How to crochet a simple napkin: diagrams and photos of work for beginners. Crochet napkin patterns for beginners with description Easy crocheted openwork napkins

Craftswomen prefer to begin their crochet training by implementing simple napkin patterns. Unfortunately, in the future, such ideas do not find application at home - well, so be it, but a napkin made with love can be an excellent gift for a person who will be delighted with the tenderness. In the article about crocheting, napkins are presented in abundance. There are not only ready-made diagrams here, but also instructions on how to put together this divine beauty using your own imagination.

Simple napkins for beginners

It is necessary to take care of those new to this craft and offer simpler options for napkins. Better than any description, diagrams will follow - this visual aid will help you deal with the most difficult task.

A selection of simple napkins with descriptions and diagrams:

Napkin "Poppies"

Now you can complicate the task and knit a product that seems complex at first glance, but is simple to perform. This is the “Poppies” napkin shown in the photo. One should not complain about the difficulty of combining colors - the entire napkin is presented in the form of a round cloth, where white and green thread are used, while poppies are knitted separately and simply sewn on with thread using a needle. Experienced craftswomen make crochet joins, which will also be easy for beginners to do in the future.

So, to begin with, according to the pattern, a white circle is knitted.

Subsequently, the white thread is changed to green and knitting continues until the end.

The diagram for poppies is presented by hand. The first row is knitted with yellow thread, the second row is knitted with black thread - this is the core of the flower. Next, the knitting of the petals begins, so from the third row the thread is changed with a red tint. Knit each petal separately - in total you will need 5 petals and 6 flowers per napkin.

Napkins with swans are very attractive and will decorate any work - it is important not to be afraid to combine the birds with the canvas and position them correctly. The diagram shows tying birds.

The first pattern is represented by a base in the form of a cup - first knit an oval, and then carefully “arrange” the wings of the bird. The thread can be torn off or you can continue knitting the neck as a single piece. The neck appears in the form of a tube, which gradually becomes smaller. The last two rows are knitted with red or orange thread - this is the beak.

The second diagram represents a different knitting of swans: the wings of a bird are a part with four petals. In the future, the neck knitting is also formed here in a similar way.


Napkin “Sunflower”

This napkin option is also suitable for beginners. There is no need to look for a special description here - just use a similar pattern and two shades of thread - black and yellow. For example, the following patterns for knitting a sunflower are given.


Napkins with bumps

The photo shows an original napkin with cones, but it may be difficult to find the pattern. The fact is that there are practically no special patterns for knitting such products. But experienced craftswomen create a masterpiece using a standard - to knit napkins, you need to take the usual options with the presence of “pineapples”. Instead of pineapples, cones are knitted. The main thing is to choose schemes with suitable density. Although the fantasies of craftswomen are limitless, therefore there are no rules to follow in crocheting.

A selection of patterns with pineapples, replaced with cones.



Combined napkins

With the help of simple imagination and a few shades of thread, you can create a real embodiment of art. For napkins, it is enough to collect several motifs crocheted separately. This may seem difficult to some, but experienced craftswomen resort to just this method of knitting for napkins with flowers.

A selection of combined napkins.




A selection of schemes for combination.


Schemes for independent work

Now you should present some patterns for knitting yourself - this will allow you to show your imagination in terms of skill and experience. Use different threads, sew on individually knitted flowers - enjoy knitting and the embodiment of beauty. Only your hands can create such grace, and your eyes and the admiring glances of your loved ones will appreciate the work.






Crochet napkins can be a great addition to your existing interior. They are often used to create large products - tablecloths and even curtains. All you have to do is not be lazy and choose the right threads. By the way, cotton threads are selected for napkins - they hold the fabric in a given shape. If necessary, napkins are starched - this way they take on the appearance of a full-fledged product.

To bring coziness to your home, sometimes it’s enough to change some detail - rearrange it, hang new curtains or, for example, crochet small napkins. Even small openwork napkins can diversify and enliven the interior, become an independent decoration or part of a large tablecloth on the table. Knitted napkins of various shapes, patterns and colors perfectly diversify the dining table or buffet table.

Airy lace in the interior

Even the simplest openwork napkin can become the highlight of the interior. Simple lace, similar to a snowflake, looks weightless and almost fabulous. Knitting such napkins usually does not require special skills or complex techniques. Having at your disposal air loops, double crochets and single crochets, you can create real masterpieces.

One of the options for lace napkins is shown in the following video:

You will no longer see knitted napkins in a modern interior. Their time seems to have passed, and now decorating a house in this way is not fashionable. In fact, lace can become an exquisite addition to such typical mass-market items as sofa cushions, curtains, clothing and accessories.


Basics of knitting products

There is no shortage of beautiful and simple patterns - any needlewoman will definitely find motifs to suit her taste. This article provides diagrams of simple patterned napkins that are accessible even to a beginning craftswoman.

This little napkin is crocheted using just chain stitches and double crochets, and even just looking at the pattern it looks pretty simple. The knitting is dense, so if you choose a strong, smooth thread, you can knit a set of cup coasters using this pattern.

Knitting begins with a chain of chain stitches connected by a ring; to reach the next row, three chain stitches are always made, and the pattern is made up of double crochets. When working with such a monotonous pattern, it is very important to keep track of which stitch each subsequent double crochet rests on, since this is what determines the napkin pattern.

Leaf pattern

In more detail, you can consider a slightly more complex diagram of a small napkin with a description of the knitting process:

To work, you will need thin cotton yarn and a hook No. 1.25 or 1.75. The napkin looks voluminous, but consists of only twelve rows.

Knitting starts from the center from a chain of eight air loops that must be closed in a circle. Rise to the next row with three chain stitches that work the same part of the pattern as the double crochets on the second row. Between each column up to and including the fifth row there are two air loops.

The pattern of this napkin is made up of air loops, double crochets and single crochets, as well as triple unfinished double crochets from one loop. To knit such combined stitches, you must first make several double crochets, and at the same time leave one loop from each. For this pattern, all three stitches are knitted from one loop, but there is another option where they are knitted from different loops, as in the figure below:

After the stitches are cast on, the working thread is pulled through all the loops on the hook:

Thus, the columns are combined into one.

Thin cobweb

Another interesting example of a small napkin with a simple pattern is a cobweb.

This napkin consists of eleven rows; only chain stitches and double crochets are used in knitting.

This napkin, despite its simplicity, looks very airy and light, while giving the impression of complex work. The subtlety here is that long chains of chain stitches on the outer row of the napkin will not hold their shape. Such work must be starched and ironed, giving it the desired appearance.

Final finishing

In order for the finished napkin to retain its shape and look complete, another stage of work on the knitted product is necessary - starching. For these purposes, in addition to starch and gelatin, sugar and PVA glue can also be used.

It’s easy to prepare a starch solution: you just need to boil 1 liter of water. In cold water, the required amount of starch is diluted separately (from one to three tablespoons, depending on the desired end result). Then, the starch well mixed in water is poured into hot water.

The solution must be constantly stirred to avoid the formation of lumps. The finished paste should be homogeneous and transparent.


After the paste has cooled a little, you can immerse washed and bleached napkins in it. Products soaked in starch are wrung out and laid out on a flat surface - at this point you can give the napkin the intended shape.

Using this pattern, you get a small round crocheted napkin with a diameter of 6-7 cm. Such an openwork detail will perfectly decorate your table as a glass holder, and by knitting a whole pack of napkins, you can put them together into an interesting interior composition, decorating a window or walls in the house with it. You can create coziness with your own hands, which is doubly pleasant.

This is what a napkin looks like, knitted according to the pattern shown. Below is a detailed description of how to knit.

The first dc at the beginning of each row is replaced by 3 ch, and at the end of the row a connecting stitch must be made in the 3rd chain loop from the three cast on at the beginning.

Knitting begins with an amigurumi ring or a chain of 6-8 ch secured into a ring. After this, dial into the ring 12 times (1 dc + 1 ch).

The second row is knitted in chain loops (2 dc + 1 ch), repeat 12 times.

Third row of napkin crochet - (3 dc + 1 ch) x 12 times, knit in air loops.

Fourth row - (4 dc + 1 ch) x 12 times in chain loops of the previous row of knitted napkin.

We alternate the fifth row (5 ch, connecting stitch) 24 times, making a ss in the middle between the four double crochets of the previous row and into the air loops. The last arch is knitted as 2 ch and dc at the base of the first arch of the row.

Sixth row - alternate between the arches in one 8 dc, in the second - a connecting loop. And so on until the end of the row.

Fasten the thread, break it and hide it. Wash the napkin and starch it so that it keeps its shape.

Crochet small round napkin

Crocheted napkins are an integral part of everyday life in your beloved home, where it is always cozy and warm. You can give such associations to your loved ones by learning how to crochet napkins. They can be connected both according to classical motives and in a modern way, in the most unusual ways. They can be of any fancy shapes and patterns - from delicate delicate lace details, to strict minimalism of lines and interweaving of threads.

Both experienced needlewomen and beginner knitters are working on crocheted napkins with interest. Patterns for crocheting napkins will interest all housewives without exception, and the finished product will not leave anyone close to you indifferent. Remember that crocheted napkins are not only a beautiful decoration, but also an original gift for a long memory.

Beautiful crochet napkins - patterns with descriptions

Let's begin to study the options for crocheting these airy products, the main property of which is to keep the home cozy. And diagrams and detailed descriptions of the progress of work will greatly facilitate this task for us.

It should be noted right away that beginners should not be intimidated by complex diagrams and descriptions. Crocheting napkins for beginners is quite accessible, the main thing is that in order to learn faster, you need to choose several simple knitting options to start with. Let's start with simple examples of crochet, after which we will look at more complex, but certainly interesting options for knitting napkins.

Simple

Where to start crocheting napkins is with simple weaves, loops and rings, which will help you quickly get the hang of it and move on to more complex and interesting patterns for knitting these lovely products.

Floral motif

Popular articles:


When it comes to knitting for beginners, a simple crochet doily with a floral motif is always a good idea. The diameter of our future napkin is 15 cm. It is suitable as a decoration for any part of the house.

Yarn — YarnArt Jeans of a suitable color -12 g, 50 g - 160 m;
Hook — №2.

StBN – single crochet;
StSN – double crochet;
SSt – connecting column;
VP - air loop;
PStSN - half double crochet.


We collect a chain of 8P. We connect them into a ring and step by step follow the further work scheme.
1st row: 1 VP, 16 StBN, SSt;

2nd row: At the beginning of knitting, we replace the stitches with the corresponding number of VPs. *1PStSN, 5VP* x 8;

3rd row: knitting under arches from 5 VP. sst * 5 stsn, 2 VP * x 8, sst;

4th row: in the next five columns of the previous row we knit like this: * 2 Sts, 3 Sts, 2 Sts, 2 VP * x 8, St;

5 row: skipping the 2nd and 6th stitch, we knit 5 dc with one base, 3 ch, under 2 ch – 1 dc, 2 ch, 1 dc* x 8* dc;

6th row: under all the arches from VP we knit *1 StS, 2 VP, 1 StS, 3 VP* SSt;

7th row: we start by knitting a DC under the arch and knit *1 DC, 3 VP, 1 DC, 3 VP*, skip one arch and repeat knitting from * to *. We finish the row - 1 VP, 1 PstSN;

8th row: *1 stbn under the arch, 5 stsn under the next one*, st.

We cut the thread and fasten it.

Sunny lace


Our napkin is perfect for vases, cups or glasses. Its diameter will be 12.5 cm.

Preparing to knit a napkin:

Yarn — Narcissus (100g – 395m, 100% mercerized cotton);
Hook — №2.

Abbreviations for the diagram:

CCH – single crochet stitch;
VP - air loop;
JV – connecting loop;
Pico – 3 VPs connected by a joint venture into the first loop;
RLS - single crochet.

Knitting pattern and description of how to crochet a napkin:


8VP, SP.

1st row: 3VP, knit 15 DC in a circle, SP in 3rd VP;

2nd row: 5VP, *1DC in the DC of the previous row (PR), 2VP*, SP in the 3rd VP;

3rd row: We knit 1 SP in the 4th VP, 3 VP and 3 SSN with one common vertex - in the PR arch, 4 VP, * 4 SSN with a common vertex in the PR arch, 4 VP *, SP in the 3rd VP;

4th row: 1VP, in the common top 1СБН, *in the arch of the previous row 5СН, 1СБН in the common top*, SP in the SC;

5 row: 3VP, *3VP, 1SC in the 3rd SC of the previous row, 3VP, 1DC in the SC of the previous row*, SP in the 3rd VP;

6th row: 2SP in 4-5VP, *1SC in arch, 5VP*, SP in SC;

7th row: 4SP, *1sc in arch, 5VP*, sp in sc;

8th row: 4SP, *1SC in the arch, 3VP, in the arch (2DC, pico, 2DC), 3VP*, SP in the SC.

Oval

Oval napkins are associated with the comfort and warmth of grandma's house. There were always a few crocheted napkins in an elongated oval shape, which were lovingly passed down from generation to generation. The time has come for us to learn how to knit such family heirlooms.

Napkin “Nostalgia”


An oval crocheted napkin with diagrams and descriptions will help you knit an excellent gift for loved ones with your own hands, who will definitely remember with nostalgia something pleasant from the past. After all, such napkins are associated with warmth and comfort.

The size of our napkin is 24×46.

Preparing to knit a napkin:

Yarn — Cotton white (50 g – 208 m, 100% mercerized cotton);
Hook — № 1,5 — 1,75.

Knitting pattern and description of how to crochet a napkin:


For the socket, tie a chain of 8 chain stitches and close it with 1 dc into a ring. Next, knit in circular rows according to the pattern. Tie 4 rosettes, connecting them together in the last row. Attach the thread at the arrow in knit around the rosettes in circular rows according to the pattern.


Napkin “Lacy Waltz”


Another classic style crocheted oval napkin.

Preparing to knit a napkin:

Yarn — Iris threads in pink and blue (100% cotton, 25 g/150 m); white yarn (40% cotton, 60% viscose, 100g/400m);
Hook — № 1,15.

Knitting pattern and description of how to crochet a napkin:


Step 1: Cast on 45 chain stitches, then single crochet in the 10th loop of the chain and then crochet 5 ch and dc in the 6th loop of the chain, according to the diagram (photo 1).

Step 2: Having knitted a connecting stitch at the end of the 1st row, start knitting a single crochet, a half double crochet, 3 double crochets, a half double crochet, a single crochet into each arch. Between these elements knit 2 VP. Having tied the lower side, knit a ring of 8 VPs, continue tying the upper part. At the end of this row, knit 4 VPs and a double crochet stitch in the VP of the first row. You will get a ring, just like the other end (photo 2).

Step 3: In the third row, knit arches of 5 or 6 VPs according to the pattern (photo 3).

Step 4: Then knit 2 rows of arches and picots from 3 VPs (photos 4 and 5).

Step 5: In the 6th row, alternate chains of 5 VPs and single crochets in the middle of the arches of the previous row (photo 6).

Step 6: Knit 5 double crochets into each arch, separating from VP (photo 7).

Step 8: Work another row of double crochets, separated by VP (photo 9).


Step 9: Then follow 3 rows of 7 VP (photo 1).

Step 10: Let's start knitting with pink thread. In the diagram, the beginning of this row is indicated by a pink triangle. We knit an arch from 7 VP, then dc and turn the work (photo 2).

Step 11: Place 14 double stitches into this arch in the opposite direction (photo 3).

Step 12: Let's turn the work around again. We knit 3 VP rises, * 2 VP, senior s/n*, repeat from * to * 7 times. Continue knitting according to the pattern (photo 4).

Step 13: When you knit the next such element, instead of 3 VP rises, knit 3 connecting stitches, turn the work, and continue crocheting the napkin according to the pattern (photo 5).

Step 14: Finishing this row, tie 4 VP and connect. column (photo 6).

Step 15: Now knit with blue thread in accordance with the pattern (photo 7).

Step 16: Increase the number of VPs between double crochets (photo 8).

Step 17: In the last row, knit 3 VPs, 3 double crochets with a common top, a picot of 5 VPs, 3 VPs into each arch (photo 9).


Round

Round napkins are the most popular type among all possible crocheted napkins. The variety of designs and patterns impresses both beginners and experienced craftswomen. Let's consider several options for knitting patterns with descriptions.

Napkin “Winter's Tale”


The diameter of the future round napkin will be 20 cm.

Preparing to knit a napkin:

Yarn — Narcissus (100% mercerized cotton, 100 g – 395 m);
Hook — №2.

Abbreviations for the diagram:

JV – connecting loop;
VP - air loop;
CCH – single crochet stitch;
RLS – single crochet;
[…] , *…* - repetition;
ETC – previous row;
A – common vertex, i.e. 2 dc are knitted together;
Pico – 4VP and 1СБН in the first VP.

Knitting pattern and description of how to crochet a napkin:


8VP, SP.

1st row: 5VP, *1DC, 2VP*, SP in the 3rd VP; Starting from the second row - at the beginning of each row we knit 3VP.

2nd row: to the beginning of the row another 2DC, *3VP, 3DC in 1DC PR*, SP in the 3rd VP;

3rd row: 2Dc in each Dc PR, *4VP, 5Dc (2Dc in the outermost Dc and 1Dc in the middle)*, SP in the 3rd VP;

4th row: 6dc (2 dc in each dc in the outer dc in the middle and 1 dc in the middle), * 4 ch, 7 dc (according to the same pattern as in the 3rd row - adding 1 dc for each free dc in the middle) *, sp in the 3rd ch ;

5 row: 8DC (according to the 4th row pattern), *5VP, 9DC (according to the 4th row pattern), SP in the 3rd VP;

6th row: 10СН, *6VP, 11СН*, SP in the 3rd VP + 1SP;

7th row: 8DC (leaving 1DC PR free at the end), *8VP, 9DC (leaving 1DC free on both sides) – we form a rhombus, SP in the 3rd VP + 1SP;

8th row: 6SSN, *13VP, 7SSN*, SP in the 3rd VP + 1SP;

9th row: 4СН, *6ВП, (1СБН, 6ВП, 1СБН) – in the middle of the arch, 6VP, 5СН*, SP in the 3rd VP + 1SP;

10th row: 2СН, *6ВП, in a small arch 6СНБ, 6ВП, 3СН*, SP in the 3rd VP + 1SP;

11th row: 1СН, , joint venture in the 3rd VP;

Row 12: 4VP, pico, SP in the 3rd VP.

Napkin “Tenderness”


A more complex version of the round napkin, but the end result will definitely please you. The finished crochet product will be 36 cm.

Preparing to knit a napkin:

Yarn — Pekhorka “Successful” blue, 100% mercerized cotton (50 g -220 m);

Hook — №2.

Abbreviations for the diagram:

StbSN – double crochet;
VP - air loop;
Pet - a loop.

Knitting pattern and description of how to crochet a napkin:


We collect eight VPs and close them in a circle.
Each next row, we begin by knitting 3 VP, which replaces 1 StbSN.
We end each row with a connecting column.

1st row: *2 StbSN, 2 VP* - repeat 8 times;

2nd row: *in each DC of the previous row we knit 2 DC, 2 VP* - repeat 8 times;

3rd row: *2 DC in one stitch, 1 DC in each of the next two loops, 2 DC in one stitch, 2 VP*, repeat until the end of the row;

4th row: *2 DC in one stitch, 1 DC in each of the next four loops, 2 DC in one stitch, 2 VP*, repeat until the end of the row;

5 row: *2 DC in one stitch, 1 DC in the next six stitches, 2 DC in one stitch, 2 VP*, repeat until the end of the row;

6th row: *2 DC in one stitch, 1 DC in each of the next eight loops, 2 DC in one stitch, 2 VP*, repeat until the end of the row;

7th row: *2 DC in one stitch, 1 DC in the next ten stitches, 2 DC in one stitch, 2 VP*, repeat until the end of the row;

From 8 to 22 row knit according to the pattern.

Square

Not a very popular form for crocheted napkins, but also interesting, both visually and in work. Needlewomen can try out several knitting options using the following patterns with descriptions.

Napkin “Pineapple Fantasy”


Preparing to knit a napkin:

Yarn — white YarnArt Jeans, 55% cotton, 45% acrylic (50 g – 160 m);

Hook — №2.

Abbreviations for the diagram:

CCH – double crochet;
RLS – single crochet;
VP - air loop;
С3Н - double crochet stitch;
JV – connecting loop.

Knitting pattern and description of how to crochet a napkin:


Important: when further knitting, do not forget to replace the lifting 3 VPs with 1 SSN. Knit according to the description, but look at the diagram so that all the points in knitting are clear.

1st row: we start with a sliding loop and inside the ring we knit 3 VP, 1 Dc, 5 VP, * 2 Dc with a common top (cluster), 5 VP; repeat six more times. At the end of the row, instead of five VPs, we knit 2 VPs and 1 DC in the initial cluster. The result was eight arches from five VPs;

2nd row: *6 VP, sc under the next arch of five VP; repeat from * to the end of the row, end the row with three VPs and 1 dc in the dc column of the first row;

3rd row: 7 VP (equal to 1 Dc + 4 VP) and in the first arch we knit * 6 Dc, 4 VP, 1 Dc under the next arch, 4 VP; repeat from * to the end of the row. We finish the row of joint ventures in the third VP;

4th row: 4 VP (equal to 1 Dc + 1 VP), 1 Dc in the same loop, 4 VP, above each Dc of the third row we knit 1 Dc and 1 VP between the columns, 4 VP, * (1 Dc, 1 VP, 1 Dc) in DC column of the third row, 4 VP, above each DC of the third row we knit 1 DC and 1 VP between the columns, 4 VP; repeat from * to the end of the row. We finish the row of joint ventures in the third VP;

5 row: *4 VP (hereinafter we knit as 1 Dc + 1 VP), 1 Dc under the VP of the fourth row, 1 VP, 1 Dc in a double crochet, 4 VP, 1 RLS under the first VP of the fourth row (4 VP, 1 RLS under the VP ) – three more times, 4 VP; repeat from * to the end of the row. We finish the joint venture in the third VP;

6th row: *4 VP (hereinafter we knit as 1 Dc + 1 VP), 1 Dc under the first VP, 1 VP, 1 Dc in the CH column, 1 VP, 1 Dc under the VP, 1 VP, 1 Dc in the Dc column, 4 VP, 1 RLS under the first arch, (4 VP, 1 RLS under the arch) – 2 more times, 4 VP; repeat from * to the end of the row. We finish the joint venture in the third VP;

7th row: * 3 VP (in the future we knit as 1 Dc), (1 VP, 1 Dc) - 7 more times, 4 VP, 1 RLS in the first arch, 4 VP, 1 RLS under the arch, 4 VP, 1 RLS under the arch, 4 VP; repeat from * to the end of the row. We finish the joint venture in the third VP;

8th row: * 3 VP (in the future we knit as 1 Dc), (2 VP, 1 Dc) – 7 more times, 4 VP, 1 RLS in the first arch, 4 VP, 1 RLS under the arch, 4 VP; repeat from * to the end of the row. We finish the joint venture in the third VP;

9th row: * 3 VP (in the future we knit as 1 SSN), (3 VP, 1 SSN) – 7 more times, 4 VP, 1 RLS in the 1st arch, 4 VP; repeat from * to the end of the row. We finish the joint venture in the third VP;

10th row: 5 VP (hereinafter we knit as 1 C3H), * (1 VP, 1 Dc in a CH column, 1 VP, 2 Dc under the arch, 1 VP) – 7 more times, 1 Dc, 1 VP, 2 C3H with a common top ( see diagram); repeat from * to the end of the row. We finish 1 C3H and SP in the fifth VP;

11th row: we will knit into each column the DC of the tenth row.* 4 VP (in the future we will knit as 1 DC + 1 VP), 1 DC, picot of three VP, 1 VP; repeat from * to the end of the row. We finish the joint venture in the third VP.

We cut the thread and thread it. After this, a small square napkin needs to be stretched and steamed with a hot iron, or a wet one should be stretched, secured with pins and allowed to dry.

Napkin “Easter motif”


The napkin, which will look great both as a decoration during the spring holidays and will playfully decorate the nursery, will be 23*20 cm, and with a binding - 26*23 cm. This type of crochet is called fillet knitting.

Preparing to knit a napkin:

Yarn — 36 g of yellow yarn Pekhorka Nezhnaya (50 g - 150 m, 50% acrylic - 50% cotton);

Hook — №2;

Needle - blunt-ended.

Knitting pattern and description of how to crochet a napkin:


In total, we have 23 cells according to the scheme. In order to calculate the required number of VPs for the first chain, you need to multiply 23 by 3 and then add 3 more VPs for the rotation chain. Total 72 loops. And remember that a filled cell is 2 Dc inside the cell, and an empty one is 2 VP. Even rows are read from left to right, and odd rows are read from right to left.

1st row: We start knitting with a 4 chain chain, since the first cell is filled. If the cell needed to be empty, then it would be necessary to add 2 more VPs and knit into the 8th VP. We knit a DC in each loop of the chain to the end of the row. The result should be 70 CCHs, taking into account 3 lifting loops replacing the first CCH (photos 1 and 2).

2nd row: We start with 3 VP lifting, then 2 VP (this is a filled cell) and 1 more VP, then 2 VP, skip two at the base and in the third - 1 VP, and again 2 VP, in the third CV and so on until the last cell according to the scheme , which must be filled in, i.e. at the end of the row you should have 4 dc. The row ends with a DC in the 3rd chain lifting loop. In total, you should have 23 cells in the row, two of which at the edges should be filled, as in the photo below (photo 3,4,5).

3rd row: This is where the drawing begins. Let's focus on the knitting pattern. This odd row is read according to the pattern from right to left. 1 cell is filled, then 8 empty cells, 5 filled (you should get 16 CCHs), 8 empty, 1 filled. The filled cells are knitted under an arch of air loops (photo 6).

4th row: 1 cell – filled (4 CCH), 6 – empty, 2 – filled (7 CCH), 5 – empty, 2 – filled (7 CCH), 6 – empty, 1 – filled (4 CCH). The series is read from left to right. If the gaps in the filled cells are too large, this means that the loops are too loose and you need to replace the hook with a smaller size to make the knitting tighter (photo 7).

Row 18: 1 cell – filled (4 CCH), 1 – empty, 1 – filled (4 CCH), 2 – empty, 4 filled (13 CCH), 2 – empty, 2 – filled (7 CCH), 1 – empty, 4 – filled (13 dc), 2 – empty, 1 – filled (4 dc), 1 – empty, 1 – filled (4 dc). The series is read from left to right. In order to easily check whether you have missed a DC in a row, count the number of filled cells in a row, then multiply by 3 and add 1. For example, you have 10 filled cells in a row, this means that you need to knit: 10 cells * 3 DC + 1 DC = 34 dc. Accordingly, 10 filled cells are equal to the 34th CCH (photo 8).

Row 29: These are only empty cells, except for the first and last, which are the frame of our knitted chicken.

Row 30: The whole thing consists of their SSN. There should be 70 of them (photo 9).


Crochet napkin crocheting pattern and description:


We turn the work to face us and immediately knit 1 dc in the 4th loop from the beginning, without adding lifting loops.

Having knitted the first dc, we make a picot from 3 chain stitches, fasten it with a connecting post into the first chain stitch.

Now we also fasten it into the fourth loop with a connecting post. And again in the 4th loop we knit 6 dcs with a picot.

Along the side, the fasteners and the decoration itself are attached every 2 rows into a side loop.

Tighten the loop and hide the thread using a needle with a blunt end in the knitting. Next we wash, iron and steam. After washing, all the loops will settle down, and will finally align after ironing.

Japanese

Crocheting napkins in the Japanese style is not suitable for beginner knitters, because an important part of the work lies in the complexity of the lines, loops and rings, woven into a special pattern that turns into an extraordinary floral motif. The Japanese crochet napkin is the pinnacle of knitting, which allows you to make very unusual napkins, interesting and original.

Napkin “Cherry Orchard”


This napkin is made up of several individual motifs.

Preparing to knit a napkin:

Yarn — White and pink iris;

Hook — №1;

Abbreviations for the diagram:

VP - air loop

PS - half-column (connecting column)

RLS - single crochet

S1H - single crochet

S2H - double crochet stitch

С3Н - double crochet stitch

Description of working on a crocheted napkin with photographs:


We begin knitting the motif with white yarn. We close the chain of 14 VPs into a ring with a half-column.

1st row: 3VP and 27 C1H in a ring (photo 1).

2nd row: 4VP, *С1Н, 1ВП *, С1Н – a total of 13 stitches, knitted under each loop of the 1st row.
At the end of the row, cast on 3 chain stitches and pull out a long loop so that the knitting does not unravel (photo 2).

Now we take pink yarn. We cast on 14 VP, insert the resulting chain under the white ring, close it into the ring with a half-column and knit 2 rows in the same way as with white yarn (photo 3).

3rd row: above each VP of the last row of the white ring we knit C1H, and between them - 1VP, picot from 3VP, 1VP. At the end of the row, pull out a long loop and leave knitting (photo 5).

We return to the white ring, connect it with the pink one and knit the 3rd row in the same way.

The last loop of the white ring is connected to the pink one, and the pink one to the white one.

We cut off the excess threads and carefully hide them on the wrong side, crocheting them through the loops between the rows. The result was 25 motifs, sewn together with a needle and thread (photo 6).

Napkin “Japanese motif”


Preparing to knit a napkin:

Yarn — white yarn Madame Tricote Maxi (mercerized cotton, in a skein of 100 g by 565 m);

Hook — №1;

Scheme and description of working on a crocheted napkin with photographs:


In this Japanese napkin pattern, the even and odd rows are painted in different colors. Despite the fact that there are only 12 rows in the napkin, including the final row of single crochet, the size of the finished product is 33 cm.

1st row: Around the amigurumi ring - ch 1. and 11 tbsp. single crochet; close the row with a connecting loop (photo 1).

2nd row: 16 vp, double crochet stitch in 4 vp. the beginning of this row; a stitch with 4 crochets, knitted together with the previous stitch with 2 crochets; *7 ch, double crochet in the center of the previous 4 double crochet, double crochet, knitted together with a double crochet* - repeat from * to * until the end of the row, ch 7, double crochet 2 yarn overs in the center of the previous stitch with 4 yarn overs, close the row with a connecting stitch in the 9th loop of the beginning of this row (photo 2).


3rd row: 10 ch, double crochet, 9 double crochets, double crochet in 4th ch. the beginning of this row (photo 1). Then make 2 double crochet stitches in the center of the previous 5 crochet stitch (photos 2 and 3).


9 ch, 2 double crochets, knitted together into the 4th ch. the beginning of this row (photo 1). We knit 7 vp, * 7 tbsp. with 4 yarn overs, knitted together (photos 2 and 3).


7 vp, 1 tbsp. with 6 yarn overs and 1 tbsp. with 4 yarn overs in the third yarn over of the previous stitch, knitted together.


9 vp, 1 tbsp. with 5 yarn overs, knitted into the third yarn over of a stitch with 6 yarn overs (photo 1). We knit 2 stitches with 3 yarn overs, knitted in the center of the previous stitch with 5 yarn overs (photos 2 and 3).


9 vp, 2 tbsp. with 4 yarn overs, knitted together, into the third yarn over of the same stitch with 6 yarn overs (photo 1). Then do 7 ch* - repeat from * to * until the end of the row; then - 7 ch. and close the row with a blind loop of 10 vp. the beginning of this row (photo 2).


4th row: Move in half columns to the top of the flower. 5 ch, *2 tbsp. with 3 yarn overs, knitted together, 8 ch, 1 tbsp. with 4 yarn overs, of which knit only 3 and make 2 more stitches with 3 yarn overs at the same point, knit them together, and only then knit the last stitch of the stitch with 4 yarn overs*.


From * to * is a petal. 5 vp, petal, 5 vp, petal, 5 vp, petal. Next, tie 7 ch. (photo 1). The next maneuver is a tower structure designed to pull together 4 arcs from the air loops of the previous row. We knit like this. 1 tbsp. with 3 yarn overs, of which we knit only two (photo 2).


Around the next arc - a double crochet stitch (we don’t close the stitch). Repeat around the next two arcs with double crochets (photo 1). Knit all 4 stitches together and finish the primary stitch with 3 yarn overs (photo 2).


*7 vp, 5 petals separated by 5 vp; 7 vp, “tightening tower” * - repeat until the end of the row. Close the row like this: 5 vp, 1 tbsp. with 1 yarn over in the 5th chain stitch of the beginning of this row (photo). Then knit the 5th row. 3 ch, double crochet into the next arc of ch.


9 ch, *dc with 2 yarn overs, of which we knit only one; double crochet around the next arc, knitted together with the first stitch; knit the remaining double crochet stitch*. From * to * - let there be a structure with the code name “Eiffel Tower”.


Next we knit: * ch 6, Eiffel Tower * - repeat three times from * to *. Next - 7 vp, “constricting tower” - 7 vp, Eiffel Tower, * 6 vp, Eiffel Tower * - repeat from * to * 4 more times. And then again 7 vp, tightening tower, etc. to the end of the row. Close the row with a blind loop according to the diagram.

6th row: 6 ch, 2 tbsp. with 3 yarn overs, knitted together; 7 ch, 3 tbsp. with 3 double crochets in the same Eiffel Tower of the previous row + 3 tbsp. with 3 yarn overs into the next Eiffel Tower of the previous row, knitted together; 7 ch, 3 tbsp. with 3 yarn overs, knitted together, in the same Eiffel Tower of the previous row, 7 ch. and again 3 tbsp. with 3 double crochets + 3 tbsp. with 3 yarn overs into the next Eiffel Tower, knitted together. The last arc from v.p. knitted like this: 5 ch. and 1 tbsp. with 1 double crochet.

The total obtained in each Eiffel tower of the previous row is 3 petals from 3 tbsp. with 3 yarn overs, knitted together, and separated by 7 chain stitches, while at the junction of three-petal bushes, the columns of two adjacent petals are knitted together (photo 1).

7th row: 3 vp, 1 tbsp. with 1 yarn over around the next arc of the previous row, ch 10, “Eiffel Tower”, ch 7. - continue alternating 7 vp. and Eiffel towers to the end of the row. Close the row with a blind loop. Go to the top of the arc from v.p. 4 tbsp. without crochet (photo 2).


8th row: 7 ch, single crochet around the next arc, 7 ch, 1 dc. Single crochet around the next arc (photo 1). Next - 7 vp, 1 tbsp. with 5 yarn overs to the Eiffel Tower (photo 2,3).


1 tbsp. with 3 yarn overs in the center of the column with 5 yarn overs - then knit them together.


6 vp, 1 tbsp. with 5 crochets in the center of the column with 5 crochets. 2 tbsp. with 3 yarn overs in the center of the last stitch with 5 yarn overs, ch 6 (photo 1). 2 tbsp. with 3 crochets, knitted together, in the center of the first stitch with 5 crochets of this complex design (photo 2).


Repeat all steps in the description of this row until the end of the row. Close the row with a blind loop, go 4 tbsp. without crochet to the top of the arc.


9th row: 3 ch, 5 tbsp. with 2 double crochets, knitted together, ch 3, single crochet around the arc. 5 ch, Eiffel Tower (photo 1). 5 v.p. and move on to knitting the petal: a stitch with 4 yarn overs, of which we knit only three, then 2 tbsp. with 3 yarn overs, knitted together with the first; tie a stitch with 4 crochets - the petal is ready. We knit five such petals, separating them with 5 vp. After all the petals - 5 ch, Eiffel Tower, 5 ch, single crochet and repeat all steps from the beginning of this row to the end of the row. Close a row of blind loops. Go to the top of the element filled with 5 tbsp. with 2 double crochets, knitted together, single crochet (photo 2,3).


10th row: Ch 4, single crochet around the next arc, ch 5, single crochet around the next arc, ch 5, single crochet around the next arc, ch 4, single crochet around that same arc, 5 vp, single crochet around the next arc, 4 vp, single crochet around the same arc, 5 vp, single crochet around the next arc, 4 vp, dc single crochet around the same arc, ch 5, single crochet around the next arc, ch 4, single crochet around the same arc, ch 5, single crochet around the next arc, 5 in. p., single crochet around the next arc, 4 ch, single crochet at the top of the diamond of the previous row. Repeat from the beginning of the description to the end of the row, but instead of the last 5 ch. - 2 v.p. + 1 tbsp. with 1 double crochet.


11th row: This row is mainly made up of a lift from the tenth row, and if you master it (the lift), consider that a Japanese napkin is in your pocket. 3 vp, 1 tbsp. with 1 yarn over around the next arc. Next: ch 4, unfold the napkin. Now we knit in the other direction: 1 tbsp. with 3 yarn overs around the next arc, of which we knit only the first, then 1 tbsp. with 1 crochet around the next arc, knit together, finish with a stitch with 3 crochets. We unfold the napkin to its normal state and knit again counterclockwise. 1 tbsp. with 3 yarn overs, of which we knit only one, 1 tbsp. with 1 crochet around the next arc, knit together, finish with a stitch with 3 crochets. It turns out to be an Eiffel Tower, only the top is made up of not one, but two yarn overs. We tie all the arches of the flower with such grown Eiffel towers, separated by five chain stitches (photo 1).

Then we move on to the junction of the flowers. To do this, we knit (according to the diagram): 4 ch, 1 stitch with 4 crochets, of which we knit only one, then a stitch with 1 crochet around the next arc, knit together with the previous stitch and then we knit two more yarn overs from the stitch with 4 yarn overs. Next, a stitch with 3 yarn overs around the next arc, of which we knit only one yarn over. Double crochet around the next arc, knit the stitches together, tie the remaining two double crochets. We continue to knit another Eiffel tower around the next two arcs of air loops (photo 2).

We tie the row with double crochets. We start the row like this: 4 tbsp. without crochet around the arc; 4 tbsp. Single crochet around the next arc, picot of 4 ch. (4 ch + blind loop in the first ch of this picot), 4 tbsp. without a crochet around the same arc. In this way we tie all the arcs, with the exception of the junction of the flowers: here we knit 4 tbsp for each arc. without a crochet and do not make a picot (photo 1). The crocheted Japanese napkin is ready. We moisten, straighten, attach with pins (while the napkin itself lies face down!), iron with steam and leave to dry straightened (photo 2).


Openwork

Very popular and beloved by housewives, crocheted napkins are beautiful openwork napkins, so airy and delicate that they look like clouds. You don’t even want to put anything else on such napkins; they don’t need additional decorations. Every needlewoman should learn how to knit such lace motifs, and detailed diagrams and descriptions of openwork napkins will help with this.

Napkin "Spring"


The finished napkin will have a diameter of 41 cm, and will definitely delight all household members with its beauty for a long time.

Preparing to knit a napkin:

Yarn — Pekhorka, white, Successful, 100% cotton, 50 g – 220 m

Hook — №2.

Abbreviations for the diagram:

Dc – double crochet;
Sc – single crochet;
VP - air loop;
Sp – connecting loop;
S5N – a column with 5 crochets;
S2H - double crochet stitch.

Knitting pattern and description of how to crochet a napkin:


1st row: into the ring we knit 3 Ch, 23 Dc, connect Sp;

2nd row: 3 Ch + 3 Ch, 1 Dc in the 4th loop from the hook, * skip one loop - 1 Dc, 3 Ch, 1 Dc in the base of the column (see diagram) *, ending with Sp;

3rd row: 7 Ch + 9 Ch, * 1 C5H in the column of the 2nd row, 9 Ch *, ending with Sp in the 7th Ch;

4th row: Sp, 3 Ch (equal to the first double crochet), 4 dc, 5 ch, 5 dc*, ending with sp;

5 row: *4 Ch (equal to 1C2H) + 7 Ch, 1 C2H in the same loop, in the arch - 3 Dc, 5 Ch, ​​3 Dc*, repeat, finishing row Sp;

6th row: *4 Sp to the middle of the arch, 3 Ch (equal to the first double crochet), 4 Dc, 1 Ch, under the arch 3 Dc, 5 Ch, ​​3 Dc, 1 Ch*, finishing with Sp;

7th row: *3 Ch (equal to the first double crochet), 1 dc, in one base of the column we knit 1 dc, 1 ch, 1 dc, 2 dc, 1 ch, under the arch 3 dc, 5 ch, 3 dc, 1 ch *, finish Sp;

8th row:

9th row: 3 ch (equal to the first double crochet), 2 dc, 2 ch, 3 dc, 3 ch, under the arch 3 dc, 5 ch, 3 dc, 3 ch *, finish with sp;

10th row: 3 ch (equal to the first double crochet), 2 dc, 2 ch, 3 dc, 1 ch, under the arch 3 dc, 5 ch, 3 dc, 1 ch *, finish with sp;

11th row: *3 Ch (equal to the first double crochet), 2 dc, 1 ch, 3 dc, 3 ch, under the arch 3 dc, 5 ch, 3 dc, 5 ch, 3 dc, 3 ch*, ending with Sp.

We knit the remaining rows of the napkin according to the pattern.

Napkin “Summer Meadow”


Preparing to knit a napkin:

Yarn — 40 g of “Successful” yarn from “Pekhorka”, yellow, 100% cotton (50 g – 220 m);

Hook — №2.

Abbreviations for the diagram:

Etc. – previous row;
CCH – double crochet;
VP - air loop;
SS – connecting column;
RLS – single crochet;
Pico – we knit from three VPs;
СС2Н - double crochet stitch.

Knitting pattern and description of how to crochet a napkin:


We start each row with 3 VPs, they are equal to 1 Dc. We end with SS, unless otherwise indicated in the text.
We collect eight VPs and connect them into an SS ring.

1st row: 3VP, 23СН;

2nd row: 3VP, 4VP *2DC with a common top, we knit one in the same loop, the second through one, 4VP*;

3rd row: 3VP, 4СН (into the arch from VP, p.r.), 1VP * 5СН (into the arch from VP, p.r.), 1VP*;

4th row: 3VP, 4СН in the vertices of the SSN, p.r., 3VP * 5СН in the vertices of the SSN, p.r., 3VP*;

5 row: knitted in the same way as the 4th, but in the intervals between dcs we knit 4 chain stitches;

6th row: 3VP, 4CCH at the tops of the CCH, p.r., 2VP, 1CCH under the arch from the VP, p.r., 2VP *5CCH, 2VP, under the arch 1CCH, 2VP*;

7th row: 3VP, 4CCH in the tops of the CCH, p.r., 2VP, 3CCH in the CCH, p.r., 2VP * 5CCH, 2VP, 3CCH in the column, p.r., 2VP*;

8th row: 3VP, 4DC in the vertices of the DCS, 2VP, 2DC in the first two DCS, 1VP, 2DC (1st again in the 2nd SSN of the previous row, and 2nd in the 3rd DCS, 2VP * 5DC, 2VP , 2СН, 1ВП, 1СН, in the same loop, 1СН in the next one, 2ВП*;

9th row: 3VP, 4CCH in the tops of the CCH p.r., 2VP, 2CCH, 3VP, 2CCH, 2VP * 5CCH, 2VP, 2CCH, 3VP, 2CCH, 2VP*;

10th row: knitted similarly to the 9th row, but instead of 3 VPs between the DCs, now 5 are knitted;

11th row: 3VP, 2СН, 2СН with a common top, 2VP, 2СН in the ССН p.r., 2VP, in the 3rd VP p.r. 3DC, 2VP, 2DC, 2VP *2DC with a common top, 1DC, 2DC with a common top, 2VP, 2DC, 2VP, 3DC in the 3rd VP, 2VP, 2DC, 2VP *1DC in the 3rd VP, 1DC in the 1DC row;

Row 12: 3VP, 2CCH with a common vertex in 2CCH, p.r., 2VP, 2CCH in each CCH, p.r., 2VP, 2CCH in the 1st CCH, p.r., 1CCH, 2CCH in the 3rd CCH, p.r., 2VP, by 2Dc in each dc p.p., 2 VP * 3 dc with a common top, 2 ch, in the next two loops 2 dc, 2 ch, in the next three loops - 2 dc (from the 1st dc), 1 dc (from the 2nd dc), 2 dc (from the 3rd CCH), 2 VP, in 2CCH p.r. 2DC, 2VP * 1DC in 3VP of the beginning of the row and 4DC in each next loop;

Row 13: 3VP, 1CCH in the 2nd CCH, p.r., 2VP, 2CCH in both CCHs, p.r., 2VP, 5CCH, (2CCH, 2VP, 2CCH) – in the 4th CCH, p.r. *2СН, 2ВП, 2СН, 2ВП, 5СН, 2ВП, 2СН, 2ВП, 2СН*;

Row 14: 3VP, 1DC, 5VP * 2DC, 2VP, 5DC, 2VP, 2DC, 5VP, 4DC with a common top, 5VP*, 1DC in the 3rd VP and another 7DC in the next loops;

Row 15: 3ВП, 1СН,2ВП, 5СН, 2ВП, 2СН, 13ВП *2СН, 2ВП, 5СН, 2ВП, 2СН, 13ВП*;

Row 16: 3VP, 1SSN, 2VP, 5SSN, 2VP, 2SSN, 6VP, 1SBN in the 7th VP of the arch, p.r., 6VP *2SSN, 2VP, 5SSN, 2VP, 2SSN, 6VP, 1SBN in the 7th VP, p.r., 6VP*;

Row 17: knitted similarly to row 16, but now not 1 sc between 6 VPs, but 3 sc, i.e. one more on each side to the neighboring VP p.r. But the number of framing VPs also remains 6 (six);

Row 18: knitted similarly to row 17, but sc is now 5, i.e. one more on each side, and they are framed not by 6 VPs, but by 7;

Row 19: 3VP, 1DC, 2VP, 2DC with a common vertex, 1DC in the third VP, 2DC with a common vertex, 2VP, 2DC, 7VP, 1SC in the 7th VP, 13VP, 1SC in the 1st VP, PR. , 7VP *2DC, 2VP, in the next five loops - 2DC with a common top, 1DC, 2DC with a common top, 2VP, 2DC, 7VP, 1SC in the 7th VP p.r., 13VP, 1SC in the 1st VP p.r. ., 7VP*;

Row 20: 3VP, 1DC, 2VP, 3DC with a common top, 2VP, 2DC, 7VP, in the arch between the RLS p.r. we knit 13DC, 7VP * 2DC, 2VP, 3DC with a common top, 2VP, 2DC, 7VP, 13DC, 7VP*;

Row 21: 3VP, 1Dc in dc, p.r., then 2dc in the next 2dc, p.r. (i.e., we skip the dc with a common top in the row), 7 VP, 1 sc in the 1st dc in the row, we knit 2 ch, 1 sc, skipping one loop in the row. We knit this way until the fan from the SSN p.r. is finished. 7VP *2DC, knit the next 2DC in 2DC, p.r., 7VP, 1SC, (2VP, 1SC) – 6 times, 7VP *;

Row 22: 3VP, 3SSN with a common top, 7VP, in all arches from VP between RLS p.r. we knit 4CC2H with a common top, 3VP, picot, 3VP. We finish 4 СС2Н with a common vertex, then we knit 7 VP * 4 ССН with a common vertex, 7 VP, 4 СС2Н, (3 VP, picot, 3 VP, 4 СС2Н) – 5 times, 7 VP *.

Video lesson - knitting for beginners

It is always more difficult for beginners in crocheting to navigate difficult patterns and descriptions of actions the first time, especially in such a difficult task as knitting napkins. But you can take help from professionals on the Internet in this matter. Videos from professional knitters will help you knit your first napkin much faster.

Video lesson for beginners “how to crochet a napkin”:

In this article, I advise everyone interested in assembling patterns for embroidering unusually attractive crochet napkins, and in addition I will describe their techniques. To weave napkins, you need to have certain skills and be truly a professional in using knitting needles. This includes the elegance of the final product and sophistication, which is an indicator of your skill, and learning the knitting technique is not difficult.

Basic moments

Knitted napkins turn out to be unusually light and in their appearance resemble material snowflakes - the personification of flight and airiness. Extensive application due to a number of advantages:

Knitted napkins are an important item for an establishment where comfort and warmth must always be present. Similar associations should arise in everyone who agreed to learn how to knit napkins with knitting needles.

In the future, they will be able to create similar decorations themselves, according to these arguments, in a modern, modern manner, using the most unusual methods, and they will also be able to make napkins of one shape or another, unusual configurations with drawings and detailed patterned elements. This can only be done with strict miniature directions and real skill in weaving threads.

Experienced needlewomen have been working on napkins for a long time, but other users can learn this skill in the same way. Knitting patterns will attract absolutely everyone, and the product will always be in demand for ordinary buyers.

Don't forget that knitted napkins are not only beautiful decorations for long-lasting memories.

2 knitting methods:
  • thin;
  • ring

In elementary crochet knitting there is direct movement first and back with a turn to complete any formation and making canopies. In this case, areas are not formed by fastening the thread to complete any structure. In ring knitting, a product or tubular figure is tied together in the absence of a seam.

Crocheting is painstaking work

When knitting, the thread is guided by the index finger on the left side. The hook is held in the left hand by the huge and index fingers. The thread falls into a hook stretched into an independent loop and is stretched through it.

The main types of canopies in crochet knitting:
  • weightless;
  • half-column;
  • a column without a double crochet or a column with them.

Types of napkins

Beautiful and simple napkin for the table

Surprisingly, this product will be a good platform for training beginners, and is also a pedestal for pros. In the process itself, it will be possible to learn the craft and thus create masterpieces, having already gotten the hang of it. For example, napkins of not very large volume are suitable for beginners for the purpose of training.

Let us also assume that interest in knitting this product makes it possible to attract many inexperienced users. Also, those who want to make their first napkin should focus their interest on the fact that the product also has different configurations. Here it is possible to note the traditional whole napkins with lace around the edges.

The knitting skill is also honed by the fact that various canopies are used in simple napkins - these are:

  • half-columns;
  • light loops;
  • columns with capes.

All this helps to gain good experience in the process of the activity itself. For example, such patterns are used to decorate an openwork napkin.

Tablecloth made from napkins

An elegant square napkin that can be transformed into a fairly large tabletop for setting the table. The superiority of squares in this is undeniable - they can be grouped and ultimately combined into a huge base.

Detailed diagrams and guide for beginners

Let's start exploring alternatives to knitting these lightweight products; the main quality is considered to be the preservation of comfort in the home, and diagrams and detailed displays of the activity will significantly simplify our task.

It is immediately necessary to highlight that beginners do not need to be intimidated by difficult techniques.

Weaving napkins is absolutely open to beginners. In order to learn faster, you need to choose a number of simple knitting alternatives for the basics. Let's start with ordinary knitting patterns, after which we can move on to the most difficult, but no less exciting ones.

For the purpose of the foundation, of course, it is necessary to select an ornament around which further knitting will take place. Of course, at first there is no need to select very difficult shapes, although they look extremely elegant. If suddenly something doesn’t work out, you will quickly lose interest and simply give up weaving at the initial stage. For this reason, the hands still need to be trained, which means it is necessary to select a basic knitting pattern.

Before you start

The thickness of the hook with which you will weave a napkin depends on the thickness of your preferred threads. The more delicate the hook, the softer the thread used should be.

Beautiful and simple napkin for the table
Simple diagram:

We collect a chain with 8P, combine it into a ring and perform it according to the following scheme.

Step by step guide

  • We do several: 1 VP, 16 StbN, SST. First, we change the knitting stitches in the proper amount: VP, 1P StbSN, 5 VP x 8.
  • We make several weaves around the arch with 5 VP. SST, 5 StbSN, 2 VP x 8, SST; 4 We collect the next 5 sts of the previous formation and arrange them: 2 StbSN, 3 StbSN, 2 StbSN, 2 VP x 8, SST;
  • We omit the 2nd and 6th columns, add 5 StbSN, 3 VP, about 2 VP - 1 StbSN, 2 VP, 1 StbSN x 8 SST. Near the arch, to all VPs without exception, we attach 1 StbSN, 2 VP, 1 StbSN, 3 VP SST;
  • We start tying SST near the arch and attach 1 StbSN, 3 VP, 1 StbSN, 3 VP, miss 1 arch and repeat the weaving. We finish with several 1 VP, 1 PStbSN. Next, we make a few more 1 StbN near the arch and 5 StbSN near the next one, SST. We cut the thread and do not forget to fix it.

Yarn “Solar Lace”

This napkin is for vases. Its caliber is within 12.5 cm. To knit this napkin we need Jonquil yarn 100g 395m of mercerized fabric and hook 2.

Note: SSN – single crochet stitch, VP – weightless eyelet, SP – mounting eyelet, Pico – 3 VP, combined, SBN – single crochet stitch.

Step by step guide

  • In area 3 VP we attach 15 SSN to the third VP. 2 5 VP, 1SSN are combined into SSN formation (PR), 2 VP are combined into the 3rd VP. 3 1SP in the 4th VP, 3 VP and 3SSN are attached with a single top to the PR arch, 4 VP, 4-SSN with the top to the PR arch, 4 VP, VP are combined into the third;
  • 1 VP, 1SBN into a single top, 5SSN into the arch of the previous system, 1SBN into a single top, unite into SBN; 5 3 VP, 3 VP, 1SBN in the 3rd SSN of the previous row, 3 VP, 1SSN in the SBN of the previous row, form in the 3rd VP; 6 2SP in 4-5 VP, 1SBN in an arch, 5 VP, combined into an SBN; 7 4SP, 1SBN in the arch, 5 VP, combined in SBN; 8 4SP, 1SBN in the arch, 3 VP, 2SSN, pin and 2SSN in the arch, 3 VP, combined into SBN.

Oval

Such napkins are always comfortable and warm, like old houses. Previously, there were several round-shaped napkins in everyday life, which were passed down through the family tree to this day. Now the time has come to learn this craft of weaving similar homemade napkins.

A round napkin with diagrams and display will undoubtedly help you create and give a wonderful present to your loved ones, who will nostalgically appreciate your gift.

The size of our napkin is 24 cm. To organize the weaving you will need 50 g 208 m hebash snow-white yarn and a 1.5 hook.

For the purpose of countersinking, combine the chain with 8 VP and close it with 1 SST into a ring. Then attach ring lines and combine 4 sockets with each other in an extreme formation. Add thread with arrows near the sockets in circular lines.

Traditional way of knitting a figured napkin:

Step by step guide

  • To weave this product you will need yarn from threads of red and azure tones, fabric 25 g 150 m and snow-white thread 100 g 400 m, hook 1.15.
  • Take 45 light canopies, then make a column with a chain of ten loops and attach the cr-m 5 VP and dc in the 6th loop of the chain.
  • Link a connecting column to complete the first formation. In any arch, place a column without a double crochet, a half-column, 3 columns with a double crochet, a half-k and again a column without a double crochet. Mix these components with 2 VP. Having tied the outer side, knit a ring with 8 VP, without ceasing to twist the upper part.
  • To complete the SP formation, place 4 VP and a column with 3 double crochets in the VP of the 1st formation. The result should be a shaped ring. 3 In the 3rd formation we knit arches with 5 or 6 VP.
  • Then, we make 2 arches and a grid with 3 VP. 5 In the 6th formation, alternate chains with 5 VP and single crochets in the center of the arches of the previous formation. 6 Knit 5 stitches into any arch, separating them VP.
  • We weave 4 arches with VP. Rally a few more stations with N, broken by VP. We form 3 formations according to 7 VP. Let's start knitting with red thread. In the diagram, the role of the basis of a given system is marked with a red triangle. We attach an arch with 7 VP, then a double stitch and twist it.
  • We will tie 14 double stitches into this arch, in the opposite direction. We twist it again. We attach 3 VP, 2 VP, treble s/n. Repeat steps 1-7 one more time and continue weaving according to the pattern.

If you start attaching the next component instead of 3 VPs, then knit 3 mounting posts, wrap them, and do not stop weaving the napkin according to the pattern. To complete this piece, SPlot 4 VP and connect the column.

Now tie it with azure thread. Increase the number of VP sts with double crochet. In the extreme formation, we form any arch from 3 VP, 3 columns with a nth and a single top, a pin with 5 VP, 3 VP.

Round

This is the most famous type of absolutely all possible napkins produced using a crochet hook. The variety of designs and ornaments surprises both beginners and experienced workers. Let's analyze a number of alternatives and knitting techniques. The caliber of the upcoming convex napkin is 20 cm. We prepare yarn from one hundred percent mercerized fabric 100 g 395 m, hook No. 2.

Note: SP – mounting eye, VP – weightless eye, SSN – single crochet column, SBN – single crochet column, PR – previous several, A – single highest step, i.e. 2 CH are knitted together, Pico - 4 VP and 1SBN in the main VP.

Tablecloth made from napkins

There should be 8 VP in total. We combine 1 5 VP, 1SSN, 2 VP into the 3rd VP, including the 2nd formation and attach them to 3 VP. At the base of the formation we add another 2SSN, 3 VP and 3SSN in 1SSN PR, combining this into the 3rd VP. We make 2SSN from SSN PR, 4 VP, 5СНН and connect them into the last SSN and 1SSN, combine everything into the 3rd VP:

Step by step guide

  • Several 6SSN, made according to the scheme: 2SSN from the SSN to the last SSN of the PR and 1SSN in the half, are joined with 4 VP, 7SSN. Next, as in the 3rd formation: we add 1SSN to any independent SSN in the center, forming a connection with three VPs.
  • We connect 8SSN with 5 VP and 9SSN, made according to the scheme indicated in the previous step 4, we connect in the 3rd VP 6 10SSN, 6 VP, 11SSN volume in the 3rd VP + 1SP. In conclusion, we make 8SSN, 1SSN PR, 8 VP, 9SSN independent, keeping 1SSN on both edges or create a parallelogram, join 8 6SSN, 13 VP, 7СМ in the 3rd VP + 1SP into the 3rd VP + 1SP.
  • We make 4SSN, 6 VP from 1SBN and 6 VP. Add 1SBN, 6 VP, 5SSN to the center of the arch, combine into the 3rd VP + 1SP 10 2SSN, 6VP weave into a small arch. 6SNB, 6VP and 3SSN in the 3rd VP + 1SP 11 1SSN. From 7VP we thread into the 4th SBN PR, made according to the scheme: 2SSN with A, 3VP, 7VP, 2SSN, we supplement them into the 3rd VP.
  • 4VP, pin from 3VP, we add into arches with VP PR is 2SSN with A, 2VP, mesh, 2VP, 2SSN with A, 3VP, pin, 4VP, 1SSN, weave them into the 3rd VP.
Napkin “Tenderness”

The most difficult type of convex napkin, but the final result will certainly be very interesting. The finished decoration will be 36 cm in diameter, and you will need 50 g 220 m blue yarn and a No. 2 hook.

Abbreviations for the pattern: StbSN – double crochet, VP – weightless eyelet, Pet – eyelet. We start weaving by forming 8 VPs that need to be braided.

Step by step guide

  • We start each subsequent row with 3 VP, which replaces 1 StbSN. We end any of them with a column. 1 2 StbSN, 2 VP - repeat 8 times
  • In any StbSN of the previous VP formation we fly 2 StbSN, 2 VP-8 times 3 2StbSN in 1 loop, 1StbSN we pass into the next 2 loops, 2StbSN in 1 loop, 2 VP, we repeat VP until the end of the formation 4 2StbSN in 1 loop, 1StbSN we attach in the next 4 loops, 2StbSN in 1 stitch, 2 VP, until the end of the formation.
  • 2StbSN in 1 stitch, 1StbSN weave to the next 6 canopies, 2StbSN in 1 loop, 2 VP, do until the end of the formation 6 2StbSN in 1 loop, 1StbSN in the next 8 canopies, 2StbSN in 1 loop, 2 VP, repeat until o. Art.
  • 2StbSN in 1 loop, 1StbSN in the next 10 canopies, 2StbSN in 1 loop, 2 VP to o. Art.

Square

A not very well-known model of crocheted napkins, however, is also fascinating. It attracts attention with its beauty and the difficult process of creation. You will be able to test a number of knitting alternatives according to the following patterns. When preparing, you will need snow-white yarn from fabric and other material, 50 g 160 m, size No. 2.

Note: SSN – double crochet, SBN – double crochet, VP – weightless eyelet, SZN – double crochet, SP – mounting eye. Do not forget that in subsequent knitting the portal 3 VPs are replaced by 1 SSN. Do the work as shown in the pictures, but do not forget to look at the diagram so that all the factors are clear.

We start weaving with a sliding loop and attach a ring of 3 VP, 1 SSN, 5 VP, 2 SSN with a single cluster top, 5 VP inside. We repeat everything 6 more times. To complete the formation, instead of 5 VPs, we add 2 VPs and 1 SSN to the initial cluster. There were 8 arches with 5 VP 2 6 VP, SBN next to the next arch with 5 VP. Repeat this step until the formation is complete. We complete with 3 VP and 1 SSN in a single column CH 3 7 VP from the same 1 SSN + 4 BVP. In the main arch we make 6 SSN, 4 VP, 1 SSN near the next one and 4 VP. Repeat and complete in third VP.

Each scheme requires attention and concentration.

Step by step guide

  • 4 VP from the same 1 SSN +1 VP, connect 1 SSN into one loop + 4 VP. Above each SSN of the 3rd formation we attach 1 SSN and 1 VP in columns, 4 VP according to the scheme 1 SSN, 1 VP, 1 SSN are combined into a column of CH of the 3rd formation, 4 VP. Above any SSN of the 3rd order we connect 1 SSN and 1 VP in columns, 4 VP. Repeat everything up to o. Art. We finish with several combinations into the third VP.
  • In the subsequent formation we will attach 4 VP, as 1 SSN + 1 VP. We will connect 1 SSN near the VP of the 4th formation. We form 1 VP and 1 SSN into a column with n. We leave 4 VP, 1 SBN near the main VP of the 4th formation - that’s 4 VP, 1 SBN to VP and so on 3 more times, 4 VP. We finish the formation and connect it into the 3rd VP.
  • We do 4 VP as 1 SSN + 1 VP. We leave 1 SSN near the main VP, 1 VP. 1 SSN in the CH column, 1 VP, 1 SSN near the VP, 1 VP, 1 SSN in the CH column, 4 VP, 1 SBN on the main arch consisting of 4 VP, 1 SBN and so on 2 more times, 4 VP. We repeat the completion of the formation.
  • We braid 3 VP as 1 SSN, 1 VP, 1 SSN 7 more times. Let's make 4 VP, 1 SBN into an arch. 4 VP, 1 SBN leave near the arch 2 times in a row, 4 VP. We are finishing the build.
  • We weave 3 VPs like 1 SSN. 2 VP, 1 SSN 7 more times. 4 VP, 1 SBN in the main arch, 4 VP, 1 SBN near the arch, 4 VP. We complete the formation again and combine into the 3rd VP 9 3 VP. We form it as 1 SSN, and 3 VP, 1 SSN 7 more times. 4 VP, 1 SBN in the 1st arch and 4 VP. We complete the weaving.
  • We weave 5 VP as 1 SZN. Let's connect 1 VP, 1 SSN into the SN column. 1 VP, 2 SSN near the arch and 1 VP 7 more times. 1 SSN, 1 VP, 2 C3H with a single top. Repeat until the end of the line. We complete 1 С3Н and connect it into 5 VP 11. We do it in any column and connect it to the SN of the tenth formation. We connect 4 VPs as 1 SSN + 1 VP, 1 SSN, a grid of 3 VPs and 1 VP. Repeat until the end and finish by combining into the 3rd VP. We cut the thread and fix it.

Festive

The lace will be 23 by 20 cm in diameter, and with the binding a little larger. This type of knitting is called fillet weaving. We prepare yellowish yarn 36 g 150 m from material and fabric, hook No. 2, blunt needle.

Detailed description:

According to the diagram, we get 23 cells. In order to think over the required number of VP for the purpose of 1 chain, you should increase 23 by 3 and then add 3 more VP for the purpose of turning. There should be a total of 72 loops and remember that a napkin filled with structure elements is 2 SSN from inside the cell, and a useless one is 2 VP. Even circles are read from the left side to the right, and unpaired circles are read from the right side to the left.

We start with a 4VP chain, so the 1st element is filled. If one of the elements turns out to be useless, then you will need to add 2 more VPs and place them in the 8th VP. We connect the SSN into any loop of the chain until the end of the line. The result is 70 SSNs, taking into account three growth overhangs replacing the 1st SSN.

We start with 3 VP, then 2 SSN and another 1 SSN, 2 VP, drop 2 in the base and in 1 SSN, and again 2 VP in the third SSN. Thus we weave until the final cell according to the diagram, i.e. at the end of the formation there should be 4 SSNs. We complete the SSN with 3 loops and increase. In total, there will be 23 cells in service, of which 2 on the outskirts are full.

All loops are counted; if necessary, you can mark them separately.

This is an unpaired system. We start weaving from the right side to the left according to the pattern. 1 element is full, then 8 free cells, 5 filled and you get 16 SSN, 8 free, 1 filled. Full cells are connected into one arch of light canopies. 4 1 element complete from 4 SSN8, 6 free, 2 filled 7 SSN, 5 free, two complete 7 SSN, 6 free, 1 filled 4 SSN.

The lace starts from the left side to the right. If the gaps in the meshes are very large, it means that the loops are loose and it is necessary to change the hook to a small one - then the weaving will become denser.

Next we proceed to the following weaving pattern:

1 filled element 4 SSN, 1 simple, 1 full 4 SSN, 2 with gaps, 4 filled 13 SSN, 2 empty, 2 full 7 SSN, 1 empty, 4 filled 13 SSN, 2 with gaps, 1 full 4 SSN, 1 empty , 1 completed 4 SSN. The diagram is read from left to right.

In order not to miss the SSN unit in the formation, it is necessary to control the weaving by counting the number of filled cells one after another, then multiply them by 3 and add 1. For example, you have ten full cells one after another and this means that you need to calculate empty: 10 cells 3 SSN + 1SSN = 34 SSN. According to this, 10 full cells are the same and equal to the 34th SSN.

We begin to knit the next 28 rows according to the pattern.

The product only has windy cells, in addition to the 1st and final ones, which are considered the frame of the knitted image. We carry out an attractive binding according to the scheme, so the base will turn into an attractive napkin with a processed end. We turn the lace to face us and instantly tie 1 SSN into the 4th loop of the warp, without adding extra trim.

Having knitted the 1st SSN, we weave a mesh of 3 light canopies, strengthen it with a column into the main light loop. Next, we again thread 1 SSN into the nth base of the mesh. In this way you should be able to make 6 SSNs in one point and 5 pins around. Now we strengthen the 4th loop with a mounting stitch and again, in the 4th loop we knit 6 SSN with a pin.

The decorations are secured along the frontal lobes using any 2 lines and a side loop. We tighten the p-ku and hide the thread with the support of the needle with a stupid ending in the weave. After washing, the loops will settle down, and will completely align after ironing.

The final stage

After the napkin is ready, it must be thoroughly steamed and starched. Users do not yet know how to starch a knitted napkin and the following guide will help. Having studied the instructions, we can conclude that all methods are outdated and no longer relevant. First, you have to prepare glue from starch, but this turns out to be quite problematic due to the lack of pure starch.

On a note

It is much easier and faster to soak a napkin in wallpaper glue, which in its structure contains particles of starch that do not cause yellowness. After drying, the napkin becomes white, and excess glue disappears instantly, its appearance becomes simply flawless.

Apply a weak composition by diluting it with water and dip a napkin in it, then let it dry. After this, you yourself will notice that in front of you is an excellent copy, uniform, without stains or curls, which can be given as a gift.

Wallpaper superglue is easy to stir, but be careful not to stain the product with excess glue, otherwise stains will appear.

In conclusion, I would like to say that knitted napkins are probably very fashionable. In recent years, the demand for this kind of openwork decoration has only increased, and weaving napkins yourself is even more interesting. This is due to the great possibilities of their use in everyday life.

Probably every person knows how elegant napkins look on small tables, bedside tables, or conveniently located under flower pots and vases, and this product can provide actual benefits to everyone.

Here are just some of the benefits this product can provide:
  • Firstly, knitted items have their own uniqueness. With them you will always stand out in the crowd, if you can meet people wearing similar clothes.
  • Relevance of information

    Availability of application

    Topic disclosure

    Reliability of information



Random articles

by Notes from a Wild Mistress When you decide to have your skin professionally cleansed, you should listen carefully to...