Probably no one today can be surprised by such a phrase as TPU material. What this is, however, not everyone knows. Where is it used? What features does it have? How to distinguish thermoplastic polyurethane from injection molding? Despite the external similarity, their operational parameters and consumer properties are completely different.

TPU material - what is it?

So, more details. TPU material - what is it? What signs does it have? In fact, it is not difficult to distinguish it. First of all, the material has low residual deformation, which allows products made from it to be used as seals. Secondly, TPU can be recycled, saving on raw materials. Thirdly, the material is completely free of catalysts. Fourthly, it has a long service life. In addition, the material is resistant to abrasion, microorganisms and hydrolysis.

In principle, these qualities are also inherent in polyurethanes obtained by traditional methods. However, only TPU can be processed on equipment designed for the production of ordinary plastics - machines, lines and devices called injection molding machines.

When did it all start?

And now a little history. When did TPU material appear? What reasons influenced its occurrence? It all started, according to historians, back in 1865. An unusual announcement was made by a billiard ball company. Ten thousand US dollars were promised to anyone who found a material that could replace ivory. In 1869, John Hiatt decided to use nitrocellulose. He managed to achieve excellent quality and properties, after which he decided to found his own company. From that moment on, the rapid development of injection molding machines and the materials produced with them began. Today, this industry has achieved incredible heights.

TPU production

What is the manufacturing process? TPU material - what is it in production? Let's start with raw materials. The production of TPU requires granules obtained from previously reacted polyurethane components. Of course, initially they had properties that made it possible to synthesize the material. These same granules are poured into the hopper of the injection molding machine. Then they are fed through a screw into the heating zone. After this, the plastic mass can be injected into a mold under pressure (for the manufacture of complex parts) or extruded, that is, squeezed out through a die - a hole of a specific configuration (for the manufacture of simple parts, such as bars, strips, sheets).

Advantages

In short, the combination of the chemical properties of TPU together with their processing methods allows us to obtain materials with simply excellent physical parameters. One of the main ones, for example, is high heat resistance. For most products made from TPU, the onset of softening temperature is 120-140 degrees Celsius. In this case, the cooled material completely restores all its parameters. While ordinary polyurethanes cannot be restored after such a temperature.

The possibility of recycling the material was also mentioned above. Unusable parts are crushed and sent there.

A significant advantage is high wear resistance. Thus, the product can serve as excellent protection. The material is also resistant to ultraviolet radiation. In general, all these advantages make it possible to obtain magnificent products with remarkable qualities. Cases for Samsung, Nokia and other phones are made from this material, for example. These products are especially popular today. However, no matter what product you choose, you will definitely be satisfied.

Combining the benefits of a traditional silicone soft case and a hard crystal (plastic) case, IPAKYCASE has put them together to create a new clear soft rubber case. The soft, clear rubber case has the high visual clarity of hard plastic cases and combines the flexibility and durability of silicone cases. Each case has a unique pattern and a wide range of colors. More importantly, the case allows you to enjoy peace of mind because your phone is completely protected from the harsh realities of everyday use, while looking great at the same time. Each case has been individually designed to provide easy access to all of your phone's ports and buttons.

CHARACTERISTICS:

• Made from thermoplastic polyurethanes (TPU), which are a class of plastic with many beneficial properties such as elasticity, transparency, resistance to fat, abrasions and abrasions. TPU is commonly used in the sporting goods industry.
• High elasticity with very good tensile strength properties. Excellent abrasion resistance. Much better than silicone. This material can also be found in the back of trucks and on escalator handrails! - High visual transparency with a unique pattern on each phone model and a large selection of colors.
• Durable and flexible - can be freely bent, compressed, and the case will always remain in excellent condition. Very good tensile strength. Excellent mechanical properties combined with rubber-like elasticity - Slim, elegant design.
• The ideal defender. Resistant to grease, scuffs, scratches, abrasions and dust.
• Odorless material. Our clear rubber cases do not have the plastic, silicone scent found on most cases.
• Perfect hold. TPU cases will give you an extra sense of protection, preventing your phone from slipping out of your hands. BUT our cases are not sticky like most silicone cases and thus will not collect dust and debris from your pocket or bag like silicone cases do.
• Excellent fit. Smart and rational design ensures that cases are fully compatible with a specific phone model, thereby providing full access to all buttons, ports and connectors of the phone.

“What is the difference between TPE and EVA? What does tunit promise me? PVC is glue? What are the soles of these boots even made of?” - The modern buyer wants to know everything. In order not to lose face in front of him and be able to explain whether such a sole is suitable for him, carefully study this article. In it, process engineer Igor Okorokov explains what materials shoe soles are made of and what is good about each of them.

- engineer-technologist of shoe production, graduate of Vitebsk State Technological University of Light Industry. Since 2002, he has been working as a specialist for various shoe companies in Russia.

Materials used to make soles

The sole is one of the most important parts of the shoe, which protects it from wear and largely determines its service life. It is the sole that is subjected to intense mechanical stress, abrasion on the ground and repeated deformations. Therefore, the materials used to make soles must be as resistant to environmental influences as possible. In this article I will tell you what materials a sole can be made from and what the advantages and disadvantages of each of them are.

Sole attachment methods

There are two main methods of attaching the sole: adhesive and injection. But contrary to popular belief, fastening technology does not in any way affect the consumer properties of shoes. The adhesive method is used for classic and dress weekend shoes, most often with leather or tunit soles. In the manufacture of comfortable shoes for everyday wear, the injection molding method is most often used.

Soles made of different materials have different fastening methods. Polyurethane soles are most often made by direct casting, but in rare cases a pre-molded sole is glued to the upper. TPU soles are produced by high temperature injection molding. Heels are also made from thermopolyurethane. The TPE bottom is injection molded and then glued. PVC soles are most often attached using the injection molding method in the manufacture of footwear for outdoor activities and everyday wear. EVA soles are attached to the upper of shoes only by injection, while tunit and leather soles are attached only by adhesive. For TPR, both options can be used.

Polyurethane (PU) soles

Advantages: Polyurethane has good performance properties: it weighs little because it has a porous structure, has good abrasion resistance, is flexible, has excellent shock absorption and good thermal insulation. The soles made of polyurethane are light and flexible, therefore they are used in shoes where these characteristics are of particular importance.

Flaws: The porous structure of polyurethane is also a kind of flip side of the coin. For example, because of it, polyurethane soles have poor grip on snow and ice, so winter shoes with PU soles slip a lot. Another disadvantage is the high density of the material and loss of elasticity at low (from -20 degrees) temperatures. The consequence of this is fractures in the places where the sole bends, the speed of which depends on the characteristics of the use of the shoe, in particular, on the person’s gait, the degree of his mobility and other factors.

Thermo polyurethane (TPU) soles

Advantages: Thermopolyurethane has a fairly high density, so it can be used to make soles with deep tread that provide excellent traction. Another advantage of TPU is its high wear resistance and resistance to deformation, including cuts and punctures.

Flaws: The high density of thermopolyurethane is at the same time its disadvantage, because because of this the weight of the thermopolyurethane sole is quite large, and the elasticity and thermal insulation leave much to be desired. To improve these characteristics, TPU is often combined with polyurethane, thereby reducing the weight of the sole, increasing its thermal insulation and elasticity. This method is called two-composition casting, and it is quite simple to recognize: the sole made using this technology consists of two layers, and the top layer is made of polyurethane (PU), and the bottom one, in contact with the ground, is made of thermopolyurethane.

Thermoplastic elastomer soles (TEP, TRP)

Advantages: This material can be considered all-season. It is durable, elastic, resistant to frost and wear. TEP provides good shock absorption and traction. Thanks to the technology of manufacturing the sole from TPR, its outer layer is monolithic, which provides it with strength, and the inner volume is porous, retaining heat. Thermoplastic elastomer can be recycled, which means that its use in soles saves resources and does not pollute the environment.

Flaws: At high and very low temperatures (over 50 degrees and below -45 degrees), TPE loses its properties, so it is used only in everyday shoes and, by the way, is rarely used for safety shoes.

Soles made of polyvinyl chloride (PVC, PVC)

Advantages: PVC soles resist abrasion well, are resistant to aggressive environments and are easy to manufacture. They are often used in household and children's shoes, and previously they were especially widely used for safety shoes, since when mixed with rubber, PVC acquires properties such as oil and gasoline resistance.

Flaws: PVC is used only in the production of casual shoes for autumn or spring, because this material has a large mass and low frost resistance, and cannot withstand temperatures below -20 degrees. In addition, PVC soles do not attach well to leather shoe uppers, so quality leather shoes with PVC soles are difficult and expensive to produce.

Ethylene vinyl acetate (EVA) soles

Advantages: EVA is a very light material with good shock-absorbing properties. Mainly used in children's, home, summer and beach shoes, and in sports shoes- in the form of inserts, because it is able to absorb and distribute shock loads.

Flaws: Over time, EVA soles lose their shock-absorbing properties. This occurs because the pore walls break down and the entire mass of EVA becomes flatter and less elastic. Also, EVA is not suitable as a material for winter shoes, since this material is very slippery and not resistant to frost.

Thermoplastic rubber (TPR) soles

Thermoplastic rubber- This is shoe rubber made from synthetic rubber, which is stronger than natural rubber, but no less elastic. However, modern technologies make it possible to increase its flexibility with the help of various additives.

Advantages: Thermoplastic rubber has a low density and, accordingly, less weight than other materials. There are no through pores in it, so moisture does not pass through it. However, there are surface pores in TPR, and they provide high thermal protection. In addition, TPR, like other porous rubbers, is an elastic material that provides good shock-absorbing properties. Thanks to this characteristic, shoes with TPR soles relieve unnecessary stress on the legs and spine.

Flaws: The low density of the material can be not only an advantage, but also a disadvantage. In the case of TPR, it leads to the fact that the sole made of this material does not have particularly outstanding heat-protective properties. In addition, in wet and frosty weather, the thermoplastic rubber sole slips a lot.

Leather soles

Advantages: Leather soles are used in all types of shoes, including children's, home and dress shoes of all seasons. Shoes with leather soles look great and allow the foot to breathe, as it is a natural membrane.

Flaws: When worn in wet weather, the leather sole may become deformed, and caring for it requires the constant use of special sprays and impregnations. Leather has low wear resistance, so it is recommended to install preventive maintenance on leather soles, and it is mandatory for winter shoes, otherwise without it the sole will slide on ice and snow and deform even faster.

Tunit soles

Tunit- This is rubber with the inclusion of leather fibers, so the second name for this material is “leather fiber”.

Advantages: In appearance, hardness and ductility, tunit soles are similar to leather ones, but they behave better in use: they hardly wear out or get wet. These soles are easy to apply texture to, which gives them a little more grip than leather.

Flaws: But even despite this, shoes with tunit soles are very slippery due to the high rigidity of the material. Therefore, tunit is used in the manufacture of only summer and spring-autumn shoes using the adhesive fastening method.

Wood soles

Advantages: Wood is an environmentally friendly and very hygienic material, and wooden soles have original appearance. However, recently, instead of wood, plywood is more often used to make shoes. It can be made from birch, oak, beech or linden wood and as a material it is easier to machine, is easy to shape and is inexpensive. Soles using cork material are also popular. When dealing with them, you need to understand that balsa wood, due to its natural softness, cannot serve as the main material for making soles, so cork is used only for decorative covering.

Flaws: Wooden soles are hard, wear out quickly and have poor water resistance. A lot of material is consumed in the manufacture of such soles. Cork coverings are susceptible to chips and defects due to the softness of the material.

“What is the difference between TPE and EVA? What does tunit promise me? PVC is glue? What are the soles of these boots even made of?” - The modern buyer wants to know everything. So as not to lose face in front of him and...

Walk outside in -60C? Easily! Boots for the most severe frosts, even now to the North Pole. You have never seen such warm shoes! Everyone knows the saying “keep your feet warm and your head cold.” Indeed, no matter what the weather is like outside, it is very important that your feet remain dry and do not freeze. This is especially true for lovers of winter recreation, fishermen, and hunters who spend a long time in the fresh air. But good winter boots will definitely come in handy both for security guards and in a country cottage. Very light, comfortable and at the same time incredibly warm - walking in such boots is a pleasure! Temperature conditions down to -60C Thermal polyurethane sole protects against punctures and slipping Perforated EVA insole collects excess moisture condensation (the insulation remains dry) 7-layer insulation with PU foam, holofiber and foil. Possibility to install spikes. Individual packaging Men's winter boots WOODLINE POWER EPW-60 (art. 1328/1328Ш) Size Upper circumference cm Upper height cm length/width of the sole of the inner insert cm length/width of the sole of the boot cm Fit to size 41 52 40 30/11 31/12 41 42 52 40 11/30 12/31 42 43 52 40 11/31 12/32 43 44 54 40 31.5/12 32.5/12 44 45 56 41 32/12 33.5/13 45 46 56 41 32, 5/12 34/13 46 Season-winter Gender-male Filling fleece/thermal protective layer/non-woven fabric/porous material/canvas with wool and linen/foil/hydrophobic fibers/mesh for abrasion protection Material-ethylene vinyl acetate (EVA), sole : polyurethane (PU) Features - 8-layer liner, polyurethane (PU) sole with the ability to install spikes, perforated EVA insole collects excess moisture condensation (the insulation remains dry) Warranty - 1 month

The height of the boots is 24 cm. blind flap, soft edging Upper: natural chrome hydrophobic leather (crust) and Cordura (black), overshoes (TPU) Lining/insulation: Aria, Thinsulate 3M 200gr Sole: Alpy System (rubber) wear-resistant, deep tread Attention! Removable lugs shown in the photo are purchased separately. Sole attachment method: adhesive TPU overshoes have stiffening ribs in the toe and heel parts Insole: inset Cambrelle and EVA Features of the model: set-in nitro artificial leather insole, can be equipped with lugs, single-layer Sizes: 39-46

Season: winter Upper part material: vamp / heel / boots - genuine leather Lining part material: wool fur Bottom part material: two-layer insole on a foam basis, moisture-wicking Sole fastening method: injection molded Regulatory technical documentation: TR CU 019/2011 "On the safety of products personal protection" Protective properties: without protective toe Type of footwear: boots Series: NEON Sole: PU-TPU Color: black Lining/insulation: woolen fur Fastener: lacing Country: Russia

Gender: unisex Season: summer Upper part material: vamp / heel / boots - genuine leather Lining part material: breathable membrane material Bottom part material: two-layer insole on a foam basis, moisture-wicking Sole fastening method: injection molded Regulatory technical documentation: TR CU 019/2011 "On the safety of personal protective equipment" Protective properties: without protective toe Type of footwear: boots Series: NEON Sole: PU-TPU

Men's Season: winter Main color: black Upper part material: vamp / heel / boots - genuine leather Lining part material: woolen fur Sole fastening method: molded Sole: PU-TPU Color: black Fastener: lacing Country: Russia Size chart Cm 22, 5 23 23.5 24.5 25 25.5 26.5 27 27.5 28.5 29 29.5 30.5 31 Russian size (RUS) 35 36 37 38 39 40 41 42 43 44 45 46 47 48 EUR 36 37 38 39 4 0 41 42 43 44 45 46 47 48 49 UK 3.5 4 5 6 6.5 7.5 8 9 9.5 10.5 11.5 12 13 13.5 Determining your size Determine your size using the following chart: Place your foot on a blank sheet of paper. Mark the extreme boundaries of the foot. Measure the distance between the furthest points of your foot. Find the appropriate size in the table above.

Genuine high quality leather. Side panels, padded piping and tongue are made from durable, dense fabric with a waterproof coating to enhance the durability of the boot's upper. Metal fittings: nut-shaped blocks, large hooks. Decorative elements: branded flags and replicas, sling loops. Reflective parts for working in poor visibility conditions. The two-layer sole is made of PU/TPU and is resistant to oils, crude oil, other petroleum products, acid and alkali solutions, non-toxic and explosive dust. The sole has a wide temperature range of use from -35° to +120°C. The soft edging delicately clasps the ankle and prevents dirt and dust from penetrating into the shoe. A comfortable last ensures comfort during long-term wear. A metal anti-puncture insole can be supplied upon request. Manufacturer: Avangard Safety Group of Companies Color: black-gray Materials: upper - genuine leather, textile (100% polyester) with PU coating; lining - sneaker 3D mesh; accessories - metal; sole - PU/TPU. Standard: TR TS 019/2011 GOST 12.4.137-2001

Durable and lightweight boots made of genuine leather for hiking, traveling and the city. Upper material – genuine leather (nubuck + velor) (th. 1.8 mm) with water-repellent impregnation. The optimal combination of materials ensures the comfort and lightness of this model. The lining is a practical textile material. Removes excess moisture well and maintains a comfortable temperature. Replaceable molded insole. Highly resistant to wear Durable lacing ensures a tight and comfortable fit on the foot TPU sole – has increased abrasion resistance and optimal flexibility Multi-directional tread ensures the best traction on the surface The toe part of the boot has a rubber pad that provides additional protection from mechanical impacts when walking Stainless steel fittings TNV Boden boots combine the lightness and comfort of sneakers with the stability of trekking boots, allowing you to climb to the most amazing corners of the planet. Think how much interesting people and you can meet extraordinary places on your travels. Life is too short to sit on the couch. The sole of the boots is made of thermoplastic polyurethane. Its advantages include: high wear resistance and resistance to deformation and mechanical stress, as well as high density, which makes it possible to produce a deep multidirectional tread that provides good adhesion to the surface. The upper material is a combination of such types of genuine leather as velor and Nubuck with water-repellent impregnation. This combination provides good breathability and wear resistance without sacrificing lightness and comfort. The lining is a practical textile material. Breathes, removes excess moisture well and maintains a comfortable temperature in the boot. The replaceable molded anatomical insole is highly resistant to wear and provides good ventilation. The heel secures the foot, and the rubber pad in the toe part of the boot protects the toes from impact and increases the grip area on the rocky terrain. To make it easier for you to “feel” the shoes, our stores have “slides” - simulators of complex terrain. Characteristics: Weight -380 g (1/2 pair 42 sizes) Size range -41-46

Technical trail running shoe Upper breathable AirMesh + thermally bonded microfiber breathable AirMesh + thermally bonded microfiber: outer structure is abrasion-resistant and heat-sealed with rip-stop fabric Mesh lining + sweat-wicking fabric inserts + stretch tongue Air MeshAir Mesh mesh + stretch fabric inserts sweat-wicking fabric + stretchy Air Mesh tongue. Molded EVA inner sole + double EVA stone guard on the forefoot Molded EVA midsole + double EVA stone guard on the forefoot. The sole is a double sole Frixion XT + Impact Brake System. It is possible to attach cleats with a double sole Frixion XT + Impact Brake System. It is possible to attach spikes Area of ​​application Sky running Running in high mountains Size 36-47.5 through 0.5 Pair weight 560 g Color: Yellow / Black Green / Gray Blue / Red Description Technical sneakers designed specifically for mountain running. The sneakers provide maximum support, secure fit and toe freedom. Microfiber reinforcements provide additional protection against wear and tear. The La Sportiva Bushido is a very lightweight running shoe with excellent grip and an aggressive design. These shoes feature a new STB Control design that ensures stability when running on rough terrain. The TPU frame used in the sneakers flows smoothly to the outsole and is connected by the midsole under the arch of the foot. This allows for synergy between the upper and sole of the shoe, and also provides greater stability to the foot. This makes the shoe even lighter because La Sportiva was able to do away with the weighty stabilizer inserts in the central part. The double sole has joints at different levels. The outsole tread has different sized lugs that provide stability in any situation: on soft and wet ground, rocky ledges or traverses. The outsole's outer lug tread provides excellent traction and protects the foot from injury from excessive twisting. Maximum support and a tight fit of the boot to the foot in the middle do not restrict the freedom of the toes. It is possible to attach spikes, which allows you to continue training even in the winter season. Benefits and Features Compression midsole A boot that follows the exact shape of your foot Optimal combination of flexibility and shock absorption, resistance to wear and damage Outsole designed to reduce the impact of walking and running Ergonomic insoles for mountain running Care instructions Clean your sneakers after each use. All external and internal hinges should be thoroughly cleaned and dried to reduce the risk of rust on metal parts. Leave the sneakers to dry outdoors, out of direct sunlight and away from heaters. La Sportiva recommends carefully selecting the size of your sneakers: your foot should fit well in the last. After each use, the sneakers must be cleaned of dirt and dust by rinsing under a gentle stream of water. If necessary, the insole can be removed and the boots themselves can be placed in a cool, dry place for ventilation. It is best to remove the insole after each use and shake out any gravel that may have accidentally gotten inside the shoe and could damage the integrity of the lining. Do not place newspaper or other paper inside the boots as this may slow down the drying of the boots. Never dry your sneakers in the open sun or near heating devices.

Upper material - combined: genuine chrome leather (thickness 1.4-1.6 mm) + high-strength fabric made of textured nylon thread "Cordura"® 1060D without internal PU impregnation, which ensures high breathability of the fabric Lining - Without lining Sole - Made of TPU (thermopolyurethane), which gives it is lightweight and resistant to aggressive environments (oil, gasoline, acids) Sole attachment method - Direct injection: the lower part of the boot is filled with hot polyurethane and molded under pressure, which ensures its strong adhesion to the insole unit. Valve ("Tongue") - deaf, protects the foot from environmental influences (dust, water, dirt), speed lacing Toe cap - Reinforced from thermoplastic material (TM) Back - Hard from TM Boot height -25 cm Dimensions -38-47 Weight (pair 42 rubles) 1.08 kg

Gender: unisex Season: summer Upper part material: vamp / heel / boots - genuine leather Lining part material: breathable membrane material Bottom part material: two-layer insole on a foam basis, moisture-wicking Sole fastening method: injection molded Regulatory technical documentation: TR CU 019/2011 "On the safety of personal protective equipment" Protective properties: with a protective toe cap 200J Type of footwear: low shoes Series: NEON Sole: PU-TPU Color: black Country: Russia

Weight: 20 g Size (WxBxD): 6x12x2 cm Material: Polyester Oxford 600D TPU Fittings: Duraflex ® Small waterproof waterproof case (pouch) for a phone, walkie-talkie, etc. Manufactured using "welded" technology. All seams are sealed The pouch can be attached to a backpack strap using a carabiner or worn on a belt The front surface has a transparent window Attention! Waterproof zipper does not provide 100% protection against moisture penetration

A lightweight, compact waist bag made from high-quality and durable 600D oxford TPU fabric, designed for fishermen who prefer active fishing and travel light. There is room in it for several boxes of bait, documents, a phone and other little things useful for fishing. The waterproof property of the bag guarantees the safety of its contents even in heavy rain Waterproof pocket High-quality Duraflex fittings Light weight - only 200 grams Volume 2 liters You will never forget your fishing gear at home, because this bag can easily fit everything you need. This bag will be an excellent gift for fishermen and those who like to spend time outdoors Certificate No. - EAEU No. RU D-CN.AG02.A.16384 Type of certificate - Declaration of Conformity Ironing - Do not iron Brief description - For active fishing. Number GTD-10702030/241214/0135935/0 Volume, l-2 Bleaching-Do not bleach Gender-Unisex Seasonality-All-season Wash-Only hand up to 40 Country-China Drying-Vertical drying without spinning Brand-Fisherman NOVA TOUR Dry cleaning-Dry cleaning prohibited Pack volume unit, cubic m.-0.0024 Volume, l- Color-Khaki Main base color-Khaki

Description: genuine high-quality leather, double-layer sole made of PU/TPU, resistant to oils, crude oil, other petroleum products, solutions of acids and alkalis, non-toxic and explosive dust, sole has a wide temperature range of use from -35° to +120°C, comfortable the last provides comfort during long-term wear; upon request, it can be equipped with a metal toe cap and a metal anti-puncture insole Manufacturer: Avangard Safety Group of Companies Color: black Materials: upper - genuine leather; sole - PU/TPU Standard: GOST 12.4.137-2001 Size: 36-46 Protective properties: from petroleum oils and heavy fraction products from general pollution from abrasion from crude oil Weight 1 unit. 1.37 Volume 1 unit. 0.012 (m3) Quantity of goods per package: Packaging of 6 pairs Volume of 1 package: 0.075 (m3) Certificates:

The height of the boots is 24 cm. blind flap, soft edging Upper: natural chrome hydrophobic leather (crust) and camouflage Cordura, overshoes (TPU) Lining/insulation: Aria, Thinsulate 3M 200gr Sole: Alpy System (rubber) wear-resistant, deep tread Attention! Removable lugs shown in the photo are purchased separately. Sole attachment method: adhesive TPU overshoes have stiffening ribs in the toe and heel parts Insole: inset Cambrelle and EVA Features of the model: set-in nitro artificial leather insole, can be equipped with an anti-slip system (purchased separately if available in the store, or to order) Sizes: 39- 46

A functional, waterproof waist bag suitable for wading and active fishing enthusiasts. The bag has two large main compartments where all boxes of bait will fit One additional compartment for small items RODHOLDER - a holder for a spinning rod so that your hands are free when changing bait Made from durable and incredibly high-quality 600D oxford TPU fabric with special impregnation, this bag will keep perfect appearance for many years Now all the necessary fishing tackle is at your fingertips: you no longer have to be afraid that you have forgotten hooks and bait at home Certificate No. - EAEU No. RU D-CN.AG02.A.16384 Type of certificate - Declaration of Conformity Ironing - Do not iron Brief description - For active fishing. Number GTD-10702030/241214/0135935/0 Volume, l-10 Bleaching-Do not bleach Gender-Unisex Size, HxWxD, cm-30x30x16 Seasonality-All-season Wash-Hand only up to 40 Country-China Drying-Vertical drying without spinning Brand- Fisherman NOVA TOUR Dry cleaning - Dry cleaning prohibited Packaging volume. unit, cubic m.-0.0072 Volume, l- Color-Khaki Main base color-Khaki

Season: winter Main color: black Upper part material: vamp, heel, boot - genuine leather Lining part material: woolen fur Sole fastening method: molded Regulatory technical documentation: TR CU 019/2011 "On the safety of personal protective equipment" Protective properties: without protective toe Type of footwear: leather boots Series: NEON Sole: PU-TPU Color: black Lining/insulation: woolen fur Country: Russia

Gender: unisex Season: summer Upper part material: vamp / heel / boots - genuine leather Lining part material: breathable membrane material Bottom part material: two-layer insole on a foam basis, moisture-wicking Sole fastening method: injection molded Regulatory technical documentation: TR CU 019/2011 “On the safety of personal protective equipment” Protective properties: without protective toe Type of footwear: low shoes Series: NEON Sole: PU-TPU Color: black Country: Russia

Gender: unisex Season: summer Upper part material: vamp, heel, boot - genuine leather Lining part material: breathable membrane material Bottom part material: two-layer foam-based insole, moisture-wicking Sole fastening method: injection molded Regulatory technical documentation: TR CU 019/2011 "On the safety of personal protective equipment" Protective properties: with a protective toe cap 200J Type of footwear: leather boots Series: NEON Sole: PU-TPU

Weight: 340 g Size (WxHxD): 31x19x12 cm Material: Polyester Oxford 600D TPU Convenient waterproof waist bag The main volume is closed with a waterproof zipper with two locks The belt is made of quick-drying mesh and has two pockets Additional internal pocket the front surface contains reflective elements Attention! Waterproof zipper does not provide 100% protection against moisture penetration