How and with what to clean, refresh, renew a dark, white and sheared mink coat at home after winter: folk methods, tips, a means for cleaning mink fur. How to clean or wash the lining of a mink coat? Cleaning a mink coat at home

Have you bought an expensive fur coat, purchased a fur vest or snatched a hat at an annual sale, but after a while the fur of the products became shiny and lost its shine and color? Well, it happens to everyone! But knowing how to clean fur at home, you can very quickly restore the presentation of your “fluffy wardrobe.”

Before starting work, decide on the type of fur, because each of them has its own cleaning methods. Let's talk about them in more detail!

Arctic fox and silver fox

Fur coats or vests made from Arctic foxes and silver foxes can be easily cleaned at home, if, of course, you stock up on any of the products described.

Method 1 - ammonia

Method 2 – hair shampoo

To thoroughly clean the natural fur of the Arctic fox, use your own shampoo. An alternative would be pet shampoo, wool and silk detergent, or pure gasoline.

Chinchilla, muskrat, otter

The animals themselves clean themselves with sand. So why don’t you and I use this method?

Mink

To clean mink fur, you can safely use the following recipes.

Method 1 – vinegar and alcohol

Method 2 – ammonia, gasoline, water

1. Combine 3 tbsp. l. salt, 0.5 liters of water and 1 tbsp. l. ammonia.
2. Treat the shiny parts with a swab.

Rabbit, goat, nutria and wolf

Rabbit fur will withstand any cleaning just fine. To restore your presentable appearance, choose any of these recipes.

Method 1 - alcohol and vinegar

Method 2 – bran (suitable for cleaning a white rabbit)

Method 3 – knock out the dust

How to clean white fur?

How to clean yellow fur from white fur? Be very careful not to spoil the pile and natural shade. First, try the product on an inconspicuous area, and then move on to cleaning the surface of the fur coat. Gives a good effect:

Be sure to hang your fur item in a well-ventilated area to allow it to dry completely.

Important! If you spill wine, juice, sauce, coffee, tea on a fur coat, vest or sheepskin coat, take it to the dry cleaner! Don't take any chances with a home remedy to avoid damaging your fur.

Artificial fur

Modern faux fur is made so beautifully that it cannot be distinguished from natural products. For “fox”, “raccoon”, “mink” - the cost of such products will be much cheaper. But this does not mean that faux fur does not require any care! Remember a couple of recipes that will help you clean it from dirt.

Method 1 - glycerin, alcohol and water

Method 2 – starch and dish liquid

1. Fill the starch with dishwashing gel.
2. Apply the paste to the faux fur and spread with a brush.
3. Wash away any residue with a clean sponge soaked in warm water. You can also leave the product until it dries completely, and then simply shake it off or brush it off.

Method 3 – machine wash

Unnatural fur coats can be washed in a machine on a delicate cycle. Spin cannot be used! Faux fur takes a long time to dry, so hang the product on a balcony or in a room with open windows. Make sure that it is not exposed to direct sunlight. However, this also applies to natural fur. The sun will make the pile brittle. It will also lose its shine and may turn slightly yellow.

Method 4 - gasoline for greasy stains

Wipe shiny pockets, sleeves or a fur collar with a cotton swab dipped in clean gasoline. An alternative to it would be a liquid for cleaning carpets and upholstery. In this case, follow the instructions on the package.

Important! The products will have to be washed off with water or a damp cloth!

Method 5 – powder and water

This is the safest and easiest way to clean faux fur!

1. Prepare a soap solution by mixing washing powder (1 tbsp; should not contain bleaches) and 1 liter of water.
2. Cool this liquid and apply it to the fur using a cotton swab or a regular washcloth.
3. At the end of the process, wash off the foam with a clean cloth soaked in warm water.

Now you know exactly how and with what to clean fur at home. But don’t forget about the nuances, because they are very important!

• Do not dry the fur item by hanging it on a radiator, ironing it or blowing it with a hairdryer;
• For natural fur, washing is strictly prohibited. The flesh should not get wet!
• Vinegar is contraindicated for faux fur;
• Do not use sawdust from coniferous trees for cleaning - they contain resin;
• Do not comb the astrakhan fur, just shake it well;
• If the fur has lost its shine, soak a cotton cloth in glycerin or table vinegar and run it through the pile. Apply alcohol on top and comb the fur with a comb. Do not repeat too often - vinegar makes the fur hard;
• To prevent the base of the fur collar from becoming rough over time, regularly treat it with a glycerin solution (1 part water and 1 part glycerin).

Video: bio-cleaning of fur:

Any white fur coat on a girl’s shoulders looks very beautiful and feminine. Everyone knows that these fluffy products require special care, and if this is not observed, the white fur coat will fade or turn yellow, completely losing its expensive appearance and attractiveness. Of course, this situation is very unpleasant, but there is a way out of it. In this article we will tell you how to clean yellow fur from fur at home.

Dry cleaning - is it possible?

Of course, the most the best option- Take the fur item to the dry cleaner. But:

• This should only be done when the item is heavily soiled.
• It must be remembered that mink fur can withstand a maximum of five chemical cleanings.
• This procedure is not affordable for everyone.

Therefore, if the fur is not that dirty, but has simply acquired a tint of yellowness, it is better to deal with it yourself at home.

Causes of yellowness

Before you begin directly cleaning such material, you need to find out the reasons for its color change and understand what we are dealing with. So, here are the main reasons for the appearance of yellowness on a mink coat:

• The product was eaten by moths. This can happen due to improper storage of the fur item or poor quality processing. Unfortunately, you can’t fix anything here, because you will have to completely replace the product.
• Excessive use of essential oils and perfumes. Overuse of such products can lead to discoloration of fur spots. Girls also need to remember that perfumed products should be applied to the skin, and not to clothes. In this case, the stains also cannot be removed.
• The fur fades in the sun, losing its original color. White fur is the most capricious in relation to the sun; it must be protected from exposure to rays.

Important! Girls, do not take fur products from the display window, so as not to wonder later how to clean a white fur coat from yellowness. Through the sun's rays, even if they fall on an object through glass, exposure to ultraviolet radiation still occurs. As a result, the item quickly acquires a worn and unattractive appearance.

Mink bleaching methods

Cleaning fur from yellowness at home is actually not a very difficult task. We have selected the most effective and simple ways to bleach mink fur at home.

Wheat bran

To effectively bleach a lady's white fur coat, we only need wheat bran. So, here's the procedure:

1. Pour the bran into a saucepan or any other dense container.
2. Place the container on the fire.
3. We constantly stir our bran, warming it well and making sure that it does not burn.
4. We place the fur item with the pile facing up to make it more convenient to carry out the procedure.
5. We sprinkle hot bran on our mink and carefully clean it with some kind of brush.

Important! After cleaning, carefully shake out the material and thoroughly vacuum it with a special nozzle.

We use gasoline, sawdust or starch

These methods include one common ingredient - gasoline. That's why we combine them into one method:

• Every pet store sells sawdust. In order to clean fur from yellowness at home, you just need to lightly moisten the purchased sawdust with purified gasoline, then clean your fur coat with this mixture.
• If yellow spot formed with oil, you need to mix potato starch with gasoline until you obtain the consistency of a thick porridge, then apply this mixture to the stain. After drying, you need to sweep away the dried “porridge” from the pile and comb it with a fine-toothed comb.

Clean the product with regular shampoo

If a girl notices very small stains on her fur coat, but she no longer wants to walk around in it, then she can clean her favorite item of clothing using regular hair shampoo. To do this you need to do the following:

We use peroxide and ammonia

What to do if a white mink coat turns yellow at the most inopportune moment, and there is very little time? Quick cleaning can be produced using ordinary hydrogen peroxide and ammonia.

To do this you need to follow this algorithm:

1. We make a solution from the means at hand: 1 glass of warm water, a teaspoon of hydrogen peroxide and 3 drops of ammonia.
2. We wet a large piece of cotton wool in the resulting solution and put it on a comb with a wide comb.
3. We clean the mink by combing it in the direction of the fibers.

After this, you can dry the fur coat with a hairdryer, or hang it in the fresh air to dry. It all depends on the speed of approach of the event for which you will need an expensive item of clothing.

Blue

Almost every housewife has a bottle with this name, the contents of which she resorts to using extremely rarely. So, her time has come. This method of bleaching mink fur is proven and effective.

In order to bleach pile using blueing, you need to:

1. Make a solution of blue and water: mix these two liquids to obtain a light blue solution.
2. We wet the sponge in this solution and carefully treat the yellowed surface.

Important! After the procedure, you need to hang the coat in the sun.

Whitening with vinegar

This method is the simplest.

In order to clean fur from yellowness at home using ordinary table vinegar, you need to moisten a cloth with it and wipe the fur with it in the direction of the villi. The result will be visible immediately.

Cleaning the lining of a mink coat

Of course, the ideal option would be to peel and then wash the lining according to the instructions. Otherwise, it may shrink or become deformed and simply not fit the fur coat.

A mink coat is not a cheap thing, so methods for safe cleaning have always interested its owners. Fur requires a delicate attitude; people do not always risk sending a fur item to the dry cleaner, because they are afraid that the craftsmen will ruin it. In addition, dry cleaning services are not cheap. Therefore, in some cases it is advisable to resort to household methods of cleaning mink products.

Carrying out proper care for a mink product, you can ensure its service life of up to 12 years. Too often the mink does not need to be cleaned; this must be done as it gets dirty. The time when you need to clean a mink coat can be determined by external signs:

• Dust deposits;
• Density;
• The hairs stick together, causing the fur to lose its fullness;
• Dulling of fur;
• Hair dirt.

When purchasing mink products, do not forget to purchase a special brush with metal bristles, which will be useful when cleaning the fur.

Methods and recipes for cleaning mink products

When cleaning a fur coat, it is important to remember that any careless action will lead to damage to the clothing. You cannot wash your fur coat; it will shrink and shrink in size. Mink coats can be cleaned in two ways: wet and dry. In this case, funds that are always available in the house are used.

Wet cleaning a mink coat is a more effective method suitable for removing deep dirty stains. Before cleaning, the mink coat is placed on hangers in a vertical position. After cleaning the fur coat, you need to comb it with a special brush and let it dry.

When drying, do not use a hairdryer or iron!

Shampoo, gel, soap solution

Heated soapy water is one of the most common methods for cleaning mink. The number of components is taken from the calculation of the volume of the fur coat. The longer and larger the fur coat, the more solution you need to clean it. Dissolve 100 ml in a bowl of warm water. shampoo, shower gel or regular laundry soap. Moisten a sponge in the solution and gently wipe the hairs of the fur coat with it, from root to tip. You can fix pieces of cotton wool on the teeth of a comb, and, dipping it in the solution, comb your fur coat.

Vinegar and hydrogen peroxide

5% vinegar cleans mink very well from dirt and restores its original shine. If you need to tidy up a white fur coat, then replace the vinegar with hydrogen peroxide.

Petrol

Aviation gasoline or lighter gasoline is used to clean the collar, as it gets dirty faster than other areas of clothing. Traces of perfume, creams, and lipstick often remain on the collar, which are very difficult to remove. Gasoline is mixed with burnt magnesia, which can be purchased at a pharmacy, to a mushy mass. Apply the paste to the contaminated area and rub against the lint. After drying, comb the fur thoroughly and wipe with 5% vinegar.

You cannot clean light fur with gasoline, otherwise it will turn yellow!

Ammonia+salt

Dilute a tablespoon in a glass of warm water until completely dissolved. table salt, add half a teaspoon of ammonia. Soak a soft cloth or gauze in the mixture and use pressure to clean the fur coat.

Alcohol or vodka

In the following way, the fur coat is cleaned from dirt and dust; in addition, after treatment with alcohol, the former shine returns. Add 5-6 drops of alcohol and 1 drop of cleaning product to half a glass of hot water. Mix the mixture thoroughly, then use a cotton swab dipped in it to clean the fur coat in the direction of the pile.

Dry cleaning

This is a more gentle cleaning method, suitable for removing shallow dirt.

Starch

Place the fur coat on a smooth, flat surface, for example, on a table. Then sprinkle with potato starch and thoroughly rub the surface of the fur coat with it. If the starch becomes dark, repeat the procedure. After treatment, shake off the fur coat well.

Talc or tooth powder

Tooth powder, talcum powder, or regular baby powder are excellent products for cleaning mink fur at home. Clean with tooth powder in the same way as with starch.

Sawdust

The pet store sells sawdust from hardwood trees. A small amount of them needs to be mixed with regular clean gasoline. Apply the mixture to the fur, rub it with your hands, then shake it off, comb the fur and treat it with vinegar.

Semolina

Semolina is used to clean a fur coat in the same way as starch, but there is another cleaning method. Boil a tablespoon of semolina in a glass of milk. Apply the cooled porridge to the fur coat in a thin and even layer and leave for 6 hours. After this, it is good to clean the fur coat of semolina, comb it and dry it at room temperature.

Hot sand

Heat fine, well-sifted sand and then pour it onto the fur. Rub with your hands, remembering to replace dirty sand with clean sand. Repeat the procedure until the fur coat is clean.

How to clean a mink coat: video

See with your own eyes several simple ways You can clean a mink coat suitable for home use by watching the video:

Fur care specialists will clearly explain and show you how to clean a fur coat without resorting to dry cleaning. Also, by watching this video, you can learn how to check a fur product for contamination.

How to clean vomit from a mink coat

If it so happens that your fur coat is stained with vomit, there is no need to despair; you can clean your fur coat in three stages:

• Clean the stain by hand or with a dry brush. Then sprinkle with starch and rub thoroughly.
• After removing the starch, clean the stain with soapy water.
• Dry the fur coat, remove any remaining starch and soap particles with a clean cloth. Comb the fur coat.

How to restore shine to fur

Unfortunately, having lost its shine, a mink product also loses its presentable appearance. In addition to cleaning from dirt, it is sometimes necessary to carry out procedures that will return the original shine to the fur coat. You can refresh your fur coat by wiping the fur with the following products:

• Chopped walnut kernels;
• Glycerol;
• Vinegar;
• Petrol;
• Starch;
• Hydrogen peroxide (for light fur coats).

After treating with one of these substances, comb the pile and dry it.

How to clean stains from a mink coat and hem

Hem long fur coat- a very vulnerable place, since there is always a risk of getting it dirty, for example, when getting into a car. In addition to gasoline, alcohol and ammonia, you can remove stains from the hem in the following ways:

• Wash the potato peelings, grind through a meat grinder, add a few drops of ammonia. Apply the resulting mixture to the fur and wipe with a brush.
• Boil rye or wheat bran. Spread the resulting mixture over the stain in an even layer and rub thoroughly. Repeat if necessary.

How to get rid of dusty, unpleasant odor and restore freshness to fur

Fur is able to absorb and retain many aromas for a long time. Imagine, your fur coat absorbs the smells of food, perfume, cigarettes, and public transport every day. When these odors are mixed, the result is an unpleasant, persistent composition. You can get rid of unpleasant odors in the following ways:

• Regularly clean the product from dirt and dust.
• In winter, take the fur coat out onto the balcony and leave it in the cold for a couple of days. All unpleasant odors will freeze out. If it is not possible to freeze the product outside, then carefully fold it and place it in the freezer.
• In summer, dry the fur coat several times in a cool, dry place without getting in contact with sun rays. Store your fur coat on wide hangers so that it does not come into contact with other items of clothing. Instead of a polyethylene cover, a fabric one is used. Place bags of coffee beans in your pockets. But remember that coffee masks odors and does not remove them, so your fur coat must be perfectly clean!
• Vinegar, gasoline, alcohol, and ammonia remove odors.
• Starch, semolina, and flour absorb all the odors.

How to clean a white fur coat

White fur looks very chic, but the attitude towards it should be careful and delicate. Any dirt immediately becomes noticeable on a white coat, so you have to clean it more often than a dark coat. In addition, white fur can turn yellow over time, causing appearance the fur coat immediately becomes dull. There are several simple but effective ways cleaning white fur:

• Sawdust is mixed with gasoline or alcohol. The mixture is applied to the fur, rubbed thoroughly, and then removed. The fur coat needs to be combed and aired.
• Bulk substances: semolina, starch, talc, tooth powder, flour. One of these products is used to rub the fur. The degree of purity is visible by the color of the product.
• Hydrogen peroxide is poured into a spray bottle, then sprayed over the surface of the fur. Hydrogen peroxide is also mixed with one of the bulk products and a monotonous paste is obtained, which is used to clean fur coats.

After cleaning with semolina, starch or flour, you must shake off the fur coat very carefully so that particles of the product do not remain between the fibers. Otherwise, when wet, they will swell and the quality of the fur coat will deteriorate.

How to clean the lining

Like a fur coat, the lining also gets dirty and needs to be cleaned. The first option is to clean the lining together with the fur coat, and then dry it thoroughly.

The second option is to tear off the lining and wash it in warm soapy water by hand or in a washing machine using delicate mode, remove existing stains with ammonia. The lining is dried naturally, ironed and sewn into place with neat, invisible seams. When the lining wears out, you can easily replace it in a workshop or yourself if you have sewing skills.

Review of professional products for caring for natural fur

When people purchase a fur product, it is assumed that it will be worn for more than one year. Therefore, it is advisable to buy and professional products for the care of fur products. Products from the manufacturer “BIOFUR” are very popular.

Fur products never lose their relevance. Careful attitude and regular proper care will help you look fashionable and chic in your favorite mink coat.

Methods for cleaning fur coats at home.

After a long winter, fur items are placed in a closet for a long time, where they will hang until the next season. That is why after wearing, before hanging your favorite item for storage, it is worth cleaning it. We will tell you how to do this further.

There are many ways to clean fur products. Of course, the easiest option is to take your fur coat to the dry cleaner. But this is quite expensive and this way you can ruin the product.

Methods for cleaning fur:

• Lemon juice. To do this, dilute lemon juice with water in a bowl in a ratio of 1:10. After this, the product is wiped with a sponge soaked in the solution. After this, the product is dried and the fur is combed out.
• Knocking out. This is a method that will help remove dust. To do this, the product is wrapped in a white sheet with the pile down and knocked out.
• Starch. Starch is applied to the product. After the fur coat hangs for a day, the flour is combed out. Immediately in the direction of hair growth, and then against it.

Nowadays, fur cleaner can be purchased at any household chemical store. These are basically sprays that are very convenient to apply to the fur. After this, the product is applied and left for a few minutes to absorb. Next, the fur is combed out. Basically, such products contain essential oils and animal fats. They restore shine and make products beautiful.

Review of fur cleaning products:

• INSAF. One of the most popular remedies. It prevents the appearance of tangles and the undercoat becoming tangled. Quickly copes with grease and fat.
• LIVAL LICKER KONZ. Allows you to quickly put your fur coat in order. There are substances with a tinting effect. Contains plant essential oils that add shine.
• FUR FRESH SALAMANDER. A popular product that can be used to restore shine to a product and get rid of tangles. Tints the pile.
• TERRE DE SOMMIERES POWDER. This substance is best used for targeted cleaning. This is a powder that will help get rid of stains. It is rubbed into the fur and then shaken off.
• ULTRA FINISH MILK. The substance is intended for cleaning fur products of any color. Returns shine and prevents fibers from sticking together.

How to clean a mink coat after winter with alcohol or champagne vodka?

This product is more suitable for cleaning dark fur items. The procedure is quite simple. It is necessary to mix vinegar, vodka and water in equal quantities. After this, a towel or soft brush is soaked in liquid and applied to the product in the direction of hair growth. Next, the product is dried and combed again. This allows you to remove excess fat and add shine to the product.

Cleaning a mink coat with talcum powder to prevent vomiting

Talc is an excellent fur cleaner. Its action is based on adsorption abilities. This substance is ideal for removing grease and adding shine.

Instructions:

• Remove vomit with a damp cloth
• Lay the product on the floor and sprinkle dirty and greasy areas with talcum powder
• Rub the powder clockwise, shake off the talc little by little
• After this, add a new portion and rub again
• Rinse out the talc and shake the product well.

Cleaning a mink coat with ammonia from milk

There are two ways to clean products with ammonia:

• Alcohol and ammonia. Substances are mixed in equal quantities. The resulting liquid is moistened with a sponge and applied to the fur. Next, the product is dried and combed.
• Ammonia, salt and water. It is necessary to add 40 ml of ammonia and 20 g of salt to 500 ml of water. After this, the mixture is shaken and applied to the fur. After this, the product is dried and combed.

This is one of the simplest and most affordable options.

Instructions:

• Add a spoonful of shampoo to warm water and whisk until foam forms.
• Apply a little foam to the sponge and rub into the fur in a circular motion.
• Hang the product on a hanger and wipe with a damp cloth
• Let dry and brush the product with a brush

Cleaning a mink coat with hydrogen peroxide

This option is more suitable for cleaning white fur coats, as light spots may appear on dark fur. You can learn more about cleaning with peroxide in the video.

VIDEO: Cleaning a fur coat with hydrogen peroxide

Cleaning a mink coat with gasoline vinegar

The product is suitable for cleaning dark and light fur.

Instructions:

• Apply vinegar to the swab and wipe the product in the direction of lint growth.
• Hang on a hanger and let dry
• After this, the cotton wool is soaked in glycerin and the entire pile is also wiped
• Hang the product on the balcony and let it air out
• Comb with a comb

Using semolina will not only remove dirt, but also give the product shine. To clean the fur, sprinkle it with grain. After this, you need to rub the product a little, as during washing. After this, carefully shake off the fur and comb it with a soft brush.

Is it possible and how to clean a mink coat with flour?

You can watch the video on how to clean a mink coat with flour.

VIDEO: Cleaning a fur coat with flour

The main task of caring for a mink coat is to give it shine. To do this, you can use a mixture of lard, water and ammonia.

Instructions:

• Dissolve 100 g of rendered pork fat in a liter of boiling water.
• Add 2 ml of ammonia and shake the mixture
• Pour it into a spray bottle and shake the bottle several times
• Apply the solution to the entire fur coat and hang the product on the balcony
• Let the product dry and comb it

One of the most the best ways Cleaning white fur coats is hydrogen peroxide or sawdust with gasoline.

Instructions:

• Pour purified gasoline over the sawdust and squeeze it out
• Lay the fur coat on the table and sprinkle it with wet sawdust
• Leave until the sawdust is completely dry, shake off the product
• Carefully remove any remaining cleaning product with a brush.

How and with what to clean a sheared mink coat?

Cleaning a sheared mink is quite simple. More details in the video.

VIDEO: Cleaning a sheared mink

How to clean or wash the lining of a mink coat to remove dirt?

If there is little dirt, then the product is dried, and then the dry dirt is cleaned with a brush.

There are two options for cleaning the lining:

• Rip off the lining. After this, the lining is machine washed on a delicate cycle. After drying, the fabric is ironed and sewn back onto the fur coat.
• No steaming. In this case, there is no need to steam the lining. Prepare a soap solution and apply it to the lining. Try not to let the inner layer of the fur coat become wet. After this, rinse everything off with a damp cloth and pat dry with a clean, white towel. Hang on hangers and let dry.

There are many rules for caring for a mink coat.

What not to do:

• Wash a fur coat by completely immersing it in water
• Dry near radiators or fireplaces
• Use an iron or hair dryer to dry
• Light fur coats should not be cleaned with tea leaves
• Dark fur should not be cleaned with hydrogen peroxide.

As you can see, cleaning a fur coat made from natural fur is quite simple. All it takes is a little time and patience.

VIDEO: Cleaning a fur coat at home