Warm and fashionable mittens: knitting materials, work process. Knitting mittens with knitting needles - a guide for beginners How many threads are needed for mittens

What can you give to your dear man: father, spouse, son, friend? The most valuable gifts are considered to be those made with care and love with your own hands. They are the ones who reflect a real attitude towards a person, warmth and sincerity, which one would like to present only to the most dear people.

Knitting men's mittens is no more difficult than women's - you just need to cast on a little more loops. To find out how many loops you need to cast on for knitting, you can crochet a chain of chain stitches, trying them on your wrist, then connect them into a ring and continue knitting. If you want to calculate accurately, knit a small square sample and make calculations using it. It is better to take the dimensions directly from the hand of the person for whom the mittens are intended, because if you buy ready-made ones on the Internet, you can get a product of a larger or smaller size. You will need the circumference of your wrist, the height from the beginning of knitting to the thumb, to the tip of the little finger - the decrease will begin here, and to the tip of the middle finger - this is the final length of the mittens. Yarn consumption depends on the pattern and density of knitting. The pattern itself, like MK for beginners, can be chosen on the Internet, for example, in our article. The instructional video at the end will also be helpful.

During winter, a suitable gift for the mighty half of humanity will be warm and beautiful men's mittens, which are knitted using knitting needles. Let's analyze the features of knitting men's mittens– selection of yarn, calculation, and determination with a suitable pattern.

Mittens - This is a very useful and comfortable winter accessory that will help you escape the cold.. Nowadays, you can buy mittens of various models at the bazaar, however, it is much more pleasant to wear mittens that are knitted with your own hands or the hands of a loved one.

A few more advantages to learning to knit on your own:

• If you have the skill of knitting clothes, then you will be able to make entire winter sets - a scarf, hat, mittens or snood. This set fits perfectly together if you use the same style and the same pattern when creating.
• In order to learn how to knit elegant mittens, you first need to create a simple form of mittens - without a seam or a complex pattern.
• By understanding the basics of knitting such accessories, you will have the opportunity to knit any warm clothes for your family.

How to choose knitting needles and yarn?

Wool yarn is ideal for knitting warm clothes. It's quite warm and durable. However, one must take into account the fact that it can have an unpleasant effect on the skin, for example, pricking and causing irritation. As for natural wool, it does not tend to cause irritation, is of excellent quality, but is also expensive. Natural wool includes:

It is also possible to knit men's mittens using a mixture of the following types of yarn: acrylic + wool or mohair. These thread options are warm due to the fact that that contain natural wool, but at the same time do not prick the skin thanks to acrylic.

The required color must be selected taking into account the taste of the man to whom you want to give a gift. Typically, men choose strict, soft colors:

• Black;
• Grey;
• Brown;
• Khaki;
• Dark blue.

How to knit men's mittens?

After the calculation has been made, you need to cast on the required number of loops and divide them among four knitting needles. Men's mittens should be knitted starting from the cuff. It is made using an elastic band: 1 by 1, 2 by 2, or some other option - everything is at your discretion. As for the length of the cuff, everything is arbitrary, the most important thing is that it does not turn out to be excessively short.

Having dealt with the cuff, you need to start knitting the base of the mitten up to the thumb. You can make this place either using stockinette stitch or using any relief or jacquard pattern on the visible side of the mitten.

Having tied to the beginning of the thumb, need to leave room which will be intended for him. To do this, you need to remove the loops, from which the finger will then “appear,” onto some additional knitting needle or pin. If there are 10 loops on the pin, you should cast on the same number of loops on the working knitting needle. Then continue knitting in the round.

We continue the process of knitting men's mittens using knitting needles until the mitten covers the little finger. At this stage it is possible to begin decreasing.

The shape of the mitten can be pointed or semicircular. For the last option, the decrease is done evenly: for example, every 8 loops you should knit two loops together.

In order for the edge to be pointed, the decrease occurs at the end of the second knitting needle and at the beginning of the third, in the same way at the end of the fourth and at the beginning of the first.

Regarding the thumb, you need to knit in the round with three knitting needles. You should start closing it if there is only one and a half centimeters left to the tip of your finger..

Detailed step-by-step description of men's mittens knitted

Mittens, like woolen socks, are something every woman needs to learn how to knit. Below we will provide a detailed description of knitting simple men's mittens using knitting needles without a seam.

Detailed description and diagram

This product can be either plain or with the addition of thread of any color to the front stitch or elastic. The knitting plan for such mittens is very simple: 2 x 2 elastic for the wrist, and everything else is a knit stitch.

Continuation of knitting:

• Knitting the thumb of the right product should be done on the first knitting needle, and the left one on the second knitting needle. Therefore, knit the first loop that belongs to the first knitting needle using a regular outer stitch, and remove the remaining 8 stitches and secure.
• Then cast on 8 yarn over stitches on the same knitting needle and knit the remaining ninth loop with the outer stitch. Now there is room in the mitten for your thumb.
• Now you need to knit 8 cm to the nail of the little finger.
• It is customary to knit the toe of the mitten with decreasing stitches. On the first and third knitting needles, knit the first two loops behind the back wall. Turn the first stitch over in advance. On the remaining knitting needles, knit two soma loops together at the end behind the back wall.
• It is necessary to knit in this way until there are 2 loops on all knitting needles. Tighten the loops and secure on the wrong side.
• Knitting the thumb - you need to remove the pin and insert a knitting needle in its place, and thread the other on the opposite side. The result will be 6 loops on the top needle and 7 on the bottom.
• Divide the loops into 4 knitting needles: three knitting needles with 4 loops, and she with three, and in addition one loop must be removed from the side edge.
• The finger must be knitted in a circle and up to the beginning of the finger. Then you need to make a decrease.
• Decreases for the toe are done in exactly the same way as for the toe. If there are loops left on each knitting needle, they should be pulled together and secured on the wrong side.
• The second knitted mitten should be made similarly to the first, however, in a mirror image.

Patterns for knitted men's mittens

What patterns should you use when making men's mittens with knitting needles? There are many different schemes, but which ones are suitable for men? One of the simplest and most appropriate mitten knitting options is pearl (also called “rice”). This is a sequential alternation of purl and knit stitches, which are placed one above the other. The pattern takes on a rather large and obvious appearance..

Jacquard pattern

Is it possible to combine jacquard and men's mittens? Jacquard patterns do not only consist of flowers, there are many options for Norwegian patterns, which are great for men. Mittens knitted with jacquard will be more durable and warm because they are knitted using two threads. By the way, you can come up with a pattern for the product yourself, and then the mittens will take on a unique and inimitable look.

Knitted men's mittens with jacquard knitting needles need careful handling; you don't need to tighten the threads too much so that the item doesn't turn out to be too tight, however, you shouldn't leave the weaves too loose. After all, then it may be that while putting on mittens, fingers will feel broaches.

Rules for knitting mitten patterns

In the pattern of patterns where paired rows are knitted in the direction of the loop, you need to use only odd-numbered circles, recreating all odd rows twice.

Rate this article

Mittens are part of the image, so they should fit perfectly on the handle. This will ensure accurate and cold calculation when knitting mittens.

Knitting mittens can be done in two ways: in the round (tubular knitting) and in two parts (front and inner).

Wool required per pair (in grams):
for women - 100-120 grams;
for men's - 100-130 grams;
for children - 50-80 grams.
Our website describes several types of knitting mittens. In each case, it is required to calculate the loops using the control sample and take measurements.

Knitting a control sample and calculating knitting loops

The number of loops in 1 cm is counted. The resulting number of loops is multiplied by the length of the hand to the wrist. For example, there are 3 loops in 1 cm, multiply by 19 cm: 3 x 19 = 57 loops. We round the resulting number of loops to a multiple of 4, downwards (in this example we get 56 loops), and then divide the resulting number by 4.

Taking measurements
To create a pattern, you need to take the following measurements.
1. Hand girth (measure the widest part of the palm along the bones) - 19 cm.
2. The length of the hand from the wrist to the end of the middle finger is 18.5 cm.
3. The length of the hand from the wrist to the end of the little finger is 15 cm.
4. The length of the hand from the wrist to the base of the thumb is 6 cm.
5. The length of the thumb from the base to the middle of the nail is 5 cm.

Construction of the outer part of the mitten pattern, construction of the inner part

Construction of a mitten pattern. Knitting mittens in the round on double-sided knitting needles includes:
1) knitting a cuff (elastic band);
2) knitting brushes;
3) determining the place for the thumb;
4) palm knitting;
5) decreasing loops to form the end of the mitten;
6) thumb knitting.

Knitting cuffs or elastic bands

Patterns called ribbing are used to finish the bottom of the product. They are elastic, stretch well and keep their shape. All elastic bands are based on alternating knit and purl stitches.
It is recommended to knit the mitten cuff with elastic knitting. It should fit snugly to your hand. For sports mittens, the cuff with the edge can be knitted with a length of 1/3 of the length of the mitten

The cuff can be knitted separately, and only then sewn to knitted mitten. The cuff connected to the gaiter is not so elastic, so it is recommended to insert a lace into the gap between the cuff and the wrist or hem it from the wrong side

Knitting mittens up to the thumb
This part of the mitten, as a rule, is knitted with facial loops to the height calculated according to the measurement (the length of the hand from the wrist to the base of the thumb).

Determining where to place your thumb
Mittens can be knitted the same way, it doesn’t matter whether they are left or right (Fig.). When knitting the thumb in the round, the decrease in stitches also occurs in the round.

Determining the location for the thumb of the mitten
When knitting mittens, the thumb of the left mitten is made on the 4th knitting needle; for the right mitten, the thumb is made on the 3rd knitting needle (Fig. b), in the figure the places of the thumbs are marked with a dotted line.

Knitting Thumb Mittens
The width of the finger is equal to the number of loops on one knitting needle minus 1-4 loops, depending on the size of the finger (14 sts - 4 sts = 10 sts). For

To determine the position of the thumb, the mitten must be placed palm up, determine the position of the end of the thread: on the mitten for the left hand it should be on the right side of the knitting, on the mitten of the right hand - on the left side.

The loops intended for knitting the thumb are transferred to a pin. Loops for knitting the thumb of the mitten, and on the knitting needle in the same row the same number of loops is cast as the number of loops transferred to the pin (in our version 10). Then the knitting of the main part of the mitten begins.

Knitting the main part of the mitten (palm)
The palm of the mitten is the largest part of it, so it is knitted so that it extends slightly beyond the base of the little finger. The part of the mitten covering the hand is knitted with facial loops. Then they begin to decrease the loops to form the end of the mitten.

Decreasing mitten loops

The shape of the mitten can be rounded or pointed. The rounded end of the mitten is obtained when we knit 2 stitches together.

Thus, the loops are decreased in the middle and at the end of the loops on each knitting needle. However, it is necessary to ensure that the decreasing loops are located one above the other in strict order. When there are 4-8 loops left on all knitting needles, the thread is cut and pulled through the remaining loops, pulled to the wrong side of the mitten and secured there.

The pointed end of the mitten is obtained by decreasing the loops as follows: the 1st loop is removed from the knitting needle without knitting as a purl, the 2nd loop is knitted and pulled through the 1st.

At the end of the loops on the 2nd knitting needle, knit 2 together. At the beginning of the loops on the 3rd knitting needle, the loops are reduced by pulling the 2nd through the 1st loop, at the end of the 4th - 2 knit stitches together.

The loops are decreased in each row until there are 2 loops left on the knitting needles. Then the 1st loop is knitted, the 2nd is pulled through the 1st. The end of the thread is secured in the same way as in the first case.

Knitting and decreasing thumb stitches

The upper and lower loops are carefully cast on 3 knitting needles. To avoid “holes”, add 1 loop on each side of the thumb at the top

To prevent the “hole” from being too big, when knitting the 1st row, these loops are knitted with the front one crossed. To prevent the number of loops from increasing, decrease 1 loop on each side of the thumb in the next row. All cast-on loops are distributed onto 3 knitting needles and a finger of the required length is knitted - to the middle of the nail.

At the end of the thumb, the loops are reduced in the same way as at the end of the mitten. Knitting the thumb of the second mitten is done in the same way. The finished mittens are steamed. It is not recommended to steam cuffs.

Knitting mittens from two halves on 2 knitting needles
Making a mitten on 2 knitting needles includes:
1) knitting a cuff;
2) knitting the top and bottom parts according to patterns (the top part should be 1 cm wider than the bottom);
3) thumb execution;
4) sewing two parts together.

Before starting work, you should take measurements.
1 Hand girth (measure the widest part of the hand at the bones).
2 Length of the hand from the wrist to the end of the middle finger.
3 Length of the hand from the wrist to the end of the little finger.
4. Length of the hand from the wrist to the base of the thumb.
5 The length of the thumb from the base to the middle of the nail.
6. Wrist circumference.

Knitting the top of a mitten with an ornament or colored stripes

The width of the mitten should be greater than the width of the palm.
Knitting the upper part of a mitten with an ornament or colored stripes

Therefore, you should add 1-2 loops along the edges of the product and knit the fabric until the loops begin to decrease. You can decorate the canvas with colored patterns or multi-colored stripes. Then, at the beginning and at the end, decrease 2 loops (2 loops together with the front one) in the front rows. When there are 2 loops left on the needles, cut the thread, pull through these loops and tighten.

The lower part of the mitten is made according to the pattern 1 cm narrower than the upper part, then the seam moves towards the palm. The thumb is worked on 3 knitting needles in the same way as on mittens knitted in the round.

The mitten halves are placed on the pattern, steamed, sewn or crocheted with single crochets.

Knitting the upper part of the mitten with a relief pattern

In the center of the upper part of the mitten, knit 3 stitches together. In the same row, along the edges of the knitting, add loops using yarn overs or by knitting a loop from the gap of the underlying row in order to restore the original number of loops. Purl rows you need to knit without changes, removing the unknitted loop in the center. Having reached the end of the little finger, decrease 1 loop at the beginning and end of the row until 2 loops remain on the knitting needle. After this, cut the thread and tighten.

See also, which can be used for jacquard knitting

Learning how to knit mittens with knitting needles for beginners is not at all difficult, especially if you use tutorials in which the oral history is accompanied by video materials showing all the details of this process.

Mittens are an indispensable part of winter clothing, reliable protection of hands from frost, comfortable for children and adults, neat and beautiful. For beginners, the easiest way to master knitting is to start by creating mittens - you will learn it yourself and prepare your household for winter.

p.s In the last article we looked at how to crochet mittens

You are invited step-by-step instruction creating several types of mittens:

The yarn used is Caucasian troika, there are 180 meters of thread per 100 grams. We knit mittens using knitting needles No. 2, thin knitting needles were used to make the mittens more dense. The width of the mitten in the girth of the hand is 7 cm, the height of the elastic is 4 cm, the total length of the mitten is 14 cm. We cast on 15 loops on the knitting needles, then knit a voluminous 1x1 elastic band.

In the first row, knit and purl loops are knitted alternately, then purl loops are knitted until the end of the next row. The next row is alternating knit and purl stitches. The height of the elastic is at your request. Next, the pattern is distributed.

Video lesson:

They can be worn on any hand, the finger is located along the edge of the mitten. The elastic band on the wrists is knitted with a zigzag, the main pattern is pearl knitting. The yarn used was “Pekhorsky Textiles”, wool blend, consisting of 50% merino wool and 50% acrylic. A 100-gram skein contains 270 meters of thread. We used needles No. 3. We cast on 48 loops of 12 on each of the four knitting needles and close them in a circle.

In the initial row, two knit stitches and one purl stitch alternate, the sequence is maintained until the end of the row. In the next row, the second loop is knitted, then the first loop is knitted. This is how the entire second row is knitted. The next rows are knitted in the same way until the width is 7 cm.

Video lesson:

There are no patterns on it, since this model is for beginners. To take measurements, you will need to trace your hand on a piece of paper and determine the dimensions by which the loops will be calculated. Having knitted the sample, we see that there are 9 loops for the width of the mitten plus one for fullness, and the same on the back, so a total of 20 loops are needed.

Used 5 double needles. We cast on 20 loops on two knitting needles, one of them is taken out, and the knitting needles are distributed on four knitting needles, the fifth will be the working one. Next, knitting is done in a circle. The elastic is knitted 1x1, knit and purl stitches alternate.

Video lesson:

36 loops are cast on the knitting needles and distributed evenly across three knitting needles. Knit a 1x1 elastic band, the first loop is knit, the second is purl, and so on in a circle. The number of rows in the elastic band is optional, 10 rows are accepted. Next we continue to knit in stockinette stitch. All stitches are knitted and knitting continues to the beginning of the thumb.

Next, let's look at how to knit a finger on a mitten: remove seven loops on a safety pin and make up for them by throwing 7 loops on the right knitting needle. We continue to knit in the circle with facial loops. There remains a hole in which the finger will subsequently be tied.

Video lesson:

Two small skeins of clean wool were used for two mittens. The mittens are made of yarn of two colors. Double needles were used. To begin with, we cast on 44 loops, they are distributed over 4 knitting needles. Let's start knitting a simple elastic band 1x1, that is, alternate knit and purl loops. There are a total of 12 rows in the elastic band. To make the mitten the same width as the elastic, you need to decrease 4 loops: instead of 44, 40 loops will remain.

Next, all rows are knitted in stockinette stitch, so that all stitches are knitted. This is how the section from the elastic to the finger is knitted. Next, 7 loops are removed onto the loop holder to obtain a hole for the finger.

Video lesson:

A detailed description of all stages of work, including preparatory ones, is offered. Alize Lanagold wool blend yarn was used; 100 grams equals 240 meters of thread. For knitting the elastic, knitting needles No. 2.5 were used, and for the main part - No. 3. To begin with, a sample is knitted, hand measurements are taken, and loop calculations are performed.

First, an elastic band is knitted; it is better to make it longer so that you can bend it and get a cuff. Next, the mitten is knitted with the main pattern to the location of the thumb, then the main pattern continues to the end of the little finger. Then the loops are closed and the thumb is knitted.

Video lesson:

Yarn used was ALIZE, Real 40 (480 meters in 100 grams), half a skein was used. Yarn composition: 40% wool, 60% acrylic. We knit in two threads. The knitting needles are stocking needles No. 3. Cast on 8 loops per knitting needle. Next, a 1x1 elastic band is knitted, in which knit and purl stitches alternate.

The elastic band is knitted to a width of 7 centimeters; you can start on the outer side of the mitten, decorated with a braid. The loops are cast on in strict order on two knitting needles; on the remaining ones, all loops are knitted. Five rows are knitted this way, then we proceed to cross the braid. It is important not to confuse the order of knitting the loops.

Video lesson:

Let's look at the procedure step by step. The yarn used was 100% alpaca, which required two skeins, knitting was done in two threads. Knitting needles for knitting elastic were used No. 2.5, and the mitten itself was knitted with knitting needles No. 3.5. There are 32 stitches cast on the knitting needles, eight on each.

Next, knit a 1x1 elastic band with alternating knit and purl stitches. Knit stitches are knitted on the front wall of the loop, purl stitches on the back wall. All rows of elastic are knitted in this way. The main pattern is knitted with needles of increased thickness, the first row is knitted with knit stitches, the second with purl stitches, and this alternation of rows is maintained.

Video lesson:

Everything is shown in detail in the video, from calculating loops to making patterns. The yarn used is Drops Baby Merino, 50 scales contain 175 meters of thread, the material is pure wool. Double needles No. 3 and circular needles of the same number. First, the loops are calculated, then we proceed to knitting a 2x2 elastic band, that is, two front loops alternate with two purl ones.

We knit two rows of this elastic band. In the third row, six loops are removed onto an additional knitting needle and wrapped with thread. We knit two front loops and two purl loops, again remove 6 loops and wrap them with thread.

Video lesson:

Knitted from Australian Merino yarn, folded in three. The yarn contains 5% acrylic added to 95 percent merino wool. There are 400 meters of thread per 100 grams of yarn. Stocking needles No. 3. Instead of the usual elastic band, it alternates purl and front rows. 32 loops are cast on, 8 per needle.

Three rows are knitted with purl stitches, two with knit stitches, and these five rows are repeated on the cuff 6 times. Holes are formed behind the elastic band into which the lace will be threaded. Then twenty rows are knitted up to the thumb and 30 rows after this finger, then the loops are closed, one on each side.

Video lesson:

With the onset of cold weather, knitters begin to think about warming their families; they knit hats, scarves, and socks. And it’s very difficult to do without warm and cozy mittens in winter. To make knitting mittens as easy as possible, we have prepared this article-lesson for you.

This lesson provides introductory information in tabular form on calculating and knitting mittens in the classic way, that is, in the circle, using stocking needles or circular ones for knitting using the magic loop technique. To knit mittens, it is advisable to choose wool thread when selecting yarn; it retains heat better than all other materials and at the same time allows the skin of your hands to breathe.

The first table shows data for fine yarn, which is usually knitted on 2.5 mm knitting needles - 200 meters per 50 grams.

The second table shows data for knitting mittens from thicker yarn on 3 mm or 3.5 mm knitting needles - 125 meters per 50 grams.

To knit mittens you need significantly less yarn than to knit socks. For example, to knit any of the children's sizes it will take no more than 60 grams of yarn, for women's and men's sizes You will need about 100 grams of yarn. At the same time, it is also worth taking into account the chosen knitting pattern; if it is strands or braids, then the consumption may increase by 20-30%. In any case, when purchasing yarn, after rough calculations, it is recommended to buy 10% more yarn.

How to knit mittens using different techniques and with different patterns to suit every taste and color.

Almost everyone had knitted mittens from their mother or grandmother in childhood. Many people, mostly women, over the years learn to knit warm mittens for their children, loved ones, or themselves. It is much more pleasant to have in your wardrobe something made with your own hands or the caring hands of your loved ones.

Mittens are a symbol of warmth and comfort

How to learn to knit mittens with knitting needles?

Knowing how to knit something yourself is a very good and useful skill. You never know when you'll want a new scarf, gloves, socks or mittens. There are always people who love to create something with their own hands; buying ready-made products in stores is not interesting for them. It is these people who create masterpieces that are stunning in their beauty.

Mittens can also be beautiful and stylish. If you knit yourself, then you have the right to decide absolutely everything regarding the model yourself. And we will write about where to start and how to learn to knit in this article.

Step 1. You need to learn from quality materials, so choose the most comfortable knitting needles for yourself. They can be made of metal, bamboo, bone, plastic. As a rule, metal knitting needles are chosen because they provide the necessary thread glide. And metal knitting needles do not catch the yarn, which is very convenient.

Step 2. Choose good yarn. It all depends on what exactly you want to knit and on your initial skill. If you are holding knitting needles for the first time in your life, then keep in mind that it will be difficult for you to work with threads that stretch a lot or do not stretch at all. Usually in such cases, half-woolen threads are recommended; they are quite elastic, and finished products made from them hold their shape well. Beginners are also not recommended to work with threads that come in three or more folds - you are guaranteed a large number of puffs.

Step 3. Decide on your knitting technique and pattern. It's best to start with the very basics: cast on stitches, knit stitches, purl stitches. Further more. Learn to knit using different techniques. Learn the rules of knitting braids, patterns, elastic bands and other elements.

Step 4. Casting on stitches is the very beginning of knitting. If you make a mistake at this stage, then most likely your knitting idea will not be realized. To correctly cast on the first row of stitches, use the diagram below.

Step 5. Now you need to master the technique of stockinette stitching. This is the basis of knitting.

Step 6. Once you understand the technique of knitting stitches, start learning the purl technique. They are not very different from each other, but they both need to be masterfully mastered.

This was the most basic knowledge that a person who wants to knit beautiful things in the future should have. Master them, and only after that start making a full-fledged product.

Calculation of loops for knitting mittens

First of all, you need to determine the size of your hand - calculate the length of the wrist, hand, and fingers. If you incorrectly calculate all the dimensions, then your product will turn out unsightly and crooked, so pay special attention to this step.

For the back side:

1. Cast on the number of stitches required for the mitten on two knitting needles (half as many). How to find out the exact amount that will be used is described earlier in the article.
2. Be sure to cast on one additional loop on each side. These will come in handy for stitching at the very end.
3. Tie an elastic band, 7-8 cm long.
4. Using the technique (pattern) chosen in advance, continue knitting to the tip of the little finger.
5. After this, begin to reduce the number of loops as shown earlier in the article (knit two loops into one).

For the inside:

1. Do all the same work that you did with the first half, but only to the end of the elastic band. The scheme will change further.
2. Now cast on 3 quarters of all stitches onto a pin.
3. On the remaining loops on the knitting needles, pick up the same number of loops that were removed. A rectangular element is knitted from them - the future thumb.
4. Knit those loops that remain on the pin with an even fabric up to the little finger.
5. Next comes the decrease according to the standard scheme.
6. Both sides are ready. Now you need to sew them from the inside out using a regular needle and thread.
7. The mittens are ready.

How to tie an elastic band onto mittens

Elastic band, or cuff (cuff) - this is the name of that part of the mitten that fits tightly to the wrist and reaches the hand. An elastic band is needed, first of all, for better fixation of the mitten on the hand. It is thanks to the cuff that the mittens do not fall off at the first wave of the hand.

It is not necessary to make mittens with an elastic band. But otherwise, be prepared for the product to quickly stretch and lose its “marketable” appearance.

We have already presented several options for knitting elastic for mittens in this article, but we will nevertheless present more.

In the case when you want to make a beautiful elastic band, but you don’t have the time or skills to weave patterns, you can use a tricky trick - you can sew fur onto the elastic band. Then the mittens will look completely different.

How to knit a mitten finger with knitting needles for beginners?

The finger on the mitten is always knitted separately from the main product, or returned to it when all the main work has already been completed.

In this part of the mitten, be especially careful; if you knit the wrist perfectly, but make mistakes in knitting the finger, the product will have to be re-tied.

The thumb can be knitted with or without a wedge. Mittens in which the thumb is made with a wedge look neater than those mittens in which the thumb is made without a wedge.

Thumb knitting pattern for wedge mittens.

Thumb knitting pattern without wedge.

This is what mittens look like, in which the thumbs are made with wedges.

How to decrease and finish a mitten with knitting needles?

There are several ways to finish knitting a mitten. In this article we have revealed just one. Therefore, below we will tell you about some more methods that you may like more.

Method number 1. To make the toe of the mitten rounded, decreases are made only at the end and in the middle of each of the knitting needles. The last loops are collected into a ring and tightened from the inside out.

Method number 2. On the first and third knitting needles, knit every 2 first loops using a slip, pulling one loop through the second. And on even (2, 4) knitting needles, knit only the last 2 stitches together in the usual way.

How to close the loops on mittens with knitting needles?

Close the knitting of the mittens at the top where the so-called “toe” is. This is done by pulling the thread in a ring through the remaining loops. Then the thread is tied on the reverse side and cut.

If you tie the thread from the front side, you can get an unsightly seam, from under which the cut thread will stick out. Therefore, do not forget to tighten the mittens from the inside out.

Garter knit mittens for beginners

A mitten made using the garter stitch technique always consists of two halves - an outer and an inner side. Therefore, any mittens on two knitting needles can be made using this technique.

Now we will tell you how to knit these mittens.

Knitted fingerless mittens for babies: diagram and description

To keep your baby warm, knit mittens for him with your own hands. For very young children, fingerless mittens are knitted so that children's hands do not freeze. In another way, such mittens are called scratch mittens.

Fingerless mittens are very easy to knit. Even a beginner can knit such a product without problems in just a few hours.

Mittens without fingers are knitted on 5 knitting needles in a way already familiar to you.

How to knit fingerless mittens for babies without fingers:

1. Cast on 32 stitches on 2 needles and distribute them across 4 needles.
2. Knit a small elastic band about 4-5 cm long. Knit, alternating one front and one purl loop.
3. Now only knit about 6-8 cm with facial loops; there is no need to make a hole for the finger.
4. When the main part is finished, start decreasing 1 stitch on each side of the knitting needle. Knit 6 rows like this.
Scratchies for kids in a marine theme Part 2


A simple pattern for knitting mittens for beginners: diagram and description

TO simple patterns usually include braids, plaits and all kinds of lines. To knit such patterns for a beginner, just follow any of the patterns below.



And here is a detailed description of knitting braids for mittens using knitting needles.





Video: How to knit mittens with knitting needles? | How to knit mittens.