How to weave modern beaded baubles. How to weave baubles from beads? Weaving patterns Schemes for weaving beaded baubles on a machine

Do you like bright and original handmade bracelets? These are baubles, they are woven by hand from leather, ribbons, or beads, or maybe baubles, which are ideal for beginners to master this type of needlework. In our article we will tell you how to weave a bauble from beads and look in detail at the patterns and methods of weaving both with and without a machine.

Beaded baubles with patterns for beginners

Before weaving, let's look at what baubles weaving techniques made from beads exist.

Cross weaving technique

• high-quality beads (Czech or Japanese);

• needles;
• thread or fishing line.

To make beaded baubles using the following weaving patterns: you need to take two needles and thread them onto both edges of the thread:

1. String four beads onto the right one and place them in the center of the thread.
2. Pass the left needle crosswise through the fourth bead.
   
   
3. The first link of your chain is ready, and the needles have been swapped.
   
   
4. Place one bead on the left needle and two on the right needle.
   
   
5. Pass the left needle crosswise through the seventh bead, and you have the second link.
   
   
6. Continue weaving until you get the length you want.
   
7. 
   

Weaving technique

• Select the desired bracelet width and string required amount beads
• Pull the line through the penultimate bead.
• In this case, the last bead collected will become the first in the 2nd row.
• Continue with the pattern below.

Flower weaving technique

It is too very simple circuit weaving:

1. Thread 8 beads onto the thread.
2. Close them into a circle through the first bead.
3. Pass the needle through the beads again to come out of the eighth again.
4. Pick up the ninth bead in a different color and, dividing the ring in half, pass the needle through the fourth bead (on the opposite side of the eighth) and go out.
5. Place 6 beads on the needle, closing them in a ring through the fifth and fourth beads.
6. Go around the thread and come out of the fifth bead.
7. Place the sixteenth bead in a different color on the needle and pass through the twelfth bead (through the one opposite to it).

Having studied the basic weaving techniques, we begin to create beautiful beaded baubles.

Simple beaded baubles

For weaving the simplest bauble you will need:

• a thread;
• needle;
• beads;

• beads;
• lock.

Let's get started:

1. Take 4 pcs. threads (their length depends on the desired length of the bracelet).
2. Thread them through the bead and secure them to one part of the clasp.
3. String the beads not very tightly (choose the color according to your desire and imagination).
4. Thread the threads through a large bead and fasten it to the second part of the clasp.
5. The bracelet is ready.

To weave a braided bauble you need:

• fishing line;
• beads of any three colors, but of the same size;

• large beads – 2 pcs.;
• clasp.

We weave:

For the bracelet you will need:

• small beads;
• transparent beads;

• fishing line (thin);
• lock (consists of two parts).

1. Take 2 pieces of fishing line.
2. Attach the fishing line to one part of the lock.
3. String beads onto each line so that the length of the chain of beads is approximately 3 cm.
4. Now thread two fishing lines into a transparent bead and come out of it (this is the first petal).
5. Place 2 beads on each line separately.
6. Now again pass both fishing lines through the bead, only of a different color (this is the core of the flower).
7. Turn the lines in the opposite direction and thread each of them through two beads.
8. Tighten and thread both lines into another bead.
9. The first link with the flower is finished.
10. Similarly, weave the required number of links.
11. Finish the bauble in the same way you started.

For such a cat you will need:

• beads: white translucent, soft pink and one blue for the eye;
• fishing line and a narrow ribbon.

1. Weave a cat according to the pattern.
2. When it is ready, you need to braid a small bracelet on both sides.
3. Thread the line through the bead at the edge of the muzzle.
4. String three beads onto both ends of the fishing line.
5. Pass both ends of the fishing line at once into one bead.
6. Again, string three beads onto each line.
7. And again, close the circle with one.
8. This must be done 5 times.
9. Using a needle, weave a ribbon into the resulting bracelet: pass one end of the ribbon along the top through the holes of the bracelet, and thread the other end along the bottom. At the end, make a few not very tight knots and leave about 10 cm of free tape, and melt the edge (to prevent unraveling).
10. The same must be done on the other side.

The gentle cat bauble is ready.

Patterns for weaving cat baubles from beads can be as follows:

Weaving personalized baubles is very popular. They can be woven using patterns on a loom or using the cross-weaving technique.

Here is a photo of beaded baubles woven using the cross technique:

And here is a photo of the woven ones on the machine:

When loom weaving, use the following patterns of capital and block letters:

And when weaving using the cross technique, you pick up one top chain, and then go down and weave along one line. Such diagrams are easily drawn up on a sheet of paper in a checkered pattern.

birch beads or decorate your interior. The main thing is to try and don’t stop there. Write what you succeeded and share your experience.

Baubles first appeared among Indian tribes in North America. This accessory served not only as decoration, but also as a protector against dark forces. Now almost everyone wears them. This beautiful attribute emphasizes the individuality of the owner, especially if made by hand. Weaving does not take much time, and can become an exclusive gift for your other half, younger brother or sister.

Preparation

Material

If you have never made bracelets, the simplest material is two ribbons. There are many technologies, but without experience, it is better to use those that are simpler. In addition to ribbons, you can take:

• Floss threads.
• Beads.
• Skin.

Some craftsmen use any material that is at hand, as long as it can be tied into a knot and pinned.

Workplace

When weaving for the first time, it will take more time, so it is better to clean the table and place it on it. necessary tools and concentrate to remember everything and avoid mistakes.

There should be nothing superfluous in the workplace so as not to interfere or distract. Tools you will need:

• Needle.
• Pin.
• Material for weaving (floss threads, ribbons or beads).

Main types of nodes

Sometimes their own technology is used, but there are two basic options. We need to start with them.

• Right loop knot. The working thread is located to the right of the knot thread.
• Left loop knot. The working thread is to the left of the knot thread.

The knotted thread is the thread with which the knot is tied, and the working thread is the thread around which it is tied.

Knots that are tied in twos

• Straight knot. The process is similar to the previous one, only instead of one node, two are made in a row at once. The working thread should be on the left.
• Reverse knot. Very similar to straight, only the working thread is on the right.
• Left tatting. The knot is much more complex than the previous ones. Use it when you learn simpler techniques. In the starting position, the working thread is located on the left. First we tie the left loop knot, and the working thread should go to the right. Using the right thread, we make a corresponding right loop knot and repeat the process.
• Right tatting. The same as the third knot, only the thread is initially located on the right.

In words it may seem that weaving baubles at home is a complicated process, but in reality everything is much simpler. You can even use various diagrams that show how to cross the working and knotted threads.

Ribbon weaving for beginners

You will need two or four satin ribbons (depending on the weaving method), a needle and a pin. Tapes must be meter long.

I advise beginners to use ribbons, because they are wider. The working and knotted threads are more clearly visible, and you understand where to tie a knot and why.

Training option for beginners

1. We put two tapes on top of each other, bend them fifteen centimeters and put them on top. It should look like two knots. For convenience, you can use a pin to secure the result.
2. We bend the top buttonhole to the other side, as if tying an ordinary knot.
3. Go all the way around the bottom band to return to the starting position, but now the buttonhole will be smaller.
4. Through the resulting loop you need to insert the working tape (which remained free all the time).
5. Pull the end of the small loop, only slowly and carefully. The knot should not be tight.
6. We make another loop and thread it through the fold that remains.
7. The long edge needs to be pulled up and the second loop secured. If necessary, you can tighten the ends to make the pattern even. If you can see something like a square, the job is done correctly.
8. All that remains is to continue repeating steps 1-7 until the thread runs out. The finished bauble can be fastened with something and worn on your hand.

Video lesson

Round bracelet made of ribbons

In this case, a Chinese knot is used, which is called “lotus”. Weaving will take about an hour of free time, so it’s better not to be distracted in order to get a beautiful result the first time.

You will need:

• Ribbons of two colors, two and two and a half meters. Or four ribbons of one and a half meters (different colors).
• Pin for securing the material.

Step by step plan:

1. Let's look at the option for two tapes. We make a cross and secure the middle with a pin. Moreover, there will be a light ribbon on top and a dark one on the bottom (for a more visual example).
2. We take the tape that lies below and use it to make an arch shape to the left. The lines must be parallel to each other, otherwise the bauble will turn out crooked.
3. We do the same with the light tape, only the arch will be perpendicular to the dark tape.
4. Now we bend the right end of the dark basma, the one that goes below the center, like an arch to the right, only it should be upside down.
5. We do the same with the light ribbon, which should be folded approximately at the place where the second arch ends.
6. We first tighten the knots lightly (the pattern looks like a square), then the main material needs to be secured with force. To do this, we tighten it again (the picture should resemble a crumpled lump).
7. Repeat steps 1-6 until the very end.

Peculiarities:

• Working with ribbons is simple, but a beginner should use a pin as often as possible to secure the result.
• This is convenient in cases where you need to go somewhere and don’t want the nodules to relax and become ugly.
• Basically, the pattern of ribbons initially looks like a small square, hence the name - the square weaving method.

Video example

How to weave beaded baubles

Beading is more complicated than the previous method, you will have to spend more time learning the basics, but the result is worth it.

You will need:

• Beads (must be of high quality, same size).
• The fishing line made of lavsan or nylon must be strong.
• Clasp (if necessary).

Weaving methods and detailed description

To speed up the beading process, professionals use a machine on which the lines are tensioned and secured in opposite directions. You can make a similar design yourself, but let’s look at simpler and less expensive methods.

Braiding

You will need:

• Multi-colored beads.
• Clasp for bracelet.
• 3 fishing lines of the same length (70 cm is ideal).

Execution sequence:

1. We fold a piece of fishing line in half and fasten it into the clasp ring.
2. For all 3 fishing lines we collect the same length of beads (about 35 cm).
3. We secure the ends of the fishing line segments to the second ring of the fastener.
4. It turned out 3 rows of fishing line: top, middle and bottom. Place the top row on top of the middle one.
5. Then we place the bottom row on top of the top one.
6. Place the top row on top of the bottom row.
7. We repeat the procedure 4-6 times until the bracelet is ready.

If you increase the length of the fishing line, you can get not only bracelets, but also neck jewelry. If you have some imagination, you can add gems by making small holes in them so that they can be strung on a fishing line.

Video tips

Cross weaving

You will need:

• Beads.
• Lavsan thread.
• Two needles.
• Clasp.
• Weaving pattern (final pattern).

How to weave:

1. We measure the circumference of the wrist. Cut one meter from the thread or fishing line. We thread both ends through the eye of the needles.
2. You need to put half a clasp and one bead on one of the needles. With the second needle we pass through the same beads.
3. Gradually thread one bead on each side.
4. We thread both needles through the next thread again, and then tighten it. You should get a cross.
5. We perform points 3 and 4 again.
6. We continue until we finish the bracelet.

It is worth noting that there are different variations of weaving. In our case, the bracelet will be very thin, but it can be expanded if you slightly change the steps.

Popular schemes

People like to use beads for weaving baubles because they can create a pattern of any complexity. The pattern itself is called a pattern. Cross weaving is most often used, but in some cases the methods differ.

Popular patterns:

• Intertwined (weave beads of different colors, looks very beautiful).
• Pattern with various animal faces.
• Inscriptions. If you write something non-standard, you will have to create a diagram yourself or ask an experienced craftsman to do it.
• Hearts. The simplest element with a pattern.

The list of schemes can be continued indefinitely. The procedure is somewhat reminiscent of knitting, but with a slight difference.

Beaded baubles with names and titles

Weaving a personalized bauble as a gift is a great idea. Some even create logos of their favorite bands or movie titles. The only limitation is the imagination of the needlewoman.

To weave a beaded bauble with a name or title, two methods are used:

1. Machine tool. It will take a lot of time, and you need to have a machine, or make it from scrap materials.
2. When weaving with a cross. The method is suitable for beginners.

In the first case, standard printed letter patterns are used, in the second you will have to work on your own, using a notebook sheet. One cell - one bead.

You can take only two colors, one is the background material, the second is for the letters. With logos it is more difficult, because drawing up a diagram is not easy.

Video instruction

Baubles made from floss threads

To begin, secure the threads in one of the following ways:

• Using a stationery clip.
• The threads are tied into a knot and secured with a pin.
• The threads are attached to the table surface with tape.
• Using a tablet and a ruler.

Weaving is a painstaking task that requires perseverance, but it is the most economical, because the only material required is thread.

Methods for beginners

First, you need to decide on the nodes with which you will create a masterpiece. This point is similar to what was described in weaving from ribbons; the right and left loop knots are also different.

Oblique weaving

You will need: 12 threads 6 colors. Moreover, the same colors should be located symmetrically to each other (that is, the outer ones are always the same). Acceptable length is from 0.8 to 1 meter.

Subsequence:

1. Threads 1 and 2 intertwine to form a “four”. The end of the first thread is threaded through the resulting window, eventually a knot should appear.
2. The procedure is repeated, there should be two nodes.
3. Now a similar process should happen with threads 11 and 12, then 3 and 4, 10 and 9, etc.
4. After this, knots are tied on the original threads.
5. All points are repeated again.

It is better to fasten the resulting bauble with an additional knot so that it does not unravel.

Straight weave

It is more complicated than the previous method, and the pattern turns out to be unique, and not in the form of a Christmas tree. Weaving patterns are also more complex, but the result will be more impressive.

It is worth distinguishing between the threads that will be background and those that will serve as the outline of the pattern. The easiest way is to use two colors.

The patterns depend on the pattern, so before use, find the required pattern, calculate the number of threads that will be required for it and select the colors.

1. If the knot is incorrect, slowly and carefully unravel it.
2. Sometimes the pattern at the end is different from the beginning. Don't be upset, because every failure is followed by victory.
3. If you are a beginner crafter, first use more simple ways.
4. Don't be afraid to experiment with patterns; you can always add something unusual to them.
5. If the desired result is an inscription, do not make it long, otherwise the bracelet will turn out longer than expected.

Weaving baubles is an interesting and productive activity that you can learn at short time. It trains fine motor skills, perseverance, enriches imagination. But mastering the method will require patience and a willingness to correct mistakes. The bauble will be an excellent gift for a friend or boyfriend, for a couple in love, because it is original and cute.

Good day, dear needlewomen! Well, have you already tried to weave hearts from beads? "Learning to weave a heart from beads". What happened to you, share in the comments.

Today we will talk about beaded baubles.

In this article we will look at:

1. What are baubles?
2. Where did they come from?
3. How to weave baubles from beads.

I have also collected for you patterns for weaving beaded baubles in a convenient form.

History of baubles

A bauble is a bracelet made of leather, laces, beads, ribbons or threads. The name of the word “bauble” or “fenka” comes from the English word “thing” (thing, object). In some nationalities, the bauble is considered a symbol of friendship and love.

Initially, baubles were considered bracelets and belts made by Indians from North America. Such accessories were, of course, not created for beauty and art. Each bauble with an individual design and ornament carried a whole story.

Even then the pattern of weaving baubles was known. Each bauble had its own meaning. Everyone was involved in weaving. Bracelets united warriors and signified the brotherhood of peoples, and belts were passed on to each other as a sign of alliance.

Gifted belts and bracelets were never removed; this was considered bad manners. We wore baubles until the accessories were torn.

Today, baubles are made from numerous materials: beads, laces and ribbons, leather, wire, threads. You can wear them every day, even to formal events.

Nowadays there are many known patterns for weaving various baubles. Using a certain ornament and color of jewelry, masters still put their own meaning into it.

If you use regular cotton threads in weaving beaded baubles, rather than special ones for beading, it will be easier to work if the end of the thread is dipped in glue or nail polish. This is necessary so that the thread does not bend, making it easier to string beads onto it.

There are two ways to weave beaded baubles: manually and on a machine. It’s naturally easier and faster on the machine. Today you can not only choose any option for a beading machine, but also find many patterns for weaving baubles on a machine. The photo below shows hand weaving.

Give a bauble to your friend and she will definitely not remain indifferent!

In this article I tried to put together the most popular and beautiful schemes weaving baubles from beads from various sources. Here you will find beaded baubles for beginners, as well as more complex patterns.

I have created a separate folder, which I offer you for general use. You can download a folder with 50 patterns for weaving beaded baubles from the link...

If you have new ornaments, share the pattern, show your finished baubles, ask questions and write comments. And, of course, do not forget to subscribe to updates on our site. Bye bye!

P.S. Do you think women should be allowed to drive? Or are these just stereotypes that a woman driving is like a monkey with a grenade. It’s just that lately there have been so many accidents caused by women. I’m already starting to be afraid of them myself. What do you think?

Beads have always been very popular. They complemented clothes, made necklaces from it, and made embroidery. The hippie era added one more name to this list - baubles. These are bracelets made of beads and floss threads, wire or fishing line. Ornate, bright patterns began to adorn the wrists of both men and women, and they were given as a sign of friendship and gratitude. Anyone can learn such a simple art as weaving baubles from beads. A little patience and imagination - and a simple and beautiful bracelet is ready.

Where to begin?

In order to understand how to weave baubles from beads, let’s look at the types of beads that are used when weaving baubles. The main criteria are quality, cost, manufacturer. Information for beginners:

• size - calculated by the number of beads placed on a thread 2.54 cm long;
• shape - it can be round, with a square hole, long, in the shape of tubes or snowballs (that is, glued tubes);
• color - transparent, matte, shiny, painted inside, etc.

Which type of beads to choose depends on the pattern and preferences. But it’s better to start with the easiest square beads to process.

• floss threads - suitable for opaque beads;
• fishing line is the best option for many bracelets, it allows you to avoid using a needle, the material is durable, and its transparency makes it possible to work with bugles;
• wire - you can also work with it without a needle, but you should choose carefully, as it can break at bending points. Copper is best.

In addition, we need fasteners, thin needles, pins, a machine for weaving beaded baubles with names and designs. By the way, it is better to make it yourself, since ready-made options are designed only for specific types of crafts and do not allow you to show your imagination.

First steps. Simple circuits

The simplest bauble is accessible even to a child. In order to weave your first bracelet, we take beads of two sizes: small and large (about 4 sizes larger than the previous one). The color doesn't matter because we're still training.

For convenience, it is recommended to start working with fishing line. We measure the volume of the wrist and add another centimeter to this value, multiply by two. For example, the volume is 23 cm, then the length of the fishing line should be 48 cm. Next, fold the base in half. We string 5-7 beads on each side. They will come together at the bend, but this is not scary. Then we take a large bead and thread baubles through both ends of our skeleton. The result is a loop, the base of which is crowned with the largest stone.

Next, we again add 5-7 beads to each thread (the number should be the same both in each loop and on each side) and again a larger one. We continue until the line runs out. We fasten the ends with a hook clasp, put it on your hand and enjoy your work.

Bauble braid

Simple beaded baubles for beginners can be made without any special skills. One of these is the braid. To do this, from our casket we select:

• thin fishing line;
• beads of three colors, but of the same size;
• two large beads;
• fasteners.

The actions are simple. We cut the fishing line into three equal parts. It is recommended to take a longer one, with a reserve. We secure the three ends with a clasp and thread a large bead through them - this is our base. Then we string beads of the same color onto each thread until the very end. Thus, we will get three threads of different colors.

Now we braid the resulting three strips into a braid. We leave the line about a centimeter without beads, thread the second large pebble and secure it with a clasp.

A little trick: while you haven’t yet gotten your hands on the correct combination of colors, we recommend taking different shades of the same color - you won’t go wrong.

It is allowed to make braids of four, five or more strands. They turn out thicker and more original. But to do this, you need to understand the palette of colors and colors that best combine with each other.

Baubles with ornaments

When the stage of simple baubles has been passed, it’s time to move on to more complex patterns.

You can find any design for a bracelet on the Internet. But if the soul requires something unique, then we take a piece of paper in a box and draw our own ornament. This picture resembles a greatly enlarged primitive image made of pixels. The technology allows you to accurately calculate the number and shape of beads.

So, we need:

• pebbles of different colors, according to the diagram, but of the same size;
• fishing line or wire;
• fasteners.

As in previous cases, the first step is to secure the clasp. We thread the first bead. After this, we pass one end of the fishing line through two beads. We do the same with the second end, but on the reverse side. We increase the number of beads according to the diagram.

When the required width has been achieved, we continue to work, but without adding beads, but simply changing the colors as required by the schematic image. When the ornament is finished, just as gradually as we started, we reduce the beads in the row, thread the final bead and secure it with a clasp.

Openwork bracelets-baubles

Perhaps the most difficult bead bracelets to make are openwork ones. They are not only extremely beautiful, but also diverse. Let's try a simple option. Choose:

• for a beaded bauble, weaving patterns;
• large beads, about 6 mm in diameter;
• small beads of your favorite color;
• two needles and threads (it is better not to use fishing line or wire);
• fasteners.

We clamp the thread in the middle. We put three small beads on each end and one large bead on both ends. Repeat the repeat until the desired size is obtained. Then, using the third thread, we create a snake of beads, threading it through the larger ones. We secure the ends and wear them with pleasure.

Baubles with names

How to weave beaded baubles with names? Exactly the same as bracelets with ornaments. Select the design and materials. Then the principle of weaving does not change: clasp, two threads, bead to the beginning. Then we dial in the required width, change the colors in the background and letters, and finish with a bead and a clasp.

In order to choose a pattern for a beaded bauble for beginners, you don’t have to storm the search engines - you can draw it yourself on a piece of paper, just like you drew the ornament.

Where to look for diagrams?

Any beaded baubles, names, patterns can be found in master classes. But most often, in search of an original drawing, you have to scroll through images for more than one minute.

Schemes on how to weave baubles from beads can be found without digging through dozens of Internet pages. Look on your mother's shelves for a book on cross stitching. Drawings from it can be successfully used as a basis for weaving.

Also, don’t disdain Japanese crosswords. Black and white can be replaced with any other colors, or even choose colored options.

The only drawback of the schemes mentioned above is their large size.

Tricks and life hacks

To make it easier and more reliable to secure the ends of the bracelets, they should be moistened in colorless varnish.

If you are working with sharp beads, do not use thread as the edges of the beads may damage the thread.

It couldn't be easier to make a bracelet using smart wire that keeps its shape. String the beads onto the base and make loops at the edges. An ordinary glass will help give it the shape - just wrap the bracelet around the glass and then remove it.

The answer to the question of how to weave baubles from beads is simple if you have mastered the basics: patiently, with imagination, carefully. Good luck!

Beaded baubles are a symbolic item into which the author puts a certain meaning and energy. Baubles are woven as a sign of love and trust for family and friends. Weaving from beads is much more difficult than from floss or satin ribbons. But we will try to understand all the subtleties. We will tell you in detail how to weave baubles from beads and show you in master classes.

Preparation of the workplace

Working with beads is very painstaking work. Therefore, the workplace must be properly equipped to make it comfortable. Then the creative process will be a joy.

Firstly, you need to provide good light source. Any microscopic work (embroidery, knitting, beading) creates severe strain on the eyesight. Ideally, beading should be done in daylight. But often we cannot afford this and we do handicrafts in the evenings, so we must have a good table lamp.

Secondly, you need to acquire a small a piece of plain matte fleecy fabric. It makes it easier for the eye to perceive beads. It can be felt, felt, velvet, tapestry, velor. Due to their texture, these fabrics prevent beads from scattering on the table.

Thirdly, it is necessary to equip the workplace storage system. So that a variety of all the materials needed for beading are always at hand.

Materials for weaving beaded baubles

The main material, of course, is beads, which today are presented on the market in a huge variety.

ARTICLE ON THE TOPIC

Fishing line, wire

In addition to beads, we will need fishing line, wire, threads (including elastic ones). All these materials are presented on the market in various colors.

Elastic threads

The stores sell a lot of metal accessories for jewelry. But for baubles, carabiner clasps with several threads are a real godsend.

Carabiner lock with 9 threads division

Carabiner lock with 3 threads

In addition, you will need metal fasteners and even regular pins.

Tools for weaving baubles

From the tools we will need scissors, needles and any source of fire (candle, lighter, matches) for scorching the fishing line.

Beading needles

It is better to use special needles for beading. They are very thin with a small eye and longer than regular needles. In addition, beading needles come with a rounded end. Using special needles will make your work much easier.

Also, when weaving baubles from beads, you can use a beading machine.

There are a wide variety of beading machines available in the market. However, a self-made machine is quite suitable for weaving baubles. The most simple option will use a box lid.

Using a utility knife, make cuts on opposite sides of the box parallel to each other. The distance between the cuts should be approximately the same.

We fasten the threads and get to work.

Bauble on the machine

When making beaded baubles, the weaving technique, i.e. weaving using a machine, is more suitable for beginners.

To work we will need:

• machine (we will use a homemade one)
• beads
• strong threads
• beading needle
• scissors

1. Tightly fasten the required number of threads. There should be one more than the number of beads across the width of the bauble.

2. Cut a long thread and insert it into a needle. We tie the end of the thread with a knot to the outer thread on the machine. From knot to knot, you need to leave enough length to make fasteners at the end.

3. We collect the required number of beads on the needle.

4. We pass the needle under the threads on the machine.

5. Distribute the beads between the threads, one bead at a time.

6. We pass the needle through all the beads over the stretched threads.

7. Tighten. The result is the first row of baubles.

8. We weave the second and subsequent rows in the same way.

9. Alternate the colors of the beads depending on the pattern.

10. When the bauble has reached the required length, we secure the working thread with a knot on the outer thread on the machine. We did the same at the beginning of our work.

11. Remove the threads from one side of the machine.

12. Tie a simple double knot.

13. We do the same on the other side. We braid the ends or secure them with a lock. Fenechka is ready!

Original master class

Schemes of baubles for machine weaving

Be sure to try to weave baubles from beads, the patterns for which we have prepared for you:

YOU WILL NEED IT

Even more patterns for weaving baubles can be downloaded right now quickly and completely free of charge!