How to make a paper box craft. How to make a box out of paper? How to make a cardboard jewelry box

Simple origami that only requires a simple piece of paper and nothing else! Even children can make such a box, so together with them you can decorate your home with simple and beautiful things.

How to make a box from a sheet of paper with your own hands?

There are many different ways, we will introduce you to some of the simplest and most convenient ones.

First way. How to make a simple box?

For this method we need a piece of paper. It is better to take thick paper, or even cardboard, so the box will be more stable.

1. We make markings on the sheet. It should be divided into 9 rectangular parts.

2. Using scissors, we make cuts in the right places (see photo).

3. We make folds along all the drawn lines and fold the box.

Second way. How to make a square box with a lid?

To make such a beautiful box, we will have to put in more effort.

1. First of all we need to make a template. It can be printed on a computer or drawn on paper by hand. We’ll immediately think about the size, what paper we’ll draw on and other issues.

SCHEME.

2. We cut out our shape and make cuts and folds according to the diagram. The dotted lines in the diagram indicate the place for folds, the places sketched with lines indicate the places for gluing. For gluing, prepare double-sided tape. If the paper is too thick, for better bending, you can make a creasing (applying a straight groove on a sheet of paper).

3. We apply double-sided tape to the gluing areas (see photo).

4. Before assembling the box, you can decorate it with different elements. Then you can glue it.

The box is ready!

Third way. How to make a box case?

In this case, it is also better to use thick paper or cardboard.

1. Print the box template or draw it by hand on a piece of paper.

SCHEME.

2. Cut out a piece of paper according to the template.

3 . Fold the workpiece in half and glue it with glue or tape.

4. We wrap the sides and our box is ready!

We can decorate it with different elements.

VIDEO. How to make a box from a sheet of paper at home?

We all love gifts. Sometimes you want to give gifts made with your own hands. Or we need to make packaging for a purchased gift, and such packaging that it reflects our feelings. Most often, the gift is packaged in a box. So let's look at what boxes you can make. Consider rectangular and square boxes.

The simplest box

This box is without any special tricks. Without cover. Here is her diagram:

I must say that using the same pattern you can make boxes of different sizes. Therefore, the diagram indicated in centimeters can be enlarged. If you have a diagram, you can use it to make both a small and a large box. Depending on what size box you need. Looking at the diagram, we see that we must first draw a scaled view of the box to the required size.

If you need a dense box, then it’s better to make it made of cardboard. It will be stronger. You can even choose cardboard with colors. You can take white cardboard. The diagram shows the creation of a square box. Instead of a square one, you can make a rectangular one. To do this, you need to make changes to the proportions of length and width, to the proportions of the sides.

After careful drawing, carefully cut out the outer side of the drawing along the contour. Then we bend along the folds. We glue the edges for gluing. Consistently. Please note that the top of the box has folds on all sides. This is to ensure that the top is aesthetically pleasing and comfortable. We bend these bends. We glue it. All. The box is ready.

Boxes with finished lid

Here's the most simple circuit box like this:

If you need a small box, then it is better to make it from paper with a density of 80 or 120. If you need a larger container for the gift, then you need to choose a denser material. When drawing, pay attention to the proportions. If you need a square at the bottom and top, and a rectangle on the sides of the box, make the proportions as in this diagram. Drew it. Cut it out. Bent. Glued together.

If you need a box with a ready-made lid in the form of a cube, then this diagram will do:

A minimum of material is needed here. Everything is simple and functional. Drew it. Cut it out. Bent. Glued together. You can paste additional pictures on the box for design.

There is a sketch of a rectangular box, already with tricks.

Here the edges for gluing are beautifully beveled, and the outer sides and top with lid have eyes for fastening. Such containers for gifts can also be modified at your discretion. The same circuit can have many variations within its implementation.

Another diagram of a rectangular gift box:

Creating such a craft is a little more complicated than the previous ones. There are additional side slots. This increases the strength of the container. The lid has additional wings - sides, which are inserted inside the box. The wings are made with roundness, aesthetically pleasing. Naturally, the proportions of the box in width, height, and length can be changed. Do what you need to do.

Boxes with top and inserts

If we want to make a rectangular box with a top and inserts, then this one is best suited:

This box is good because, thanks to the additional wings on the sides (put inside during assembly), it becomes stronger when gluing. And the lid with side wings and a front lock with a side overlap enhances the effect of the strength of the box (in the diagram, the lid with the front lock is drawn on the right side).

There is also a box with a top and inserts along the bottom of the box. Everyone has seen these boxes. Here's the diagram:

Let us immediately indicate that everything that is at the bottom of the diagram relates to the assembly of the bottom of the box. All the curly lines along which the cut must be made were made for a reason. The four halves of the four sides of the bottom, connecting in the desired configuration, form a tight adhesion of the bottom without any glue. The glue is applied to the box in only one place.

This place is indicated on the very left edge of the diagram - a side strip for gluing. You don't need any more glue for this box. The upper side wings are needed to provide rigidity to the lid that is lowered from above. And the lid itself has an additional valve that fits inside the box.

Boxes with separate lid

The easiest way to create such a box is shown in this diagram:

The sides that are wider are slightly larger. So that they can be folded at the top and glued inside too, for rigidity and aesthetics. The lid for such a box is easy to make. Take the main size 3 millimeters larger. The rest: the width of the sidewalls is at your discretion. Glue the inserts on the sides. Dry the finished products.

Another way to make a box with a separate lid. More aesthetic. Moreover, the box is not only beautiful. It also gains strength. Here is her drawing:

It’s convenient to make such a box because it’s easy to maintain the proportions, no matter what size you stick to. It is easy to draw using a square as a basis. The side wings are also easy to make at any scale, making the cut angle to the middle of the side of the virtual outer square. By folding such already cut material, you will get a product where the wings for gluing converge at the top on both sides. This gives the product not only aesthetics, but also strength. The sketch shows how to create a product both cubic and rectangular.

The diagram does not show how to create a lid for such a box. Yes, you don’t need to draw it. And so it is clear. To create the lid you need to apply the same scheme. True, draw a square 2 - 3 mm larger.

Since the sidewalls of the lid will be significantly smaller than the base, the wings for gluing need to be simply beveled at a certain angle in order to connect the sidewalls. When creating a lid, it is not necessary to make the wings for gluing all the way to the middle, towards each other. It is enough to make the wings for gluing simply at an angle.

Also, for those who want to learn how to make boxes, I have two links to videos where you can see how it’s done:

Gift wrapping is a responsible matter, because even the most desirable thing, carelessly wrapped in newspaper or stuffed into a simple bag, will not make the impression that the giver expects.

Of course, buying gift wrapping is not a problem today. The stores will offer a wide variety of options: boxes, bags, etc. But all the same, standard packaging will not be able to convey the range of feelings that you want to invest in a gift.

Therefore, many are interested in how to make a gift box using scrap materials.

Decorating ready-made boxes

The easiest way is to decorate a finished box of a suitable size. This can be done in different ways. Used for decoration colored paper, bows, decorative flowers, beads, sequins, pieces of lace, elegant braid, etc.

You will need to decide for yourself how best to decorate the box, depending on the reason for the gift and the personality of the recipient. It is clear that if a gift is being made for a girl, you can use more decorative elements. And if this is a gift for a man, it is better to show restraint. If desired, you can use a photo of the person for whom the gift is intended to decorate the box.

When decorating, it is advisable to emphasize for what reason the gift is being given. For example, if this new year holidays, then use snowflakes, Christmas tree cones, tinsel, etc. in decoration.

Simple box

It is not always possible to find a ready-made box of the right size, so you can very easily fold a box from paper or cardboard.

Even a child can make the simplest version of the box; to make it you will need:

• cardboard (preferably colored);

• ruler;

• pencil;

• scissors;

• hole puncher;

• ribbon.

If you don’t have colored cardboard on hand, you can cover ordinary white cardboard with colored paper.

First of all, you need to draw a template on a sheet of cardboard:

• in the center of the sheet you need to draw a square, this will be the bottom of our box;

• now on each side of the square we draw four more squares of the same size as the first, we have a figure resembling a cross;

• Now we carefully round the upper corners of the four squares (except for the central one).

To get it straight, you should use a template or compass:

• the resulting template should be cut out and the side parts bent upward;

• in the upper part of each side part, holes should be punched with a hole punch;

• thread a ribbon through the holes and tie it with a bow.

You can decorate such a homemade box to your liking using rhinestones, beads, and ribbon bows. But using the technology described, it is worth making only a small box, since a large one will not hold its shape.

Square box

To make a rectangular, or rather square, box from colored paper with your own hands, you will have to tinker. Here is a description of the work sequence:

• take a square sheet of thin cardboard or colored paper;

• draw two lines diagonally with a pencil;

• bend one of the corners of the square so that the corner falls exactly at the point of intersection of the diagonal lines;

• a second time we bend the same edge of the cardboard square so that the edge of the fold falls on the diagonal line;

• We do the same with all the other corners of the square;

• as a result, we got a sheet divided into small squares by fold lines;

• draw a bottom contour in the center, consisting of four squares;

• Now make cuts from two opposite corners to the intended bottom.

Now we begin to fold the box, the assembly diagram is as follows:

• fold the square from the wide (uncut) sides with the corners towards the center;

• then raise the sides;

• fold the paper on the wide side, forming the two remaining sides of the box;

• Now we wrap the cut out parts of the square, finally forming a box.

If you need to make a lid for the resulting package, you need to make a slightly larger box in the same way. That is, at the first stage, make a square 3-5 mm larger than the first.

Once you master this technique, you can learn how to make boxes yourself. different shapes: in the form of a pyramid, cone, cylinder, etc.

Book-shaped box

Today, instead of a material gift, the hero of the occasion is often given money; a box made in the shape of a book is very suitable for a monetary gift. Let's look at how it can be done:

• first of all, you need to make a rectangular box of the required size from cardboard; it is important that the bills that you plan to give fit freely into it;

• Now you should start assembling the “binding”. To do this, cut out two rectangular sheets of cardboard in length and width 1 cm larger than the manufactured box. You also need to cut out another strip, its length should be equal to the length of the sheets, and the width should be 0.5 cm greater than the height of the box made;

• we take the material from which we will make the binding, it can be plain or colored paper, thick fabric (for example, denim) or artificial leather;

• We lay out the blanks on the material, placing a narrow strip between two cardboard sheets. The gaps between the parts are 2 mm, a three-centimeter allowance is left at the edges;

• glue the cardboard to the material and cut out the blank along the marked lines, cutting off the corners;

• now we need to wrap up the allowances and glue them to the cardboard, we have a semblance of a book binding;

• We glue the previously made box onto one of the inner surfaces of the binding;

• We glue ribbons in the center of the top and bottom “lids”, with the help of which our box will be closed.

Now all that remains is to decorate the top part of our book box. You can decorate it with flowers and bows, beads and sparkles. The exclusive box is ready.

Of course, you will have to tinker with making gift wrapping. Perhaps not everything will work out the first time, but with a little practice, you will be able to make unique packaging that will not be found anywhere else.

Content

It is believed that every gift should contain a piece of the soul of the one who presents it. This can be a gift that is completely made with your own hands or ready-made (bought in a store), but decorated with your own hands. Today we invite you to go through master classes that will help us create a beautiful box with your own hands from cardboard with a lid. In such packaging you can give almost any gift, even the heaviest one. It all depends on how carefully you think through everything during the preparation stage.

In almost all cases, you will need a template. It is more convenient and easier to work with, and the box itself will turn out smooth. What other tools and materials may be required:

• corrugated cardboard;
• thin colored cardboard;
• scissors;
• PVA glue;
• laces, ribbons, ribbons;
• stationery knife;
• ruler;
• a simple pencil;
• a pen that no longer writes;
• tape (double-sided tape will also be needed);
• any decor to decorate the box.

These are general tips for working on packaging; they will also be useful to you in creating other crafts:

• try to make a box first from plain paper, and only then, when you get the hang of it, you can take on the main material;
• To carefully bend thick cardboard, use a pen that no longer writes. Use a rod to go over the folds and then they will turn out even;
• think in advance what the lid will be like - in the form of a valve (it will be part of the box itself) or a separate one that will cover the box;
• take care of the material when you already know what you will give. If the gift is heavy, then it is better to choose thick corrugated cardboard, and if it is light, then you can take ordinary colored cardboard;
• to decorate the box, it is better to use hot glue - it will dry faster and ensure reliable fastening of the decor;
• For work, give yourself a spacious table in a ventilated room. Don't neglect the light - you shouldn't strain your eyes to see small details;
• It’s quite convenient to work with cardboard, but you need to do it on a hard, flat surface so that the product turns out smooth and neat.

Box with lid

Well? Let's proceed directly to creating the box? To get started, we suggest choosing one of several templates. There are options with a hinged lid and a lid that will separately cover the box.

Each of these box options is interesting. For example, a narrow box is more suitable for watches, gloves, books, a tie, jewelry, and a voluminous wide box is more suitable for toys, vases, tableware and other gifts.

So, first you need to transfer the pattern to the main material and cut it out. Now you need to carefully bend the box along the dotted lines (use a creasing tool).

Use double-sided tape or PVA glue (or any other glue) to join the box pieces together.

Now all that remains is to decorate the box, for example, using regular postage stamps or any other decor that will match the theme of the gift.

Round box

To create a round box you need to use a compass. You will need four circles of regular thin cardboard and two circles of thick cardboard. In addition, you will need one strip that will serve as the walls, one for the lid, and one strip should be a centimeter narrower than the strip for the walls. Visually it looks like this:

Now you need to cover the corrugated cardboard circles with regular cardboard circles so that you get a beautiful and neat bottom of the box, as well as a lid.

Now you need to glue the wall of the box with the strip, which you made 1 cm narrower. It should look something like this:

After this, you can begin assembling a cardboard gift box.

A similar action must be done with the lid. Already at this stage the box can be decorated. Use ribbons, decorative prints, stamps, beads, dried flowers and other elements. Usually a round box is used to give a gift to women. The gift looks very romantic and touching in such packaging.

How to make a box with your own hands from cardboard without a drop of glue

This is a very convenient option because you don’t need to fuss with glue and wait for it to dry. All you need is material, scissors and a template. Since we have made a gift box for a woman, let’s make a simple cardboard box for a man.

All you have to do is print the template, transfer it to cardboard and cut it out. Now bend the box along the dotted lines and try to create a box like this:

Special valves allow you to close the box tightly and conveniently carry the gift.

The following option is more suitable for sweets, jewelry, a small figurine and other small gift.

Another option, but it’s more like a cardboard gift bag in which you can present a small souvenir. The packaging is also created without a single drop of glue, and all because of the well-thought-out design.

We really like the following version of a small cardboard chest, which is suitable for decorating a souvenir for wedding guests or for presenting jewelry. Use a utility knife to make the cut. And in this case it is better to choose thin, beautiful cardboard.

Here's what your cardboard box will look like:

DIY box made of cardboard in the shape of a piece of cake

Believe me, it looks simply amazing. You can create one piece to give a touching gift or create an entire cake from pieces that will be decorated in different ways. To get started, you definitely need to get a template:

Use thin cardboard, then the product will turn out elegant and will be more convenient to work with.

The cake without decorations looks something like this:

For decoration, you can use a variety of techniques: decoupage, paper flowers, quilling, pieces can be painted with paints or felt-tip pens.

Today I’ll tell you how you can make a beautiful gift box with your own hands.
There are quite a few master classes on this topic on the Internet, but I don’t think I’ve ever seen my version, but it’s very convenient and the box is thick even from thin paper.

To work you will need:

3 sheets of cardstock measuring 30x30 cm each,
1.5 meters of tape of the desired color and width,
Double-sided tape,
Glue Moment Crystal or Joiner,
Scissors,
Paper cutting knife,
Creasing stick, if available - scoring board,
Ruler,
Pencil.

Working hours:

When your hand is “stuffed”, it takes about 30 minutes FROM and TO the box. But if you don’t have certain skills, making a box can take several hours.

Paper selection:

To make such a box, I recommend choosing cardstock with a density of 200 to 270 g/m2 - this is the optimal density at which it will be comfortable to work with paper. Thicker paper may break and be too rigid and clumsy, while paper that is too thin will not be able to provide the required density to the box.

Description of work:

1. Determine the size

Before starting work, you need to decide on the size of the box - it is important to know its length, width and height. After this, the paper size is calculated.
For the bottom of the box, the paper size should be as follows:
2 cm + box height + box height + length + height + height + 2 cm = length of a sheet of paper
2 cm + box height + box height + width + height + height + 2 cm = width of a sheet of paper

For the top of the box, the paper size should be as follows:
2 cm + (box height - 1 cm) + (box height - 1 cm) + (length + 0.5 cm) + (box height - 1 cm) + (box height - 1 cm) + 2 cm = length of a sheet of paper
2 cm + (box height - 1 cm) + (box height - 1 cm) + (width + 0.5 cm) + (box height - 1 cm) + (box height - 1 cm) + 2 cm = width of a sheet of paper

If the box is square, then measuring one side is enough.
For my box, I chose a size of 10x10 cm with a height of 4 cm. A sheet of cardstock measuring 30x30 cm would suit me.

2. Making the bottom part

We take a beautiful turquoise cardstock and line it according to the diagram and our calculations:

It turns out this is the preparation

This is what the workpiece will look like after the cuts. I make the cuts “by eye”, cutting out very small pieces, only so that later I can “plant” the sides correctly.

And this is a workpiece already with bigs (the reverse side is shown for clarity). Bigs can be made with a scoring stick. If you have a scoring board - just great, the folds will be perfect and the paper will not break.

The next step is to fold the sides. We bend according to the pattern, first inward 1 and 2, then bend outward 3.

You should end up with something like an accordion on each side:

The “extra” valve tails need to be bent as in the photo - inward.

The description is quite complex and may seem confusing, but it is better to try to make a blank using the diagrams and photos - you will immediately see where the cuts and folds should be.
As a result, you should get something like this:

Now we apply a little glue to the short sides, hide the valves inside and, as it were, “cover” the top with the glued part. We press the side panel tightly on both sides and wait a little for the glue to set.

The bottom part of the box should look like this.

There is just a little bit left - you need to cut and glue the bottom. We make the size of the bottom 3 mm smaller on each side than the size of the bottom of the box base. For example, if we calculated the base to be 10x10 cm, then we cut out the bottom measuring 9.7x9.7 cm.

Apply glue to the bottom of the box inside and carefully place the cut out bottom on top. Press with your fingers - the bottom of the box is ready!

3. Making the top part

We do the upper part similarly to the lower one, only the calculations will be slightly different.

For the top of my box the paper size should be like this:

Please note that the height of the top of the box has decreased by 1 cm, and the length and width have increased by 0.5 cm. Half a centimeter is the necessary margin for a comfortable fit of the lid, and the shortened height is for convenient opening of the box.

We make markings on a sheet of 30x30 cm:

After marking, we cut off all excess (marked in red in the photo):

We cut out the bottom, 3 mm smaller than the bottom of the base, in our case it is 10.2x10.2 cm. But we don’t glue it right away, we can only try it on for now.

Now you need to prepare the tapes. Cut 1 ribbon 30 cm long, 2 ribbons approximately 50-60 cm long each. The ribbons must be carefully ironed to ensure they look perfect.

We glue small pieces of double-sided tape to 4 sides of the inside of the lid to secure the tapes.

Carefully glue the edge of the tape first to the bottom of the lid, then to the side.

We wrap the tape around the outer part of the lid and also glue it on the other side inside:

In this case, it is important to monitor the direction of the tape so that there are no distortions, and you also need to ensure its uniform tension so that the tape does not dangle.

Now we glue two pieces of tape on the free sides of the lid. Glue only one end of each segment, leaving the other end free.

Carefully apply glue to the bottom and edges of the ribbons. I deliberately do not apply the glue too close to the sides, so that when gluing the bottom it does not crawl out.

Carefully glue the bottom.

The lid of the box is almost ready, all that remains is to tie a beautiful bow:

The excess length of the ribbon on the bow needs to be cut off, the edges can be processed with a lighter - an almost imperceptible scar will form and the ribbon will not crumble.

All! The box is ready and you can pack the gift!