How to make a Christmas tree from paper and beads. Christmas tree made of beads. Step-by-step master class. Earrings in the shape of a herringbone made of beads

Hi all!

We continue the theme of the new year, if in the last article we already talked to you about. And they made it from all available materials, then at this stage I want to focus on beads. We will make a Christmas tree from these small beads. By the way, they are divided into several more types, for example, bugles and cutting. I promise we won’t ignore this view either.

Let's figure out what beads are? First of all, of course decorative decoration. In the center of which there is a small hole. Ideal size for stringing on fishing line and wire. It is these two materials that are the binder. That is, it is simply impossible to make any product without using wire and fishing line. Therefore, before starting work, be sure to check all the material for availability.

By the way, thanks to these decorative beads you can make not only a Christmas tree, but also Santa Claus and many other toys. And some needlewomen even make jewelry in the form of necklaces, bracelets and even earrings. In a word, beads are very popular among different generations of people. Some make toys, and some decorate their walls with them by embroidering pictures.

An equally important point is the quality and manufacturer of such beads. I know of two of them: China and the Czech Republic. The second option is very popular among experienced needlewomen and its price is several times higher. If you are just a beginning master, then I suggest sticking with the Chinese version. Although it is of lower quality, it is practically not noticeable in finished crafts.

I think we have discussed the main aspects. Now is the time to get down to business. We go down below and select the appropriate one from the presented options.

Christmas tree made of beads - master class for beginners

Let's start our master class with the very simple option. We will make a Christmas tree from glass beads. By the way, you can replace it with a regular type of bead. And decide the color yourself. Our forest beauty will be a beautiful white shade. As if under a snow coat.

For the lesson you will need a minimum of material. And maximum effort, if everything is already prepared, you can get down to business. Sit down in a comfortable position, this activity takes a lot of time. But this work suitable for any beginner.

We will need:

• White bugles
• Silver wire with a diameter of 0.4 mm.
• Floral ribbon
• Red beads
• Alabaster + water
• Shallow bowl
• Scissors
• Red wire

Manufacturing technique:

1. Cut the wire 40-50 cm. We collect 4 glass beads and twist them into a loop. Then we step back 1 cm to the side and again collect 4 bugles, repeating a similar process.

For this branch we need to make 9 loops. Now that everything is done, divide the wire exactly in the middle so that one of the leaves is in the very center. Carefully bend and twist the wires parallel to each other. One branch is ready.

2. We need to make the remaining branches in a similar way. The only difference between them will be the number of loops. The technology itself will not be any different.

1 type - 5 loops (number of finished 4 branches)

Type 2 - 7 loops (number of finished branches: 6)

Type 3 - 9 loops (number of finished branches: 11)

4 type - 11 loops (number of finished branches 8)

5 type - 13 loops (number of finished branches 6)

3. Now you can start assembling. We take a wire 20 cm long, the thickness of which is 2 mm. It will serve as a trunk for us, or even some kind of support.

We take a branch of type 1, which has 5 loops, place it at the very top and secure it with heat tape (floristic). It should be wrapped well so that no gaps are visible. Just below we fix 3 more branches of the first type. We also go through the tape.

We do the same with the remaining branches, observing the order by type.

Please note if the number of branches is 6-12 pcs. and more, you don't need to place them all in one line. Divide them into equal quantities, for example 1 layer 3 branches, then repeat the second.

I think at this stage there should be no questions. But if anything is not clear, write in the comments below, I will be glad to help you with an answer.

4. Now that our New Year's beauty is completely assembled, you can straighten its branches. Give it a more attractive look. Next we start making the stand. For this we need a shallow bowl. It can be made of any material. We put a plastic bag inside it and pour the diluted alabaster mixture on top. Don't make the mixture too thin. The consistency should be like porridge.

Fill the bowl with the prepared solution. And carefully insert our beauty, the barrel should touch the bottom of the dish. Hold it for a while until the solution sets. Then you can release it and let it dry completely.

Congratulations, half the job is done. When the mixture is completely dry, carefully remove our work. You should not pull it sharply by the top. Please note that the product is quite delicate and one awkward movement can ruin it.

Look at the barrel, do you agree that it is not quite finished yet? I think it needs to be slightly expanded towards the bottom. To do this, take a piece of gauze and dip it in the remainder of the alabaster mixture. We take it out from there and wrap it around the bottom of the trunk. Giving it some form of wood.

While the solution on the trunk has not dried, you can create grooves. To do this, take a small sharp skewer and walk along the trunk, drawing regular, uneven lines. Now let the work dry. Then you can start painting. We will paint with acrylic paint. You can use watercolor, but unfortunately it is not so rich and will have to be applied in several layers.

Let the paint dry, then you can varnish the barrel again. To make the tree look more realistic.

Well, all the main stages of manufacturing the work are completed. It's time to start decorating. We will start from the lawn of our Christmas tree. Apply colorless glue to a flat surface (for example, for ceiling tiles). Then carefully sprinkle with white glass beads. Creating some kind of snow.

Our beauty is almost ready, give it a little time to dry. For now, you can start making toys for decoration.

To create toys we will use bright red color and a similar color of wire. We string 6 beads and twist them into a loop. Then we collect two more beads on one of the ends. And we pass them through one located in the very middle. This way they will be in the center.

We put a small piece of wire on the finished ball, which will serve as a pendant. Then we attach them to the branches of the Christmas tree and cut off the excess ends.

Our product is ready, you can give it to someone close to you. Or leave it at home and decorate your apartment with it.

Christmas tree weaving patterns

You can weave such a beauty in absolutely different ways. Everyone will have their own manufacturing technique. I wandered around the Internet a little and put together a small but very interesting selection for you. Thanks to which you will certainly make a choice and get to work. But first, of course, you need a little perseverance. Are you ready to listen? Then let's go and get down to business quickly.

And here is one of the first and probably easiest schemes. Which will be the first work if someone hears about beads for the first time.

By the way, such a Christmas tree can become an ideal pendant or brooch. And some needlewomen use this pattern to make earrings.

Here is another work, similar to the previous one. True, they played a little with color here, which makes it several times brighter and more interesting. No less original idea Christmas trees can be seen nearby. It turns out to be quite miniature. But despite this, it is very durable and can last for many years in the house as a souvenir.

You need to start weaving such a Christmas tree from the top of the head. First of all, we weave a star, then one by one we go lower. Follow the color scheme shown in the picture. By the way, wire is used to weave such work. You can glue a magnet to the finished product and voila, an excellent decoration for your refrigerator is ready.

I couldn’t leave this Christmas tree unattended, it’s so delicate. This technique is accessible to any beginner. But you still have to try.

I would like to talk about needle weaving. I think probably each of you has already imagined what this Christmas tree will look like in reality. I promise it will be very beautiful. Thanks to this execution technique, we seem to revive a living version of the tree. And on our finished work you will be able to see identical needles.

By the way, today we will talk about detailed weaving in more detail. Because this technique is very popular.

I think at this stage it's time to end. It's time to move on to the next scheme, which we have already become a little familiar with. Let's get ready, it will be very interesting.

Needle weaving of a three-dimensional Christmas tree - step-by-step video

What could be better than a step-by-step process? It’s great when everything is explained very step by step and even told. I decided to dedicate the video to this title, because this work is not so simple. Perhaps at first glance you will say that everything is easy, but you will have to work hard.

The result was unreal beauty. Be sure to use this technique for making a New Year's symbol. Let your family enjoy the awesome decor for your apartment.

Original tree from the cabin with toys

An incomparable version of a New Year tree with toys. This work looks absolutely beautiful. And the manufacturing scheme is accessible to every beginner. What is required of you, of course, is desire, perseverance and maximum effort. I promise if you have all these qualities, everything will work out.

This craft will become an original decoration for your home. By the way, you can use the finished product as a gift and present it to your to a loved one. Because you wouldn’t want to give such a toy to an ordinary friend. After all, so much work will be invested.

Cutting is one of the forms of beads. Which is made in the form of small tubes, cut off on both sides.

To make this forest beauty we will need:

• Green beads (cut) and a little brown
• Wire
• Beads of different colors
• Decorative stones
• Pot (small)
• Alabaster
• Scissors

Manufacturing technique:

1. Let's start making our Christmas tree. We will start weaving it from the very top according to the pattern. We cut the wire 50 cm long. We string the following combination of beads onto it: golden beads, glass beads, a bead of gold and silver shades, green beads.

Now that the entire combination has been assembled, we proceed to the next manipulation. We pass the thread through the glass beads and the remaining beads located below. Please note right away that our entire structure must run in the center.

If you did everything correctly, then the result should be two straight ends of the wire. Now we put 4 green beads on each side and twist the ends together (in two or three turns).

Now on each side we again put beads of the corresponding color (as in the photo) in the amount of 10 pieces. And twist it again in two turns. This way we will get two loops.

2. Repeat this manipulation again to get 4 loops. And we gradually begin to manufacture the second tier. We will prepare it separately and then attach it to the base.

We assemble a combination of beads as shown in the second part of the picture. We secure the loop again by twisting the wire 2-3 times. Then we repeat a similar process only on both sides.

As a result, we should get four branches like this. By the way, to make them you need to take a wire 25 cm long.

Please note that each of the loops is made at a different level. To make it happen for you, increase the number of revolutions in the right places.

3. Third tier: cut the wire 30 cm long. In this case, the whole process is similar to the previous one. The only thing is that the number of loops will increase by 2 pieces. We need 4 units of such branches.

4. Let's start making the fourth tier. We cut a wire 30 cm long in the amount of 8 pieces. We repeat the entire process similar to the third point. But since the number of ready-made branches has increased, now our task is to fasten them two at a time. This way we get 4 ready-made branches for the fourth tier.

5. The fifth tier is similar to the previous one. We cut the wire 35 cm long. We make 4 branches of 7 loops from it. We are preparing to make the sixth tier. We cut the wire into 8 pieces of 35 cm each. We braid 5 loops on each. Then we connect two at a time, i.e. took one ready-made branch and connected it to the second. And only then we wrap them with a common metal thread.

7th tier (shown in the second part of the picture) we make a loop in the very center of the wire. Then from it there are 3 more loops on each side. We repeat similar actions at the second end. It's okay if the metal thread becomes a little shorter. To make this tier, we will need 4 pieces of wire 60 cm each. On the last loop, twist the two ends of the thread two turns together. This way we get one whole.

6. Let's look at the last layer and then start assembling our beauty. We stock up on patience; here it will come in handy a little more.

8th, cut the wire in the amount of 4 pieces of 60 cm and 8 pieces. 30 cm each. From the length of the thread we make a branch similar to the 7th tier. From the shorter one we make five loops. Now we connect all the resulting branches, as shown in the figure above.

Congratulations on one task, you have completed it, it’s time to start assembling the finished product. Nothing complicated here. We just start connecting all the tiers together, starting with the smaller one.

To make the finished work look more beautiful, at the end additionally wrap all the joints with wire. Well, our beauty is ready. Let's put it in a beautiful pot. To do this, dilute a small amount of alabaster, fill the prepared pot with it and place the trunk evenly. Let the mixture dry completely, only then can you begin decorating the bottom.

If you are using a clay container. Before filling it with the prepared solution, fill it with unnecessary material (sponge, cloth or paper). This is necessary so that the pot does not burst during the drying process.

I remember that at the beginning of the article I promised you a Christmas tree with toys. Let's do them together, nothing complicated here. We take multi-colored beads and wrap a small amount of wire around them. We fix it on one side. The toy on the pendant is ready, you can hang it on the Christmas tree.

By the way, if you want the trunk of the finished tree to be green, you can use floral tape. It can be purchased at any craft store. Yes, and you can choose colors there to suit your taste.

These are the wonderful ideas for making forest beauties that we looked at today. Don’t delay, decide on an option and get down to business. There is very little time left. If you start now, you can get a lot done.

See you again friends!!!

Christmas tree with golden nuts.

Materials:

Beads green and brown,
wire 0.4, threads,
floss, for wrapping branches and trunk.
stiffer wire for the frame.
gypsum
PVA glue,
decor,
acrylic varnish.

Several tiers of branches can be repeated, but increase downward. to create the correct shape. I wrapped thread around the trunk, but not all of it. when I planted it in a plaster stand (a stand made of plaster combined with water), the lower part was coated with a mixture of gypsum and PVA glue (one to one, the mixture is thick, but not very thick, applied with a brush or a not very thin stick, creating the image of bark). I let it dry overnight, and in the morning I covered the barrel and stand with acrylic paints. After which, she decorated it with moss, stones, and beads.

Author: lunnaya

Beaded Christmas tree using needle technique.

For work we will need:

Cut beads of 2-3 colors, I took 2 colors, it took me about 80 grams;
0.3 mm wire - 3 coils, it is advisable to have pliers on hand, as it will be easier to pull out the wire.

Our branch will be made according to the following scheme:

a “needle” of 7 beads in the center, around it there are 4 needles of 5 beads (the alternation of colors is arbitrary).
Then we put 2 beads on both ends of the wire and make the next row of needles, 4 pieces of 5 beads each, then again 2 for the transition and another row.

To make a needle, we pass the free end of the wire in reverse through the 4 lower beads, pulling them tightly to the base.
The branch should not “fall apart”.

3-4 small branches can be twisted into one large one.
We leave one in the center, this will be the top of the head, we begin to form a circle around it, carefully braiding the trunk with wire. After all, there will be no trunk as such; the branches fit tightly to the wire in the center.

Make 5-6 rows in a circle for a small Christmas tree, or more if desired.

When the Christmas tree is ready, we will make the base. Don’t rush to straighten all the needles, you’ll do that later.
I need a fairly large base, because the tree will go as a gift and I will need to put an inscription on it, but it can be made smaller.
A baby juice box came up for me, into which I poured a plaster solution and inserted a Christmas tree. When the plaster hardened, I cut the box and took out the Christmas tree.

The decor of the base is according to your wishes, you can make grass, you can make snow - whatever you want!
After painting, you can straighten the branches and give the work its final look.

The cabin sparkles amazingly!

And if you drop a few drops of spruce essential oil on the base, it will turn into a healing forest guest!

Author Inna Vuimina

Christmas tree from cutting.

To make one beaded Christmas tree with your own hands you will need:

Green chop – 50 gr.
brown chop – about 5g.
brown wire (or copper) about 50m
alabaster
colored pebbles (or other decor)
two pearl beads
bugles
stand

The Christmas tree consists of 10 tiers. Each tier has four branches.

We begin to weave the Christmas tree from the top of the head. We cut the wire 45 cm long. In the middle of the wire you need to string a gold bead and a group of white bugles, gold and silver beads, 1 green bead. Pass the second end of the wire through the entire group. Place 4 green beads on each end of the wire:

After this, you need to twist both ends of the wire together 3-4 turns. At each end of the wire, collect 4 green beads, 2 brown beads, 4 green beads, and twist them into loops.

Twist the ends of the wire 2 turns and make two more of the same loops, as shown in the following photo:

Let's move on to making the second tier of the Christmas tree from beads with our own hands. We cut 4 pieces of wire 25 cm long. We make 4 branches of three loops from them with a set of: 3 green beads, 2 brown, 3 green.

Twist the wire 4-5 turns from loop to loop, 3 turns from the last loop.

Let's start making branches for the third tier of our hand-woven Christmas tree. To do this, from 4 pieces of wire 30 cm long we make 4 branches of 5 loops each. The first three loops, as on the branch from the second tier, in the next two loops, instead of three green ones, cast on 4:

As you understand, you need to weave 4 such branches as in the photo above. After this, we prepare branches for the fourth tier of the beaded Christmas tree. To do this you will need 8 pieces of wire 30cm long. You need to make 8 branches with five loops in each:

The first three loops, as can be clearly seen in the photo, are the same as on the branch from the second tier; in the next two loops, cast on 6 green beads. After the last loop, twist the wire down 4-5 turns. From two such branches, collect one, screwing them with a spiral 3-4 turns:

5th tier: from 4 pieces of wire 35 cm long, make 4 branches of 7 loops each. The first three loops, as on the branch from the second tier, in the next four loops, cast on only 6 green beads.

6th tier of the Christmas tree: we start it in the same way as the 4th tier (8 pieces of wire, 8 branches of five loops each) But we collect the branches in pairs a little differently. You need to cut an additional piece of wire 20 cm long. From the last loop, wind 12 turns in a spiral with additional wire. Then screw the second branch 15 turns using a spiral:

Branches for the 7th tier of a beaded Christmas tree: cut 4 pieces of wire 60 cm long. Make the first loop in the middle of the wire. Next, cast on 6 more loops, as on the 6th tier, on the same end of the wire so that the other end remains long.

After the last loop, twist it by 6-7 turns. Also make 7 loops on the other (long) end of the wire:

Using additional wire, twist the branch into a spiral downward 8 turns.

Tier 8: cut 4 pieces of wire 60 cm long and 4 pieces 30 cm long. Twist branches from 60 cm wire, as for tier 7, from 30 cm wire - branches with five loops:

From these two branches, collect one, screwing them into a spiral. First, put a spiral on a branch with two ends - 15 turns, then screw a small branch with 15 turns:

Tier 9: the same as for tier 8, only increase the number of turns of wire from 15 to 18.
10th tier: cut 4 pieces of wire 70 cm each, 4 pieces 35 cm each. Make branches according to the same pattern as for tiers 8 and 9. Only in a large branch, cast on 8 and 9 loops, in a small one - 7. Number of turns spirals increases to 22.

Now the branches for all tiers of our beaded tree are ready, we can begin assembling the tree.
Take additional wire (do not cut it from the spool!) and, starting from the top, wrap the ends of the wire down.

An additional rod is not required, because due to the number of tiers (and branches in each of them), the trunk thickens and does not bend.

The distance between tiers is from 0.8 cm (from the top) to 1.2 cm (to the bottom).

After assembly, all that remains is to plant the Christmas tree in the stand. To do this, you need to dilute the alabaster and stick a Christmas tree into it, wait until the alabaster dries. Then, using transparent glue, decorate the frozen alabaster soil with colored pebbles, moss, cotton wool with glitter, and beads.

Here is our resulting green beauty, it even seems that the festive aroma of pine needles is in the air:

A Christmas tree can be made not only from beads or cutting, but also from bugles. In addition, you can decorate the Christmas tree:

Author Elena Bashkatova

Small green Christmas tree.

To make a small green Christmas tree from bugles you should prepare for work:

Copper wire 0.3mm (for branches);
- 0.5 mm copper wire (to give rigidity to the branches);
- 3mm aluminum wire (for the trunk of the Christmas tree);
- green bugles (for a fifteen-centimeter tree you will need 300 grams);
- floral tape (green or brown);
- PVA glue, alabaster, wood stand.

The Christmas tree shown in the photo can be made in a week, with a load of 3-4 working hours a day. To set glass beads onto wire, it is convenient to use an automatic bead threader.

Initially, mix all the glass beads in a special container. We begin to collect bugles on the wire, we collect about 4 meters, without tearing the wire from the spool, we begin to make the first branch.

We put 2 pieces of glass beads, put on a wire, together. Fix it 1-2 turns. On the other side we do the same.

Thus, we should make strips:

4 strips for the branches of the first row and the crown, 5 cm each.
3 strips for branches of the second row, 6 cm each.
3 strips for the branches of the third row and the crown, 7 cm each.

We put 5 mm copper wire folded in half along the strip, tighten the strip a little (to about three centimeters - on the branches of the first row), twist everything - the branch is ready.

To make branches of the fourth and further rows, we proceed according to the following scheme: From approximately the fourth to the eighth row we make branches consisting of two small ones. Try to keep the branches of each new row longer than the previous ones, about 1 centimeter.
We make the branches of the remaining lower rows from three branches. In this case, the central branch will be twice as long as the side ones.

There is no need to make all the branches in advance. The Christmas tree is made differently from other beaded trees. It is more convenient to assemble it right away - this way you will see how many branches are required in each row, and how long they should be made.
We fix one branch on the wire - this is the trunk and the crown. We fix three small branches of the first order on the sides and wrap them with floral tape.

Below, stepping back a centimeter, we fix 3 branches of the second order.
Thus, we fix all the branches from top to bottom and wrap the trunk with floral tape. Since the trunk of the Christmas tree will not be visible, there is no need to paint it.

We fix our Christmas tree into a stand using children's plasticine (for stability). Apply a mixture to fix the tree in the stand (2 parts alabaster + 1 part PVA + water). After the mixture has not completely dried, decorate the pot with multi-colored stones; they will stick. The mixture will dry and our Christmas tree is ready!

Fluffy Christmas trees made of beads:

Different shades of green beads will be useful for this work.

You can mix different colors, so the Christmas trees will acquire a special, individual look. One tree requires at least 60 grams of Chinese large beads (number 8).
Be sure to use reinforced, thick wire so that it can barely get into the bead.
Thick copper wire is the key to the beautiful shape of our Christmas tree branches.

In addition, we will need floral tape, plaster, gouache, pliers, aluminum wire (for the trunk) and decorative elements for the final design of the New Year's craft.

How to make a Christmas tree from beads. To string beads onto a wire, we use a spinner. You need to put ALL the beads onto the wire at once.

Let's start weaving using the loop technique. The essence of weaving is simple - we need to make a large number of loops from all the beads, constantly increasing their size. We start with loops of 12 beads.

In the second loop we will make 13 beads, in the third – 14.

You can increase the number of beads in the loops without counting, “by eye”.

The result should be such a complex structure of parallel, constantly increasing loops.

For the top of the head we will make a small bud. We will weave an element of 5 loops, the legs of which are collected at a single point.

So that the wire does not attract attention, we will make it invisible. Paint the wire with green acrylic paint and wait until the paint dries.

Now you can begin to form the tree itself. To do this, take a piece of aluminum wire and bend a loop on one side. On the other side we will attach the top of the spruce.

It is necessary to securely fix the crown - we will wrap the entire trunk of the tree with floral tape.

Now we wind the wire with the loops cast on. Closer to the crown it is necessary to place the end of the element with small loops.

We fix the attachment point again with floral tape.

Finally, we can form our Christmas tree! Carefully wrap the wire-trunk with our branch loops.

Each loop will have to be gracefully bent, this will give the tree the necessary volume.

Mix gypsum or alabaster with water - from this mixture we will make the lower part of the tree. Let's select a round mold, line it with a bag, pour the mixture into it, and place a beaded spruce tree in the center.

When the plaster hardens, the tree can be taken out and freed from the cellophane.

Let's give the base a little rest. For now, let's start decorating the crown. Multi-colored rhinestones will come in handy for this.

We glue rhinestones onto beaded branches. We use simple PVA glue.

While the rhinestones are sticking, we will continue to work on the base of the Christmas tree. Let's apply some gypsum mixture and coat the lower part of the beaded Christmas tree trunk with it.

The barrel can be painted with green acrylic paint.

Don’t forget about the “bottom”; paint it white.

Apply white acrylic paint to the base of the tree.

When the paint is dry, let's use our imagination. The base can be varnished and decorative primer and decorations can be glued onto it.

Fairytale Christmas tree.

We need for 2 Christmas trees

Wire (thickness 0.4 mm, length 10 m),
beads (10 g),
sequins (pack of 20g),
scissors,
cork from plastic bottle,
gypsum,
fabric for decoration,
braid,
tapes

We string beads, sequins, beads onto a wire 16 cm long...... 3 branches of 10 sequins each (note that we start with beads and end with beads, and the sequins should be with the convex side in one direction) 5 branches of 15 sequins each, 5 branches of 20 sequins, and 5 branches of 25 sequins each (10g of beads and 20g of sequins are needed for 2 Christmas trees)

I string it in a row alternating beads and sequins, and when I twist the branches, I count the sequins, I move the bead, move it aside, cut off the required length (it should not be small, then it is convenient to twist) and twist the branch, I string the next bead, count the sequins, etc.

This is what should happen, we twist the Christmas tree 1st row - a branch of 15 sequins, the second row - 3 branches of 10 sequins, the third row - 4 branches of 15 sequins, the fourth row - 5 branches of 20 sequins, the fifth row - 5 branches of 25 sequins( if desired, you can continue 5 branches of 30 sequins each....) Take a cork from a plastic bottle, spread the plaster and fill our Christmas tree

Author Lyubov Zenkina

Christmas trees made of sequins and beads.

It was convenient for me to string beads with sequins this way: I poured some sequins into a bowl with beads, “poked” the wire into the sequin and immediately passed it among the beads (mostly some of them were strung)

This is how the Christmas tree is assembled in tiers.
Under each tier we twist all the wires a little

Here's how I made the stand:

When all the tiers are assembled, we twist all the wires together and string a bead with a huge hole (I had dark wooden ones);
- Carefully unwind the wire TO the bead and divide it into 3 bundles;
- We twist each bundle separately.

We combine the bunches, measure about 3 cm and cut off the excess;
- Bend the legs, bend the ends.

These are the cute guys we turned out to be.

And I decided to experiment - I made it from mother-of-pearl sequins - flowers. But because There weren’t many of them, so I reduced the number of sequins and increased the number of beads. It turned out well too :)

In this version: we string on a wire: beads (2 pcs), sequins, beads (2 pcs)... We start with beads and end with beads.
1st row - a branch of 7 sequins, 2nd row - 3 branches of 5 sequins, 3rd row - 4 branches of 7 sequins, 4th row - 5 branches of 9 sequins, fifth row - 5 branches of 11 sequins.

I offer my own packaging option.

So, from a plastic bottle with a narrow neck, we cut off the top part using the “cutting off the excess from the bottom” method. We cover the Christmas tree and make sure that it is not too crowded “under the dome” and that it does not “flop” too much.
According to the shape of the bottom of the finished “dome”, we cut out the bottom from plastic for our packaging (put the “dome” on the plastic, trace it, cut it out).

We attach the bottom to the “dome” with pieces of tape like this: in the place where the bottom will be fixed in the open state of the package (photo on the right) - just a piece of tape, and where we will open the bottom - we leave a “tongue” at the end of the tape on the side of the bottle ( just bend a piece of tape and glue it to itself
It is impossible to glue the bottom tightly, because... You can’t reach the tree through the neck of the bottle.

Author Yonya

Christmas trees made of sequins

We will need:

Beads (can be the same color as the sequins, or can be a different color)
sequins
weaving wire
hard wire for the barrel
thread for winding
container for planting a Christmas tree (I have an ordinary cream stopper, decorated with candy foil)

The Christmas tree consists of 17 branches + crown.

First, we string alternating beads and sequins onto the wire. Then we count out 17-20 sequins and twist the loop. This will be the top of the Christmas tree

The first row of branches consists of 4 loops of 10 sequins twisted close to each other

Second row: 4 branches of 3 loops. The loop consists of 15 sequins

Third row: 4 branches of 3 loops each. The loop consists of 20 sequins

Fourth row: 4 branches of 3 loops each. The loop consists of 25 sequins

Fifth row: 4 branches of 3 loops each. The loop consists of 30 sequins

When all the elements are woven, we assemble our Christmas tree. The distance between the branches during assembly is 0.8-1 cm. After assembly, we plant our Christmas tree in a suitable container, decorate it and admire our beauty

Author vfhecz32

Small Christmas tree.

For work we take green and white beads. We collect 11 beads in the middle of the wire in the following sequence: 4 green, 3 white and again 4 green.

Twist the loop.

In the same sequence we collect beads on one end of the wire

And we form a loop.
We form a loop at the other end of the wire in the same way.

This way we form branches for the top. The branch consists of seven loops. We will need 4 of them (don’t pay attention that there are more of them in the photo!) We twist all the branches together and form the top (sorry, there is no photo). We wrap the ends of the wire with floral tape.

And we twist them together.

We bend the loops to the edge.

We wrap the ends with floral tape. We will need 5 such blanks for one tier.

When all 5 blanks are ready, we screw them to our top using floral tape.

The top and first tier are ready!

For the 2nd, 3rd and 4th tiers we weave branches as for the top - from seven loops. For one tier - 10 branches.

We twist the branches in pairs - we get 5 blanks for one tier. Wrap it with floral tape.

We screw the branches to the Christmas tree. The second tier is ready! We do the 3rd and 4th tier in the same way. But for the 5th, we increase the number of white beads in the loop to 5. Those. our loop consists of 13 beads: 4 green, 5 white and 4 green. The number of loops on the branch is 7. For the 6th row, we form a loop from 15 beads: 4 green, 7 white and 4 green.

In principle, your Christmas tree may have more tiers, but it seemed to me that 6 was quite enough. After we have finished the last tier, we select a suitable “vessel” - in my case it is a candlestick. Next, we dilute plaster with water 1:1 and “plant” our Christmas tree. When the plaster dries, you can cover it with shiny varnish and sprinkle it with white beads - it will be beautiful. Or you can come up with more interesting decor. Create! New Year not far away! Please your loved ones with this New Year's surprise of your own making!

Author mari-m26

New Years is soon.

For this we need beads, wire cutters, wire and always a good mood.

We string the beads and twist them into a spiral.

If desired, we connect two or three spirals, or more. It all depends on your taste.

Author Marina Zyablova

Beautiful Christmas trees made of beads.

Pendants-decorations for a fluffy beauty.

To work you will need:

Green beads (mixed 2 colors light and dark) as the main color of the Christmas tree;
- colored beads for the “garland” at the Christmas tree;
- wire (I have thin copper);
- bead (on the top of the Christmas tree);
- (for the leg) little thing, see as in the diagram above:

We take 3 pieces of wire, about 25-30 cm each, put them together and twist them in the middle by 2 cm.

We bend it in the middle, form a loop and twist it about 1 cm down.

We put a bead (of any beautiful shape) on this twist and straighten all 6 wires under the bead - the twist remains only under the bead.

We string beads onto our 6 wires - 2 wires with green beads, then 1 with colored beads, then again 2 with green and 1 with colored (you can see everything in the photo). Somewhere around 6 cm we ended up with pieces with beads.
You can make any colored “garland” (for my version, see photo No. 11)

To prevent the beads from flying off the wire, we make a twist loop at the very ends (then it will be cut off).

We fold our wires strung with beads (all of the same length - mine are 6 cm) in the same order - 2 green, 1 colored... as in photo No. 8. And twist all the wires together (where there are no beads).

We bend the wires in the form of a “pepper”.

Holding the top with one hand, the bottom with the other, twist as in the diagram (photo No. 3) where the number is 7

Just twist the wire under the Christmas tree

In winter, the most long-awaited holiday for us is New Year. At this time, I want to believe in fairy tales and miracles. It is a tradition for everyone to decorate the New Year tree. But not many people know that you can make it with your own hands from beads, and thereby decorate your home.

The master class on weaving a Christmas tree from beads with your own hands, given in the article, will help you do this easily and quickly.

Spruce beading includes the following components:

• rectangular beads of emerald color;
• chocolate-colored beads;
• plaster or alabaster solution;
• wire;
• pot or decorative vase;
• beads;
• glass beads

All our accessories are ready, let's get to work.

A homemade beaded spruce, according to the diagram shown below, consists of an upper part and ten levels of branches. Let's start with weaving with our own hands, the covering part of the Christmas tree. We cut off the wire, fifty in length, and string a golden-colored bead, an amber bead, and a straight emerald bead. Through the two ends, insert a white, amber, silver and green thing. Next, on each edge, string four green colors.

Twist the edges in a circle. Make loops at the ends of the wire and string the following beads: four green, two chocolate and the same number of emerald.

After this, scroll the edges in a circle twice and fold two loops.

Our weaving master class continues. We now have a homemade spruce top. Let's move on to the branches. Four pieces of fishing line, each twenty centimeters long. Build three loops on each and collect the following quantity of pebbles: three emerald, two chocolate and three emerald. Twist the edges after each loop five turns, in front of the remaining loop, turn three turns.

We move on to the third level and begin beading branches. We unwind four pieces of fishing line, each thirty in length. We make five loops with beads on them, only on each one. Make the primary loops the same as in the second tier. In the final two loops, string four emerald stones.

Scheme of the fourth tier of spruce. We unwind eight segments, each thirty centimeters long. We create five loops on each. Cast on the first three loops according to the previous diagram. And increase the number of beads to six. After casting on five loops, wrap the ends several times. Combine all the branches in twos and twist the ends.

Unwind 4 strips of fishing line, each thirty centimeters long. Make seven loops with beads on them. Create the primary ones as in the second phase, and in the last phases, create six emerald stones.

The first half of the tree is finished. We cut off eight pieces of our fittings, thirty centimeters each. We make five loops, such as in the previous diagram. Combine two branches at a time, twisting them with wire. As a result, you get four branches. A voluminous homemade spruce made of beads, the weaving pattern of its sixth row branches is shown in the photo.

Four more segments of sixty cubes. Cast on a loop in the center. On one edge of the fishing line, twist seven twists, following the pattern of the sixth tier. Screw another piece to the branch.

Eight more segments of wire, 35 and 60 cm long. In sixty centimeter lengths, twist the branch as in the seventh phase. Twist five loops onto a wire branch thirty-five centimeters long. Twist the small branch and the large one together.

The master class and diagram of our spruce are coming to an end. The very last is the ninth and tenth level, the weaving of which is carried out according to the previous pattern.

The tabletop homemade spruce is ready, now you need to assemble all the parts.

Spruce assembly

Wrap the wire around all rows in a helical motion. The trunk of our tree is thick and will not bend. The gap between rows needs to be increased.

Place the finished spruce in a suitable pot or vase.

Pour the foundation with plaster or alabaster solution to secure the spruce well.

Decorate the tree with decorative stones, foam snow or moss.

Under the spruce you can put small figures of forest animals, gifts and Santa Claus. The master class using beadwork and Christmas tree patterns is over. In the end, such a spruce appeared. You can also watch a video for beginner needlewomen.

Now you will have a festive mood that you can give to your loved ones. The spruce is always green and pleases with its juiciness. It is not possible to grow it on a window at home, but you can make beadwork with your own hands according to the pattern. We offer a master class on a pattern showing the beading of a Christmas tree.

Video: Spruce weaving for beginners

Forest tree diagrams

It is necessary to prepare the accessories:

• a couple of green beads;
• bugles of the same color;
• beading material;
• decorative decorations.

Let's start making the holiday tree.

We connect two meter lengths together and twist any of the edges.

String beads on all ends, and then five pieces of glass beads, as shown in the picture.

Two more bugles and one pebble.

We look at the drawing and continue to do it.

After creation required quantity branches, they must be twisted together with a distance of one centimeter. The base of the fishing line is secured in several ways:

• it is allowed to fill the mold with a solution of alabaster or plaster, sprinkling sand, pieces of cones or shiny pebbles on top;
• tie the ends to the stone;
• You can attach it to plasticine with your own hands.

Spruce weaving patterns

We showed you excellent beading options and a master class on how to weave a festive Christmas tree with your own hands. We hope that after this, you will not want to cut down a real spruce in the forest for the New Year and Christmas holidays. After all, it is much more interesting to do beadwork with your own hands, together with your children, on a cold and frosty evening.

And if you don’t have enough space in your house, then the option of weaving a tabletop Christmas tree from beads with your own hands is just for you. And small children will not be able to get it and get hurt with toys.

It is very pleasant to create beautiful things with your own hands. This activity is exciting for every craftswoman. Craftswomen really enjoy working with beads. There is no need to be surprised by this! After all, beads of various colors can resemble expensive stones. For the New Year, mini-Christmas trees are often made from beads. Therefore, in this article we will tell you how to make a Christmas tree from beads for beginners.

How to make a Christmas tree from beads

First master class.

Today there are many master classes on creating Christmas trees from beads. It is worth saying that a beaded Christmas tree can be an excellent souvenir for every person. Look at 1 master class with step by step photos for beginners. Remember that you will probably succeed.

For this tree it is worth using a rod. In this case, use a toothpick. And the pedestal will be an ordinary coin. In order to make a Christmas tree for the New Year, you need to stick a toothpick into a flat bead that is smeared with glue. Glue it to the coin. In order to make the branches you need to follow the diagram. After that, attach them to the trunk. On top you stick a star, which is a figured bead.

Second master class.

A Christmas tree made of beads, which you can simply make with your own hands, can be an excellent and also useful gift. To create a keychain you need to prepare:

• large transparent green beads,
• small gold opaque beads,
• a large curly bead that will have the shape of a flower,
• a gray bead that you will use as a base,
• thin wire.

This craft is very easy to assemble. Rely on the scheme we offer you.

Third master class.

You can make interesting women's jewelry from beads. If you make earrings, you can give this jewelry to your close friend or sister. To create earrings you will need special fittings. You can purchase it in a specialized store. For crafts, it is worth purchasing bright beads. Then the craft will look bright.

Fourth master class.

Before you start weaving this Christmas tree, you need to prepare everything necessary materials. You will need:

• Chinese beads, white and green,
• wire that has a diameter: 0.3mm, 1mm, 0.4mm,
• brown thread,
• plaster mold and solution,
• varnish based on acrylic and paint.

Step-by-step master class.

At the first stage, it is worth mastering the needle weaving technique. It is in this technique that it is worth forming single branches for crafts.

After this, it is worth cutting the wire to a size of 20 centimeters. On this wire, collect 8 emerald colored beads and one white bead.

You should push one edge through all the beads. However, there is no need to thread the last thread. As a result, you will get your first needle.

The above manipulations must be continued. In this case, it is necessary to add and subtract beads in needles from 9 to 5 pieces. You need to do this until the 20 centimeter thread runs out.

And to make a real Christmas tree, you need to make 17 such branches.

In order for the Christmas tree gift to receive the correct shape, you need to make branches that consist of double and triple needles.

The completed workpiece should be twisted. However, do not twist it all the way. Leave a small edge. It is worth attaching one twig to the end and tightening it with the last part of the needle.

As a result, you will get a double spruce branch.

Thus, it is worth making triple blanks. A total of 20 such blanks will be needed.

Now that all the blanks are ready, you need to move on to assembly New Year's gift. As a rule, the Christmas tree begins to be collected from the top. First, take a wire with a diameter of 1 mm. The top of the head is tied to this piece.

Then 4 short ordinary branches are tied to this piece. As a result, you will be able to make a primary tier. Continue winding triple and double blanks.

If you finish doing this work, you will have a thick spruce base.

Form a trunk and wrap a piece of wire around the trunk.

If you have completed all the steps, then you should fill the base of the product. Remember that this affects the height and stability of the craft. To make the base: dilute water and plaster in equal proportions.

Then you need to insert the craft into the container. In this case, you must trim off unnecessary parts.

Now wait until the solution hardens.

The tree trunk needs to be painted with acrylic based paints. After this, the barrel must be varnished.

If the product is completely dry, you need to straighten the branches of the craft. The craft will look more beautiful.

Finally

As you can see, the Christmas tree craft made from beads looks very nice. This product can be a wonderful gift for anyone. Therefore, when thinking about what to give to your loved one, take advantage of our step-by-step master classes. Surely, you will end up with something interesting and very attractive.

Never before has a toy looked so natural. These little fluffy beaded Christmas trees with a touch of white snow on the tips of their green paws just make you want to smell them. Alas, they do not smell like pine needles. Crafts in the form of New Year trees can be voluminous and flat, decorated with bright toys or simply dusted with white snow.

Flat herringbone

I present to you video 1, which shows how to make a beaded Christmas tree with your own hands, which can be hung on a real Christmas tree as a decoration or decorated as a keychain. The weaving pattern is quite simple. A master class on making a Christmas tree from beads is shown in detail and clearly. Even a novice craftsman can weave a flat Christmas tree.

Earrings made of beads and Czech stone

In video 2 you can watch a master class on how to weave earrings from Czech stone and beads in the shape of a Christmas tree with your own hands. The earrings look so elegant and original that you simply need to make them to wear them on the most important holiday of the year.

In the same way, you can create a whole set by complementing the earrings with a pendant in the shape of a Christmas tree. Manipulating a needle looks so natural and uncomplicated that it seems as if this work is not difficult at all. It is so indeed.

Christmas tree made of beads

In order to weave a New Year's beauty with your own hands, you will need:

• wire with a diameter of 0.3 mm.
• white beads – 20 g
• green beads – 80 g;
• A master class on creating a Christmas tree begins with weaving a branch. We collect 2 white beads and 7 green ones. We pass the upper end of the wire through the second white bead and all the green ones. One top white bead remains locking. This will happen on all branches.

• We collect two more whites and 9 greens. We thread it back through the second white and five green beads. We repeat this operation 6-7 times. We tied the first branch with our own hands. Our beaded Christmas tree will consist of several such branches.

• The first branch, as the diagram shows, will become the crown of the tree, and the wire will become its trunk, to which other branches will be attached. For rigidity, you can wrap the barrel with electrical tape.

• The master class ends with the beaded Christmas tree being installed in a small bucket with cement mortar or other ballast. This tree compares favorably with a real New Year's beauty in that it does not burn and you can safely light candles near it.

Beaded lace tree

The production of this craft is fundamentally different from the technologies described above. It consists in the fact that we first collect long beads, and then begin to weave patterns and lace from them.

Herringbone spiral

To make a master class of such a spiral Christmas tree, we need a special rigid spring wire and large beads. We choose the color according to the picture: green, red and white.

The weaving itself, as can be seen in the photo, is very simple. This is not even weaving, but simply stringing beads in any sequence you like onto a wire. After securing the ends of the beads, you need to give them the shape of a conical spiral. Why not a Christmas tree?