted product.

But if you are a beginner, you can do it separately, and then in the assembly simply sew on one edge with plain threads. Knit the required length and start decreasing stitches 2 cm before the end. Decrease 5 stitches in each row. It is better to decrease in a chaotic order so as not to form lines with decreases. In the last row, simply collect all the loops and pull them tighter. Then tie a knot and immediately hide the excess threads.

The convertible top will also require lugs. Knit them from a smaller set of stitches. Use as many loops as there are on one finger of the model. Knit 4 rows and start cutting stitches. Next, after 3 rows, close all the loops, pulling them into one. Sew the ears directly to the base of the convertible top.

Thumb

Pull the contrasting thread out of the thumb loops to create a hole. Pick up loops along the edge so that the fabric does not unravel and create holes. Knit a finger to the required length using circular rows and stockinette stitch. Closing the loops is similar to the other fingers of the hand.

Features of knitting mittens with knitting needles with patterns, jacquard, embroidery. Schemes and descriptions.

Winter frosts and snow delight adults and children. There are so many fun things you can do - sledding, skiing, snowballs, and just walking.

It’s even better to choose an interesting model of mittens and knit them with your own hands for yourself and your whole family/friends.

Handicraft is not only about creating things with your own hands, but also about transferring your mood, energy and thoughts to them. And for the craftswoman it’s time to slow down, meditate, and open up storehouses of love, which she then so joyfully gives to her family.

Before you start knitting mittens, remove them correctly on your hands.

How to knit simple mittens for men and women with knitting needles without a seam?

Knit mittens for an adult without a pattern on 5 knitting needles, or in the so-called grandma’s way.

For them choose:

• front or back stitch
• shawl pattern

Make the cuffs using 1x1, 2x2 rib or alternating knit and purl rows.

Before starting work, take measurements of your hands. Read in detail.

Knit a sample on 10 loops and 10 rows with an elastic band and the main pattern and convert the centimeters into loops. Be sure to take into account the multiple of 4 of the original number of loops. Then you will have the same number of needles on all needles.

The pattern for working on the stealth is to knit a pipe for the palm and fingers and separately for the thumb.

The toe of the mittens is:

• house
• semicircular

The difference lies in the method of decreasing the loops. In the first case - on the sides of the outer and inner parts of the mitten, in the second - through 1 loop throughout the entire row.

Knitted jacquard women's mittens: pattern diagrams with descriptions

Jacquard motifs in knitted items have rightfully won the love of needlewomen. And mittens with them can be created by a novice and experienced craftswoman.

Jacquard is divided into:

• lazy - ordered and chaotic drawings
• Norwegian - stars, deer, snowflakes

The figure itself shows:

• elements of flowers, plants, trees
• birds, animals

Just as the imagination of needlewomen is inexhaustible, so are the quantities interesting models There are many women's mittens with jacquard motifs. Below are some diagrams and job descriptions for inspiration.

Openwork mittens for women with knitting needles: pattern diagrams with descriptions

Women's mittens with openwork patterns, knitted, can also warm your hands from the cold. The secret lies in the naturalness of the thread. Choose 100% wool or mohair for these models.

Features of openwork mittens:

• knitting a pattern with yarn overs is carried out only on their back side. The inner one is done using stockinette stitch,
• the need for a stage of work on a control sample for the correct calculation of the loops of the product in its different parts,
• the presence of wide cuffs so that the mittens do not slide down on your hands

Get inspired to create openwork mittens with knitting needles for yourself or as a gift by viewing ready-made job descriptions and patterns below.

Women's mittens knitted with pearl pattern: diagram with description

The pearl pattern is simple to perform, but provides products with:

• volume
• warm
• beauty
• practicality
• light combination with decorative elements, such as buttons, crocheted flowers

Are you just planning to pick up knitting needles and knit mittens for yourself? Feel free to choose a pearl pattern as the basis for them.

Make the cuffs with an elastic band, for example, 2x2 to a height of 8-10 cm. Then your mittens will fit tightly on your wrists.

The pearl pattern, or “rice”, or “corn” consists of alternating knit and purl stitches, over which a purl and knit stitch are made.

As an example, let’s add one of the descriptions of knitting women’s mittens with a pearl pattern.

How to knit warm double mittens with knitting needles for men and women?

This model of mittens is many times warmer than single-layer ones.

To knit it, follow the steps:

• select yarn for the outer and inner layers. It will be convenient if it is of different colors.
  Thin mohair is also suitable for the outer mitten if you decide to decorate it with openwork motifs. And for the inner - wool or wool mixture, even from loose products,
• for contrast openwork pattern make the inner mitten from darker/lighter yarn than the outer one,
• if you love braids and decide to knit them on the outside of the mitten, then for the inside, only the front stitch is enough,
• take measurements and draw a diagram taking into account the difference in the parameters of the outer and inner mittens. The first is necessarily larger and wider than the second by 0.7-1 cm,
• convert the centimeters into loops and mark them on the diagram,
• pick up your knitting needles and start knitting,
• After completing the outer mitten, return to its first row on the cuff and pick up the loops with your hook. Continue working on the inside,
• Consider placing your thumb on one side for the outer and inner halves of the mitten.

If you are knitting a double pattern, consisting of 2 independent mittens, which are put on one another, any patterns and descriptions of work will suit you. Add your creativity and delight your hands with warmth.

Knitted mittens for lovers: photo, diagram with description

Interesting models of mittens for lovers attract needlewomen with their originality of execution and scope for creativity in decoration.

Since a man and woman in love walk hand in hand, they need 3 mittens:

• one per free hand
• one common large

Knit the first ones in different sizes if the hands of a man and a woman are very different in parameters. Otherwise, matching mittens will do. Products knitted with knitting needles stretch well, so young people with almost identical hands will feel comfortable wearing them.

Do the second one like this:

• tie the cuffs of 2 mittens either in series or in parallel with one thread,
• combine both fabrics on the same knitting needles and switch to general circular knitting. Break the thread on one mitten, leaving a tail of 5 cm. There are models where general knitting begins 3-5 cm after the cuff,
• cut the loops in the middle of the overall fabric and then for the toe.

Detailed description of the work in the figure.

And a photo series of finished models:

Mittens with deer knitting needles for men and women: pattern diagrams with descriptions

Norwegian jacquard motifs are associated with winter and warmth knitted products.

Both men and women like deer on mittens. It is convenient to make them with a thread of a contrasting color.

Some interesting deer patterns for mittens:

And a description of the work for men's and women's knitting mittens:

Transformable fingerless mittens for men and women with folding top knitting needles: description, diagram

Mittens with a convertible top match the modern pace of life. They are combined in themselves:

• practicality
• originality
• ease of use with fingers
• warmth for the entire hand

Both men and women like these types of mittens.

In addition to the usual mitts, above which there is a flap for the fingers, needlewomen came up with a model with a similar folding “house” for the thumb. She has loose fingers like gloves. Therefore, the reliability of fixing the mitten on your hands is ensured.

Knit such a transforming mitt for a dear man according to the description below.

The fair half of humanity loves models with patterns, for example, jacquard. Take a closer look at the following description before knitting transformable mittens for yourself.

How to knit warm mittens with knitting needles using an English elastic band for women?

English elastic gives the product warmth and volume. It is simple to perform, but requires carefulness and attentiveness of the needlewoman during work.

To ensure that your mittens keep their shape and remain beautiful, knit them on 2 knitting needles and then sew along the edge of the palm.

Main stages of work:

• take measurements, knit control samples of the fabric and draw a diagram of the mittens,
• when knitting loosely with English rib, take knitting needles thinner than yarn,
• To keep the mitten fabric soft, work without edge loops,
• knit the thumb using stockinette stitch. For harmony, use it to also use the toe of the mitten,
• Sew the mitten with a crochet hook without over-tightening the loops. This way the seam will remain soft and will not interfere with your wear.

Women's mittens with rhombuses and arans, long knitting needles: pattern diagrams with descriptions

Aranas, thanks to multiple weaves, look beautiful on a long fabric. Therefore, start knitting mittens with this pattern 15 cm below the wrist.

For example, insert rhombuses in the center of the canvas, and a “rice” pattern inside them. This way your mittens will gain beauty and originality, and your hands will be warm.

Be careful when preparing your yarn for these patterns. It is needed more due to the multiple weaves of loops.

Below are several patterns of aran patterns for women's mittens and descriptions of knitting the latter.

Women's mittens with snowflake knitting needles: pattern diagrams with descriptions

Winter means frost, trees without leaves, deer and elk in the forest, ornate patterns on glass and snowflakes. You will see all the images on mittens knitted with knitting needles.

Snowflakes are especially amazing. They are not alike. That’s why their patterns on mittens are varied. For example:

Knit mittens with snowflakes into your collection according to one of the descriptions added below:

Knitted braided mittens: diagram

If your task is to knit warm mittens in one layer that will fit tightly on your hands and provide warmth, then stop your collection with the “braided” pattern.

Its diagram is below:

Thanks to the crossing of loops in the front rows, the fabric comes out quite dense and keeps its shape.

Be sure to knit a control sample and correctly calculate the number of loops for the mittens. Otherwise, they risk becoming childish due to the narrowing of the fabric during knitting.

Women's mittens with plaited knitting needles: diagram

Mittens with cords will appeal to women who appreciate the beauty, originality and warmth of knitted products.

The procedure for creating them is similar to the classic one or another one convenient for you.

And the diagrams are presented below:

If necessary, adjust the width and height of the mittens. Try to preserve the drawing as much as possible.

Knitting mittens braid with shadow: pattern diagram with description

Another voluminous pattern for warm mittens is braids with shadow. There are fewer weaves in it than in wicker, and it also slightly compresses the fabric, but the beauty of the result will not leave the needlewoman indifferent.

Braids with shadow are performed in 2 ways:

• ordinary
• "grandmother's"

The difference is in the frequency of the rows with interlacing loops. In the first case - through the front row, in the second - in every 5th.

The pattern repeat is 12 loops, which is especially convenient for knitting mittens.

Below is a diagram and descriptions for both methods:

Lazy patterns for knitting mittens: photos, diagrams

We offer you a selection lazy patterns for knitting mittens and descriptions for them:

How to knit warm men's and women's mittens from thick yarn?

Choose thick wool yarn for knitting warm men's and female models mittens and knitting needles to match her. That is, No. 5-7 and no thinner.

Choose the main pattern from simple ones, for example, front or back stitch, figured front designs among the back ones.

Consider the knitting density of the control sample to calculate the loops for the mittens. The total number will be very different from the usual use of ordinary yarn.

Elastic for cuffs is also relevant for mittens made of thick thread.

Otherwise, the operating procedure is similar to any description that is understandable to you.

How to knit warm downy mohair mittens with knitting needles: pattern diagram

Goat wool in knitting threads is so soft and fluffy that you want to use it to create warm mittens for the winter.

The thread itself is thinner, for example, acrylic or wool. Therefore, carefully select the knitting needles for it.

To knit beautiful mohair mittens, pay attention to the following points:

• a large number of purl rows causes a pattern failure on such yarn,
• pattern. Openwork inserts are acceptable. Because of the fluff of the yarn, your hands will still be warm,
• knitting density. Keep it moderate without constriction.

Several patterns for knitting mohair mittens for inspiration:

How to knit warm mittens with knitting needles using an Indian wedge?

For this:

• use wool yarn
• choose a pattern without openwork,
• Extend the fabric under your thumb using broaches between the loops. Knit them crossed in the next row so that the fabric maintains its integrity without holes.

For more information about the method of knitting mittens with knitting needles with an Indian wedge, see the description in the figure below.

Mittens knitted Norwegian patterns: diagram with description

If you are afraid to knit patterns in a different color on mittens, then you are definitely looking at beautiful models in magazines or handicraft websites.

It's time to gather your courage, prepare yarn, knitting needles, a pattern and mittens, and please your hands with warm and beautiful new clothes.

Below is a diagram and description of knitting mittens for men and women at the same time.

As well as a number of Norwegian patterns for inspiration.

Princess mittens knitted: diagrams and description

Handicraftswomen liked the designer model of knitted mittens so much that they vying with each other to show off their finished new clothes on handicraft websites.

On the one hand, the pattern is simple, consisting of crossed facial loops. But in practice it raises a lot of questions and errors in work.

Therefore, carefully read the patterns and descriptions of knitting princess mittens.

Knitted mittens with embroidery: photos of embroidery

beautiful knitted mittens with voluminous embroidery

Knitted mitten models with embroidery are especially beautiful.

If you are a beginner craftswoman and have mastered the stockinette stitch on 5 needles, pay attention to the decor of the finished mittens using a needle with floss/fine yarn.

They embroider on finished mittens using several techniques:

• imitation of a connected loop
• smooth surface
• stitches

To add some zest to their mittens, needlewomen add the following to the embroidered elements:

• beads
• rhinestones
• pearl

Below, see a photo series of designs for embroidery on mittens.

How to knit New Year's mittens with knitting needles: photos of models

The New Year is approaching and the busy time with choosing and purchasing gifts for dear people is in full swing.

Invest in quality wool yarn in different colors and use it to knit mittens.

There are as many New Year’s motifs as there are techniques for creating warm things for your hands.

To associate mittens with New Year's motifs, you should:

• decide on the drawings,
• evaluate your skills and abilities to choose a drawing display technique. For example, embroidery or jacquard,
• decide on the knitting technique - on 2 or 5 knitting needles, with patterns or stockinette stitch,
• get ideas from experienced needlewomen, for example, on aspen,
• find a moment of inspiration and start knitting.

Let's add a number of interesting ready-made mittens with New Year's motifs:

So, we looked in detail at different techniques for knitting mittens, as well as a lot of patterns that are both knitted and embroidered on finished products.

Grab your knitting needles, yarn and yardage and create warm and beautiful mittens for your whole family.

Even loops!

Video: how to knit princess mittens with knitting needles?

Wrist circumference: 16 – 17.5 (18 – 20) cm

Materials

Yarn Berroco Ultra Alpaca (50% alpaca wool, 50% wool, 100 g/198 m) 1-2 skeins. Double or circular needles 3.25 mm, stitch holders, markers.

Knitting density

24 p. and 32 r. = 10 x 10 cm in stockinette stitch

Description

Left mitten glove

Cuff: cast on 38 (42) loops, join in a circle and place a start marker. Knit with 1x1 rib to a height of 9 cm. Next round: knit all stitches in stockinette stitch, adding 2 (4) stitches. Next, knit another 2 (3) rounds. Next, knit the gusset for the thumb:

1 circle: k1. p., put a marker, at the end of the circle – put a marker, k1. P.

Round 2 (increase circle): knit 1. p., 1 p. from the broach, move the marker, at the end of the circle - move the marker, 1 p. from the broach, k1. P.

Rounds 3 and 4: knit in stockinette stitch

5th circle: circle of increases.

Rounds 6 and 7: knit in stockinette stitch. Continue knitting the gusset until there are 16 (18) stitches between the markers. Next, knit 2 more circles in stockinette stitch on 54 (56) stitches. Knit the next round only up to the second marker, then remove the marker and transfer the next 16 (18) gusset loops to the holder. We will knit them later. Turn the work and cast on 2 sts, turn the work and join the loops in a circle (now there are 2 new loops on the needles above the thumb). The beginning of the circle is in the middle between these 2 stitches. Place a marker and continue knitting for 40 (46) stitches, knit 4 (5) circles.

**Next round: Work the first 21 (24) stitches in the round, before continuing to knit, pull a piece of yarn through these loops. Knit another 3 (4) rounds, in the last round knit all the loops, leaving the last 6 (7) stitches. Try on the glove to make sure that you can then start knitting the fingers.

1 finger: transfer all loops except the first and last 6 (7) stitches to an additional needle. The resulting 12 (14) stitches will be used to knit the finger. Knit 12 (14) sts, turn the work and cast on 3 sts, turn again and join the loops in a circle - 15 (17) sts on the knitting needles. Knit 4 (6) rows.

Note: in order to get rid of possible holes in the base of the fingers in the work, it is recommended to cast on 1-2 extra loops and make decreases in the next round, thus removing them from the work.

2nd finger: take 5 sts of the front part of the glove from an additional knitting needle, cast on 3 sts, take another 5 sts of the back of the glove from an additional knitting needle, cast on 3 sts at the base of the 1st finger. Total 16 stitches on knitting needles. Knit 5 (6) rows in stockinette stitch and then 4 more rows in rib stitch. In the next row, bind off all stitches according to the pattern.

3rd finger: knit as for the 2nd finger.

4th finger (little finger): transfer the remaining 8 (12) sts to the working needles and pick up 4 (3) sts at the base of the 3rd finger. Total 12 (15) stitches on knitting needles. Knit 1 circle. p. In the next circle, decrease 0 (1) p. and knit 2 more circles with stockinette stitch. Next, knit 4 circles with an elastic band and bind off all the loops according to the pattern.

Thumb: transfer 16 (18) stitches from the additional needle and then cast on 4 new stitches. The beginning of the circle is in the middle between the 4 new loops - place a marker.

1 circle: 2 persons. p., 2 p. together, at the end of the circle - 1 decrease (remove 1 p. without knitting, 1 knit p. and stretch it through the removed one), k2. P.

Round 2: knit. P.

3rd round: knit as 1st round.

4th round: knit as 2nd round. *Continue to work on all loops until the length is 2 cm. In the next round, start making decreases, knitting 1 knit. p. and then 2 p. together. Next, knit 1 circle of faces. p. and in the next round close all the loops.

Lapels: cast on 21 (25) sts and knit with 1x1 rib, then start casting on new stitches along the outer part of the glove along the line where the thread is pulled. As a result, you should get 42 (49) sts on the knitting needles. Join the knitting in a circle. In the next round, knit the first 21 (25) with an elastic band, and the cast-on loops in stockinette stitch. Knit 4 more rounds. In the next round, decrease 0 (1) stitches and then knit with stockinette stitch on all stitches to a height of 4 (5) cm from the first decrease circle. Then, in every 2nd round, decrease on both sides of the stitch until 18 (20) stitches remain on the needles. In the next round, bind off the remaining stitches in any way convenient for you. Using the same principle, knit a lapel for the thumb, casting on 9 stitches to start knitting.

The top of these mittens comes off to expose your fingers. Convenient and practical.

Size

Finished Product Measurements

Length 25.5 (26.5) cm

Width 9 (10) cm

Materials

Yarn Lion Brand Heartland, Isle Royale (100% acrylic) 235 m / 140 g - 1 (1) skein

Double-edged needles 4 mm and 4.5 mm

Loop holders

Tapestry needle

1 meter of fine yarn in a contrasting color

Knitting density

18 stitches = 10 cm in stockinette stitch in circular rows using large needles. Tie a test pattern

Patterns used

Elastic band 1 x 1 in circular rows (there should be an even number of loops)

Round 1: *k1, p1; repeat from * to the end of the round.

For the rib pattern, repeat Round 1.

Note:

The mittens are knitted in one piece in circular rows on double-pointed needles.

The cuff is knitted with an elastic band, the rest of the mitten is knitted in stockinette stitch in circular rows (knit stitches each circular row). A contrasting thread of yarn is needed to mark the position of the flap. The thumb and the folding part on the mitten are knitted after the main part is knitted.

Description

Right mitten

Cuff

Using smaller needles, cast on 32 (34) sts. Distribute the stitches on 4 knitting needles (for a smaller size of mittens - 8 loops on each knitting needle, for a larger size of mittens - 8 loops on two knitting needles and another 9 loops on two knitting needles). Place a marker at the beginning of the round and complete the round. Be careful not to twist the loops.

Knit with an elastic band 1 x 1 7.5 cm or the required length of the cuff.

Change to a larger needle size and continue knitting in 1cm stockinette stitch.

Round 1: K15 (16), knit across front and back from next stitch, knit to end.

Round 2: K15 (16), place marker, k3, place marker, knit to end.

Round 3: knit to the first marker, re-slip the marker, knit the next two stitches behind the front and behind the back wall, k1, re-slip the marker, knit to the end – 5 stitches between the markers.

Round 4: Knit all stitches.

Round 5: knit to the first marker, slip the marker, knit the front and back wall of the next stitch, knit up to two stitches before the next marker, knit the front and back wall of the next stitch, k1, slip the marker, knit to end.

Round 6: Knit all stitches.

Repeat rounds 5 and 6 until there are 13 stitches between markers.

Next round: knit to first marker, slip marker, k1, slip next 11 stitches onto stitch holder, k1, slip marker, knit to end.

Work 32 (34) stitches evenly, without adding in stockinette stitch, in circular rows until you reach 16.5 (17.5) cm from the beginning or the required length for your arm.

Next Round (flap marker): Place the working thread and the contrasting thread together and knit 16 (17) stitches together with two threads, cut the contrasting thread, leaving the end of the yarn, then knit the working thread to the end of the round.

Continue knitting in stockinette stitch 2.5cm, then ribbing 1 x 1 2.5cm.

Close the loops according to the elastic pattern.

Folding part

Using large needles, cast on 16 (17) stitches, then cast on 16 (17) stitches and knit them along the mitten - 32 (34) stitches.

Distribute the stitches on 4 needles, place a marker and close the circular row.

Repeat the last circular row until you have knitted 2.5 cm from the cast-on row.

Top shaping (both sizes)

Round 1: K2tog, k14, k2tog, k14 – 30 (32) stitches.

Rounds 2, 4, 6, 8: Knit all stitches.

Round 3: *k3, k2tog; repeat from * to the end of the round.

Round 5: *k2, k2tog; repeat from * to the end of the round.

Round 7: *k1, k2tog; repeat from * to the end of the round.

Round 9: K2tog to end of round – 6 (8) stitches remaining.

Cut the yarn, leaving a long end. Pull the end of the yarn through the remaining loops and pull them together, tying a knot. Fasten off the free end of the yarn.

Thumb

Return the stitches from the stitch holder to work, distributing them on three double-pointed knitting needles as follows: 6 x 5 loops on two knitting needles and 1 loop on the third knitting needle.

With the third knitting needle, evenly pick up and knit 4 loops along the edge, place a marker and close the circular row - 15 loops.

Work these 5 (6.5) cm thumb stitches evenly in stockinette stitch in circular rows.

Next Round: knit 2 together until the last stitch, knit the last stitch – 8 stitches remain.

Cut the yarn, leaving a long end. Pull this end through the remaining loops and pull them off, tie a knot and secure the loose end of the yarn.

Left mitten

Knit in the same way as the right mitten up to the folding marker

Next Round: Using working yarn, knit 16 (17) stitches, then fold the working yarn and the contrasting yarn together and knit together with two threads in knit stitches until the end of the round. Cut the contrasting strand of yarn, leaving a free end.

Assembly

Carefully remove the contrasting strand of yarn. Fasten off the loose ends of the yarn.

print