Make your own bridal garter. DIY wedding garter - how to create an irreplaceable wedding accessory? DIY nautical style wedding garter

A garter is a piece of women's underwear in the form of an elastic band that holds the stocking in place. If in earlier times this element of clothing had a practical meaning, now it is used by brides as a decorative accessory to maintain tradition. Wedding garter: do-it-yourself or store-bought? The choice is up to the bride.

Wedding Garter Options

Throughout the entire wedding celebration, this attribute of the bride is hidden under the dress. However, at the end of the evening, the garter will go to one of the guests. Therefore, it must be sewn carefully and efficiently. In addition, the photographer can focus attention on it during the photo shoot and it is better that the garter is in harmony with the bride’s outfit. A wedding garter can be made of satin, lace, organza, guipure, silk, or a combination of these fabrics. Beads, beads, ribbons, pearl threads, flowers, brooches, etc. are used as additional decor.

Stages of creating a wedding garter

1. Choose the type of future accessory, taking into account appearance dresses. The garter should be in harmony with the dress in color, material and style;
2. Decide on materials: fabric, decor. You will also need an elastic band to keep the garter on your leg;
3. Take measurements. The garter is worn on the leg above the knee. You need to measure the circumference of your leg at its location. The elastic band for the garter should be slightly smaller than the obtained size. The fabric for the garter will need 1.5-2 times the length of the elastic.
4. Buy everything you need;
5. Bring your idea to life. The garter can be sewn by hand or on a sewing machine. The decor is best sewn on with threads, but it can also be glued using hot glue.

Satin Garter

A narrow, laconic garter made of satin fabric will be a good accessory to a loose Empire style dress.

In order to sew a garter, you need to take two satin ribbons of the same color, an elastic band and a decorative buckle without a tongue.

Operating procedure:

1. Take an elastic band of the required length and a satin ribbon 1.5 times longer than the elastic;
2. Sew the ribbons along the entire length and insert an elastic band inside;
3. Distribute the elastic evenly along the drawstring of the garter;
4. Thread the resulting blank into the buckle and sew the edges of the garter.

In some cases, brides wear two garters to their wedding - one the groom throws to his unmarried friends at the end of the evening, and the second is left for the first wedding night.

In this case, both garters should be made in the same style. The garter for guests should be wide, for the wedding night - narrow. To make a narrow garter, the master class given above is suitable. The blank for a wide garter will be the same (there is no need to insert an elastic band or sew the edges.). Next, you need to sew a gathered wide satin ribbon to this blank. You can sew the ribbon along the bottom edge or in the center. Then all that remains is to insert the elastic and sew the edges of the garter. Instead of satin ribbon you can take a piece of wide lace or organza. This will create a set of two accessories.

The video shows how to correctly determine the amount of fabric and sew a narrow satin garter:

Lace garter

A lace wedding garter looks very delicate and elegant. It goes well with a lush wedding dress and a dress with lace inserts.

This garter is easy to make without a sewing machine. For this you will need an elastic lace ribbon, a narrow satin ribbon for decoration, beads, and threads.

The process of making a garter is very simple and does not take much time. Need to measure required amount elastic tape, cut and join the edges. Then decorate the garter with a satin ribbon bow and beads.

Vintage garter

TO lace dress in the Godet style, as well as a dress with a train, a Victorian-style garter will suit.

To make it you will need several types of wide and narrow lace, an elastic band, a pearl ribbon, a vintage brooch, and narrow ribbons.

Operating procedure:

1. Measure the length of the elastic along the leg, cut the lace 15 cm longer than the elastic;
2. Attach several types of lace with a ladder to make flounces;
3. Stretch the elastic and attach the lace to the elastic in the center;
4. Gather the lace and secure with an elastic band;
5. Sew on using a sewing machine;
6. Decorate the garter with a pearl ribbon, satin ribbons and a brooch.

Satin ribbon and lace garter

Necessary materials: wide lace (guipure or organza), satin ribbon, elastic band 4-5 mm narrower than ribbons, beads, narrow satin ribbons.

Operating procedure:

1. Measure out the required amount of lace and take a satin ribbon of the same length;
2. Sew the ribbon to the lace using a sewing machine, making two lines along the edges of the ribbon. So that there is a free channel inside;
3. Insert the elastic and distribute it along the drawstring;
4. Sew the edges of the garter;
5. Decorate the garter with beads and bows made from narrow satin ribbons.

More details on how to do different kinds DIY wedding garters, presented in the video selection:

A wedding leg garter is an elastic lace strip of fabric decorated with beautiful decor. This accessory is placed on the bride’s right leg just above the knee. It can be either wide or narrow.
In North America, it is customary to wear two garters at once to a wedding - a wide “lucky” one tossed at the end of the evening by the groom to his unmarried friends. The narrow one is called “honey” - it remains for the newlyweds’ happiness. The narrow one is worn above the first one by about half a palm.

I would like to present to your attention a few photos with ideas for creating a bride’s garter with your own hands. It’s not easy to do, but it’s very simple. You will need elastic, lace, ribbons and decorative ornaments.

How to Make a Victorian Bridal Garter

Take several types of lace and soft elastic. You will also need threads, pins, scissors and embellishments. To begin, take an elastic band and try it on your leg, adjust the tension to a comfortable level and mark with a pencil. Cut the lace 15 cm longer than the length of the elastic.

Fasten several types of lace with a ladder with pins so that flounces come out. Stretch the elastic and attach the middle of the work (lace with elastic).

Gather the lace and secure it with needles. Sew everything by hand or by machine. Now all that remains is to decorate the bride’s jewelry with ribbons and a string of pearl beads.

Wedding accessory on the leg for a wedding in blue or light blue

To work you will need lace, ribbons of various widths and lengths (white and blue, blue with white polka dots), an elastic band, a beautiful buckle, needles, pins, threads, scissors.

Take a satin ribbon and lace 1 m long. It is better to singe the ends of the ribbons with a lighter. Place the ribbon over the lace and baste the top and bottom. Place an elastic band between the ribbon and the lace. Sew the ends of the elastic together. Hide the joint by threading it inside the workpiece. Sew the ends of the workpiece together too.

Now let's start decorating the garter. Take three ribbons of different widths and colors and fold them as shown in the picture. Place them together and sew. You can use a burner and solder their ends. Then glue and sew on a buckle or a beautiful button.

Rules for removing the garter

Since this tradition is new to Russia, let’s turn our attention to American traditions. Typically, the time to remove the garter comes after the cutting of the wedding cake, before the newlyweds are ready to leave the guests.

All the bachelors gather around the bride. The groom removes the widest garter from the bride and throws it to his unmarried friends. This wedding accessory promises a quick marriage to anyone who catches it. According to tradition, the bachelor who caught him dances with the unmarried girl who caught the bride's bouquet.

Wedding salons offer a variety of bridal garters. They are usually made in a traditional style.

If you want something original and unique, or simply have a desire to create and create, then you can try to sew this simple accessory yourself.

DIY wedding garter: what is needed?

So, you should prepare:

1. an hour of free time,
2. a little imagination
3. satin ribbon,
4. underwear elastic,>
5. sewing or fine lace,
6. beads of different sizes, rhinestones, beads (for decoration)

How to sew a wedding garter with your own hands?

Detailed instructions: how to sew a wedding garter

To begin, measure the circumference of the leg just above the knee, exactly where the finished product will be located.

The resulting number is quadrupled to obtain the required length of satin ribbon or sewing that will be needed for the base. Cut the strip into two equal parts.

Lace is sewn to one part, to its upper and lower edges (you can use organza or guipure). Usually narrower lace is sewn on top, and wider lace on the bottom. Sometimes finishing is done in two layers.

The second part of the tape is placed on top of the resulting base and sewn, a “tunnel” is obtained.

An elastic band is stretched between the ribbons, the length of which should be equal to the volume of the leg. Fasten the structure with pins and try it on; it should hold tightly, but not squeeze.

Read also:

If everything is in order, the edges are sewn.

Modern brides definitely want to look stylish, fashionable and beautiful. They carefully select a dress, veil, shoes and other accessories in order to look the most beautiful and feminine on their wedding day. But stockings and a wedding garter give any bride a special sexuality - a unique accessory that reflects her femininity and sensuality.

The tradition of wearing a wedding garter is not new. In many countries, a wedding garter for a bride has already become a traditional attribute that is fraught with many customs and legends. The history of the women's garter dates back to the 13th century in France. At that time, this accessory had a purely functional purpose; thanks to the garter, the stockings and tights of the court ladies did not fall off their graceful legs, and also supported the exquisite and intricate underwear.

Which leg should a bride wear a garter on?

At modern weddings, in many countries of the world, it is customary for the bride to wear two garters - on each leg separately or both on the right leg above the knee. Before removing her garter, the bride must first throw a bouquet to her unmarried bridesmaids, and then her groom has the right to remove the garter from her knee, doing this to the cheers of the audience. The groom throws her to his unmarried friends, thus, accordingly, a young man and a girl are selected who will get married in the near future. The bride can also use two garters, both of which are worn on the right leg, one of them is called “happy” in everyday life, and the other, which is worn a little higher, is “honey”. The “lucky” garter is removed by the groom and, according to the tradition described above, he throws it to the guests, and the “honey” one remains on the bride’s leg until the wedding night, symbolizing its mystery and special meaning.

Why should a bride wear a garter?

According to experts, the tradition of throwing a wedding garter goes back to the 14th century, when King Edward III, while dancing at a ball with the Countess of Salisbury, suddenly noticed that her garter had fallen at his feet. At that time, this incident could have become a shame and disgraced the young lady for many, many years. However, the king was not taken aback, and in order to save his beloved, he lifted her garter with lightning speed, not paying attention to the crowd, and tied it around his own knee, while saying the legendary phrase: “Shame on anyone who thinks badly about it!”

From that moment on, it was the women's garter that became the embodiment of sexuality and eroticism, which attracted men and had a special magnetism. Modern garters have certainly lost this deep meaning. Newlyweds often enter into intimate relationships even before the wedding. However, it is the playful wedding garter on the bride’s leg that conceals a premonition of the first wedding night - that exciting moment, when the newlyweds awaken a new sensuality and intimacy.

History of the wedding garter

The bridal garter has been firmly established in the list of wedding accessories since the 16th century. At that time, any element of the newlyweds’ clothing was considered lucky, and many guests tried to tear off a piece of the dress or ask the bride or groom for some small accessory as a lasting memory. Thanks to this accessory, guests wanted to become happier or get the love they so desired. In order not to tear the festive outfits of the bride and groom to shreds, it was invented to throw special, special items of clothing to the guests. The symbolic wedding garter became just such an element.

In addition, there was an interesting tradition until the 19th century. After the wedding ceremony, the boys and girls ran to the bride's house in a race - whoever ran first received the right to remove the garter from the bride's leg independently and subsequently tied it around his knee. It was believed that this lucky amulet would protect him sincere love to your beloved and protect against infidelity or betrayal. Later, the right to remove the garter passed exclusively to the groom.

Modern brides are increasingly asking the question: which garter should they choose for their own wedding? What is the nuance of choosing a wedding garter? What exactly should this accessory look like or not look like? The answer is quite simple.

1. First, you should decide on the color of the wedding garter. Often this accessory symbolizes the virginity and frequency of the bride’s thoughts, so you should avoid bright colors and prefer delicate creamy, pastel shades. The most popular are cream, champagne, as well as blue and blue. This is due to the fact that in the biblical scriptures blue and light blue were a symbol of purity, fidelity and innocence.
2. Secondly, the bride should decide whether she will wear two garters or just one symbolic one. If the newlyweds have made up their minds and decided to wear two garters (one of which the groom throws to the guests, and the second garter that will remain on the bride’s legs until the wedding night), they must correspond to the same style. In order for the bride not to rack her brains over this, wedding salons often sell ready-made sets of two garters - one of them, wider and more massive, is the “lucky” garter that is thrown to guests, and the second is thinner, miniature and delicate - “honey”, which the newlyweds will take off on their wedding night itself.

Wedding stylists advise choosing the style and material for a wedding garter in accordance with the style of the wedding dress and accessories. Fortunately, modern manufacturers of wedding garters offer a wide range of these products from lace, organza, tulle, silk, etc. Or they can be combined with the chosen wedding style.

And in conclusion, I would like to summarize - a wedding garter is an intimate accessory that symbolizes the passion, and, at the same time, the purity of the bride’s thoughts. That is why the bride should not boast about the fact that she is wearing a wedding garter, show it off to the public once again and, especially, choose vulgar or too pretentious wedding headbands - all this is considered bad form.

If the bride is too modest to adhere to the ritual when the groom independently removes this garter from her in public (he often does this with his teeth), there is a more democratic option - when the bride independently removes the garter and gives it to the groom. In addition, there are couples who, out of embarrassment, do not focus attention on this tradition, and the groom, in the midst of the wedding, independently takes a garter out of his pocket, arguing that he took it off while the guests were distracted by dancing or eating, supposedly unable to withstand the tension and not waiting the right moment.

It should be remembered that a wedding garter is just an accessory that will give your wedding celebration even more individuality, and will also give you the opportunity to once again attract the attention of your guests, doing it in a very eccentric, original and pretentious way.

A wedding garter on the leg is an attribute without which it is impossible to imagine a modern bride. In this article you will find out where the tradition of wearing this element came from, what function it served before and what it does now; signs associated with a garter, as well as how to wear and remove it correctly.

The garter is a thin elastic fabric strip decorated with lace, ribbons and rhinestones. Most often done in light colors.

In past centuries, this detail of a woman's wardrobe performed an important function - it held the stockings, thereby preventing them from sliding down. Today, this accessory is purely decorative, and brides wear it only to maintain traditions.

Modern brides use this accessory for at least three purposes:

• Creating an image. This element will be the final touch to the bride’s ideal look. A garter will make a girl feel feminine and sexy.
• Surprise for your loved one. This piquant detail will not leave your groom indifferent and will pleasantly surprise him.
• Good memories. You can keep the bride's headband as a pleasant memory of a wonderful day. In addition, you can make this thing traditional in your family, passing it on from generation to generation of brides.

In addition to these decorative items, the garter can become part of a funny custom when the groom removes the accessory from the bride’s leg and, standing with his back to the single guests, throws the garter. The bride has the same ritual - throwing a bouquet to her unmarried bridesmaids. Whoever catches it is destined to get married within a year (as tradition says).

How to wear a garter

The bride should spend at least half of the day wearing this element. Therefore, the garter should be comfortable and not interfere with the girl. Usually the garter is put on the right leg, however, this does not carry any superstitions. Most likely it's just a tradition. Therefore, wear this item on the leg that is more comfortable for you.

It is best to wear it 10 cm above the knee. This way you will kill several birds with one stone:

• There will be no discomfort when moving, because... this is the thinnest part of the leg. Accordingly, the leg is not pinched, due to which blood circulation is not disrupted.
• Convenient location for a photo shoot. Nowadays, many brides take pictures so that the garter is visible. When the accessory is located just above the knee, you will not have to lift your dress high.
• If you decide to follow the tradition and throw a garter to the guests, then the groom will not have to look for it for long (especially if the dress is long and fluffy. This way you can avoid various incidents and save time.

IMPORTANT! In the West, the bride wears two garters. Lower, « happy”, serves so that the groom throws it to the guests, and the second, « honey" or « sweet” remains for the newlyweds as a good memory. Our newlyweds can take note of this interesting tradition.

Types of garters

When choosing this wedding detail, the bride’s eyes will run wild from the variety of types and colors. The garter should be neat and attractive. If you decide to wear two accessories, then the garter that the groom will remove from your leg during the celebration should be wider and more magnificent than « honey" You can choose a beautifully decorated garter, but not too fussy. This detail should remind you of the image of a gentle bride, so give preference to a snow-white or blue shade (traditionally they mean purity and innocence).

It is not necessary to choose a garter to match the style of your dress. But if the shades match, it will create a more harmonious image.

Signs about throwing

The tradition of taking a small piece of fabric from the bride’s wedding dress originated in the Middle Ages. The guests believed that this would bring happiness. But such customs threatened the bride to be left without a dress at all, because everyone wanted to snatch a piece of happiness. That's why a special garter was invented, which the groom threw to the guests. Today this tradition is widespread in Western countries. Our newlyweds also adopted this interesting fun.

It is not customary to give a garter into the hands of any of the guests (the sign says that the person who acquires the accessory in this way will have power over the bride).

Another superstition: if the groom throws the guests « honey garter instead « happy”, the marriage will not last long. The loss of this garter promises loss of fidelity to the spouse.

To throw or not to throw

Of course, almost all newlyweds now perform this ritual. Everything will depend on the style of the wedding, on the wishes of the newlyweds and guests. If everyone invited is married, married or just in a relationship, then there is no point in throwing a garter. It will look awkward and may offend guests. In addition, if you yourself do not want to perform this ritual at your own wedding, you do not need to force yourself for the sake of tradition. This is your holiday!

How to remove and throw a garter

This ritual should be performed only after the bride has thrown her bouquet to her bridesmaids.

It is better for the newlyweds to agree on which leg and at what height the garter will be worn in advance. Rehearse several times at home so that everything goes smoothly at the most crucial moment.

Take care of the musical accompaniment of this process. Romantic music will create an intimate atmosphere, while more playful music will add fun to the event.

The groom must carry the bride in his arms to the center of the hall, then carefully lift the hem of the dress and easily remove the garter with his hands (some do this with their teeth, but there is no tradition behind this action. It’s just a fun element). To make it easier to remove the garter, the bride can place her foot on a chair or sit on it. The groom then turns his back to the guests and throws the garter at random towards the crowd. The one who caught it, according to legend, should find his soul mate in the next 12 months.

« The newlyweds remove the sweet garter when they are alone with their beloved. This is an intimate moment that should happen on your wedding night.

Where to buy

Bridal salons and lingerie boutiques are the most common places where a bride can choose a garter for herself.

The cost of this product will depend on the material (natural or artificial), brand, prestige of the salon and decoration of the garter itself. Thus, the price of an accessory can start from 500 rubles. and reach several thousand rubles.

You can also sew this part yourself.

Making your own garter

There is nothing complicated here. To make a garter you will need:

• lace fabric;
• satin fabric;
• rubber;
• beads, rhinestones (any decorations that you like);
• scissors and glue.

To cut the desired piece of elastic and lace fabric, measure the circumference of your thigh where you plan to place the garter. Then cut the required length of the material, adding 0.5-1 cm on each side for an allowance. Cut a little more lace material to create a graceful ruffle.

After this, stitch the lace and elastic (for assembly, the elastic must be kept taut at all times).

Now you can decorate the accessory to your liking.

The bride's garter is a beautiful and seductive element with interesting traditions and funny rituals associated with it. Whether to wear this detail to your own celebration or not to follow customs is up to you to choose.