Knitting socks diagrams and description. Knitted socks, knee socks, leg warmers. Colored fishnet socks

The first knee-high socks were long socks or short knee-length stockings. They played sports in these socks. Later, knee socks began to come into fashion, and many interesting models began to appear, including longer than traditional ones - up to the middle of the thigh. And in addition to the sporty style, knee socks have penetrated into romantic images and casual style. In this material we will talk about how to knit knee socks using knitting needles in a selection of master classes with diagrams and a description of the work.

Learn how to knit knee socks step by step with diagrams and descriptions

• L/p. - front loop
• I/n. – purl loop
• Kr/p. – edge loop
• P. - loop

This model is quite simple to implement and is suitable for beginners. Sizes: 36-37 (38-39).

• Yarn – 100 g turquoise and 100 g colored sectional dyeing (in 4 folds).
• Knitting needles No. 2.5

The main pattern is knitted according to the pattern: For the first circular row - * 1 l/p., slip 1 p. with double crochet as i/p., then repeat from *. For the second row - 1 l/p., 1 p. with double crochet as i/p. and so on. Alternate rows 1 and 2.

Front stitch - alternating rows of l/p and i/p. In circular rows only l/p.

We change the yarn every 4 rows.

We cast on 80 stitches on stocking needles, distribute them onto 4 knitting needles (20 pieces each) and close them in a circle. We knit 6 cm of the main pattern.

We knit the upper part of the shin using stockinette stitch, alternating turquoise and colored stripes. Every 6 rows we decrease 20 times in one loop (along the middle line at the back). For decreases, alternately knit the first 2 stitches of the 1st knitting needle together. and the last 2 sts of the 4th knitting needle together with a tilt to the left (= 1 st, remove like a l/p, 1 l/p is pulled through the removed st). 60 p. left.

Having knitted 140 rows (32 cm), we knit a straight heel with turquoise thread (as when knitting socks).

After this we move on to the foot. We knit all the loops in stockinette stitch and, as before, alternate the stripes. We decrease the loops to lift the foot until 60 remain. Foot length – 19 (20.5) cm.

We knit the toe with turquoise yarn. On the 1st and 3rd knitting needles we knit the 4th and 3rd stitches at the 8th end of the knitting needle together with the knit stitch, and also on the 2nd and 4th knitting needles the 3rd and 1 4th stitches together with a tilt to the left. Golfs are ready!

This model is more complicated than the previous one, but looks very attractive. The openwork pattern in the form of a herringbone is suitable for those who are just starting to master openwork knitting. The finished work can be seen in the photo:

• Yarn – white (or another of your choice) – 200 g of mixed composition (wool and polyester).
• A little (about 20g) polyester yarn for the heel - gray in this example.
• Knitting needles - stocking needles No. 3.5.

The elastic is knitted like this: 2 l/p., 2 i/p. - alternate in the same way.

Front stitch - circular rows l/p.

Purl stitch – circular rows i/p.

We knit the openwork pattern according to the repeat pattern of 6 rows. In even rows - l/p. The pattern looks like this:

• We cast on 48 loops on the knitting needles and knit an openwork pattern (6 repeats horizontally). Vertically repeat the rapport 5 times. We redistribute the loops onto 3 knitting needles of 16, 15 and 17 pcs. We knit the first knitting needle in stockinette stitch, knitting the last loop twice (behind the front and back walls). Second needle – 3 l/p, 8 p. openwork pattern, 4l/p. Third – l/p. The result will be 49 p.
• Having knitted 97 rows (42 cm), we redistribute the stitches onto 4 knitting needles, 12, 9, 16 and 12. The first and fourth stitches will be in stockinette stitch. For the heel we add polyester yarn. The heel is knitted using the “boomerang” method, when in shortened rows, 1 stitch is not knitted on each side, yarn over on the right needle. There should be 10 stitches left. Then elongated rows are knitted - transfer 1 loop on each side to the right knitting needle, tightening the thread tightly.
• After knitting the heel, we move to the front stitch on all needles. After about 19-20 cm we begin to decrease. In the 1st row we subtract 3 stitches so that it remains. After 1 row at the end of knitting on the 1st and 3rd knitting needles we knit 2 stitches together like l/p. On the 2nd and 4th knitting needles, at the beginning we knit 2 stitches with a broach (we remove 1 as l / p, we pull 1 through the one that was removed). We repeat the steps until 6 stitches remain. Decrease in each row until 8 stitches remain, we tighten them with a working thread.

Trying to knit simple knee socks for a girl: a diagram with a description of the work

This work shows white knee socks for girls, but you can also choose the color as desired.

The sizes of this model are 14-17. To work, you will need cotton yarn with the addition of lycra (2%), in total you need about 60 g. You also need a set of stocking needles No. 1.5.

The elastic is knitted according to the pattern 1 to 1 (alternating 1l/p and 1l/p). The main pattern here is also not complicated. You need to knit in a checkerboard pattern. In the diagram you will see only odd rows; even rows are knitted with knit stitches. Rapport 6 rows.

The diagram and description can be seen in this photo:

Finishing work on golf socks:

Video on the topic of the article

For those who want to analyze knitting in more detail and clearly and get new ideas for creativity, we have prepared a selection of video master classes on knitting knee socks:

How to knit tights?

(photos click to enlarge)

What kind of wool should I knit fishnet tights from? From any. But keep in mind that the finer the wool, the more visible the openwork pattern is, the more impressive it looks. The best yarn, of course, is 32/2, a skein of which costs 5 rubles (*). You need to take it in three folds; for tights, 2-4 hundred gram skeins are enough, depending on the size. You will also need size 2 knitting needles and a set of double needles.

(*) - my note:
In Soviet magazines it was customary to focus on 32/2 yarn. They still do it now. This is a fine yarn for machine knitting. When it is used in hand knitting, it is usually wound in several folds, from 2 to 8 threads, depending on the desired thickness. The density of one thin thread 32/2 corresponds to 1600 meters in 100 grams.

Before you start work, you need to take measurements (see figure).
Our calculations are given for sizes 46-48, here are their parameters: semi-circumference of the hips - 50 cm, circumference of the lower leg at the ankle level - 23 cm, side length from waist to ankle - 100 cm, length from waist to waist through the groin - 68 cm.

Now knit two control samples: stocking stitch and openwork pattern according to the pattern.

Calculate the knitting density from them. It should correspond to: for stocking fabric 26 loops for 42 rows = 10 by 10 cm, for openwork fabric 24 loops for 40 rows = 10 by 10 cm. If the density of your samples turns out to be different, the calculations will have to be adjusted.

We start working with the right half of the tights. We put 130 loops on the knitting needles (line A1A2 = 50 cm, see pattern) with an auxiliary thread and knit 4-6 rows in stocking stitch. We break the thread. We connect the main thread and, without changing the pattern, knit another 16 rows (elastic hem).

“Corner” (abc) is performed with partial knitting. In the work - half of the loops are on the back of the right side of the work (65 loops). The number of partial knitting techniques is determined by the number of edges in the segment ac: 8 rows, 4 edges. The number of loops in one step is thus 65 loops: 4 edge loops, that is, 16 loops (we will add the remaining one to the last part).

In the front row we knit 65 loops, turn the work inside out and knit the row to the end. In the next front row we do not knit 16 stitches until the middle, we turn the work inside out and knit the row to the end. We work like this until we knit the entire “corner”, finishing it with a common front row, there are 130 loops in the work.

Let's start calculating the fabric up to the dash line: line AB (see pattern) = semicircle of the hips, divided by 2 + 3-4 cm (allowance for step width), that is, 50: 2 + 3 = 28 cm. Since the hem is for the elastic is included in this segment and is already connected, we perform the calculation for the remaining 26 cm. Line BB (see pattern) = 110 rows. It is advisable to provide an allowance on the back half of the part (3-4 cm); it can also be knitted using partial knitting, namely: knit 12 rows exactly. Then we knit the first 65 stitches in the front row, turn the work wrong side out and knit the row to the end. Again we knit 12 rows exactly, then the first 65 loops, turn them inside out, and finish the row. And we work like this until we knit 110 rows. We mark the loops of the last, 110th row with colored thread, this will make it easier to sew in the gusset.

The segment BC (see pattern) is 26 rows, they are knitted evenly, we mark the edges of the last row with colored thread.

Let's move on to knitting the openwork fabric. In order for it to correspond to the width of the work, it is necessary to make a decrease: 130 loops of stocking fabric are equal to 120 loops of openwork, which means you need to decrease 10 loops - in purl row, knitting every 12th and 13th. loops together with one purl. After the auxiliary row, we knit with an openwork pattern of 66 cm, decreasing one loop at the beginning and end of every eighth (front) row. We knit the last 8 rows evenly, finishing the work with the front row. In order not to lose count, you can mark the rows in which decreases are made with a colored thread or pin.

The openwork part is ready. In the upper part of the canvas it had a width of 120 loops, in the lower part - in the last row - 56 loops. This number corresponds to the width of 60 loops of the stocking fabric, which we will use to knit the final part of the part - the sock. This means that when working, it will be necessary to add the missing 4 loops in the purl row at equal intervals. Now we transfer the work to 4 stocking needles and knit a sock. Before knitting the heel and toe, add another wool or elastic thread for strength.

We knit the left half of the tights in the same way as the right, but in a mirror image.

We knit the gusset like a rectangle, also adding an additional thread for strength. We put 16 loops on the knitting needles, knit 26 rows, close the loops of the last row. The basic work is completed. Let's start assembling.

Wet both halves in lukewarm water, gently wring out and let dry. The water itself will “iron” the knitted fabric. Baste the left and right pieces, then sew them together with a vertical knit stitch or crochet them. Lastly, sew in the gusset. Iron the edge of the fabric (the hem of the elastic) through two layers of cotton gauze. Fold the lapel along the fold and baste along the front side. Weave the auxiliary thread and close the open loops. Press the hem and all seams. Pull the elastic through.

Previously, knee socks were an integral part of a woman's wardrobe. And recently, tights and stockings have replaced them. But fashion is back! Knee socks have again gained popularity, especially among young women and girls. After all, they help create different images: from a hooligan-rebel to tender and romantic. We invite you to knit knee socks with knitting patterns and descriptions presented in this article.

Openwork white knee socks

The model is designed for size 37/38.

We will need:

• mixed yarn – cotton/acrylic (50g per 150m) – 100g;
• set of toe knitting needles. No. 2.

What patterns will we knit:

• elastic band: 2 knits x 2 purls;
• persons satin stitch: when knitting in the round, knit all stitches; when knitting straight - in faces. knit stitches, purlwise. R. – purl;
• openwork pattern: knit according to the pattern.

Knitting density: 20p. for 31r. correspond to a square of 10 cm by 10 cm.

Description

The principle of knitting knee socks is exactly the same as when knitting socks in the classic way. We start knitting knee socks with knitting needles from the top.

We dial 64p. and switch to circular knitting, distributing the loops over 4 knitting needles (16 pieces each). We knit 4 cm of elastic and start knitting the openwork pattern.

Having knitted 33 cm, we begin to knit the heel. We do this using the usual description of classic heel knitting for beginners. We work on half the loops (32 pcs.), i.e. on two knitting needles. We perform knitting with forward and reverse knitting. satin stitch 20 rub.

To round the heel, we divide all the loops (32 pcs.) into three parts: 11 sts + 10 sts. +11p.=32p. We continue to knit only the central 10 stitches, grabbing one loop from the outer parts in each row.

We knit these loops with the outer loops of the central part into one loop. As a result, we will only have 10 points of the central part left.

On the side parts of the heel we lift 10 stitches from the edges on each side. We put the previously set aside loops into work and again switch to circular knitting. Moreover, we knit the faces at the bottom of the product. satin stitch, and the top with an openwork pattern.

Having knitted it to the height of the little finger (it is advisable to try it on), we make decreases on the toe: on both sides we knit the outer loops on the knitting needles two at a time.

Moreover, at the beginning of the row it will simply be knitting two loops into one, and at the end - the so-called. broach: remove 1 p. as the front one, we knit 1 l. and stretch it through the removed st. For one row we decrease in this way 4 sts.

When on each sp. There will be 2 stitches left. We break the thread, thread it through the remaining loops, tighten it, and bring it out to the wrong side. side, fasten. Golfs are ready!

Knitted knee socks on two knitting needles without seam: video master class

Knee high socks with jacquard pattern

The model is designed for size 38.

We will need:

• h/w yarn of red and white colors – 100g each;
• h/w yarn of purple and gray colors – 50g each;
• set of double needles No. 3.5;
• marker (M).

What patterns will we knit:

• persons satin stitch: in circular knitting, all stitches are knit;
• patterns according to diagrams.

Knitting density: on jacquard pattern 25 loops correspond to 10 cm.

Description and diagrams for beginners

For convenience, the diagrams in the description are divided into two: harnesses and jacquard, which, in turn, is divided into several parts.

We cast on 60 stitches with a red thread and distribute it into 4 sp., put a marker and switch to circular knitting. Having knitted 8p. persons p., continue according to diagram No. 1, repeat the rapport 15 times per row, perform from the 2nd to the 6th row. and then repeat from the 3rd to the 6th row. 4 times. Following the river evenly add 8 stitches.

We get 68p. We continue knitting according to cx. No. 2:

1st p.: repeat rapport from 2p. for the entire row;

2p.: according to the scheme;

3p.: white yarn knits. P.;

4p.: white yarn knits. p., evenly adding 4 p. Total -72p.

We continue knitting according to cx. No. 2, starting from the 3rd day. Having knitted from the 4th to the 15th row, white. color knit 2p. Then 16 rubles. and 17 rub.

Change the color to red. and knit plaits according to cx. No. 1: 1r, from 2nd to 6th r. and from the 3rd to the 6th r., 1 r. persons P.

We continue along cx. No. 2: 1st r., 2nd r., from 18th to 32nd r. Two rubles persons loop white color. In the last r. decrease 8 sts evenly. 64 sts remain.

We work according to cx. No. 2: knit the 16th row, decreasing 4 stitches. , 17th r.

Change the color to red. and tie along cx. No. 1: from the 1st to the 6th r., from the 3rd to the 6th r. 3rd r.

Let's move on to cx. No. 2: 1 rub., 2 rub. In the last r. decrease evenly 4p. We have 56 p. Then knit from the 33rd to the 45th p.

Again we return to white: 2p. persons with a decrease of 4p. in the last r. We have 52p. Next - cx. No. 2: 16th r. and 17th r.

Red thread: 1p. persons., then: *1l. red, 1 l. gray* – repeat from * to * – for the entire row. Knit 7 such rows. Complete 1p. red

Heel design

The knitting principle is the same as the previous model. Red thread of faces Ch. knit 26r. by 26 p. We distribute them like this: 8p.+10p.+8p.=26p.

Having formed the heel, after decreasing we get 10 stitches on the knitting needle. Along the edges of the heel we raise 14 stitches. at both sides. We make one decrease: 2p. knit in 1 p. Taking all the loops into work, we get 63 stitches on the knitting needles. We knit them in a circle: on the 1st and 4th sp. persons Ch., on the 2nd and 3rd sp. jacquard pattern.

We make reductions:

1st: *2l. red, 1l. white* – from * to * repeat three times, ** 2l. red, white broach, 3 l. red, 1l. white** – from ** to ** repeat 7 times, ***3l. red, 2p. in 1l. white*** – repeat from *** to *** 5 times. Total 59p.

We continue to decrease until there are 2 rubles in each. there will be no 55p.

Foot

Continue: 1p. purple, 1 rub. white, from 49th r. to 61st r. according to cx. No. 2, 1r. white, 1 rub. purple, from 46th to 48th r. according to cx. No. 2.

We do: 1 rub. purple, 1 rub. red. Next r.: *2l. red, 1l. white* – repeat from * to * until the end of the r. Do this 3 more times.

Continue: decrease 7 p.: * 2 p. in 1l. red, 1l. white* – repeat from * to *. We have 47p. Having completed 4 p. according to the drawing, following. R. decrease 7p. We have 40p. Another 3 rubles. red

Toe

The first and last sts of each sp. we knit 2p. in 1p. We have 32p.

In 3 rubles repeat the series of decreases. After another 2 rubles. - a series of decreases. We have 16p.

In another 1 ruble. - a series of decreases. Break the thread, thread it through the remaining loops, pull it off, bring it to the wrong side and fasten.

If desired, you can roll on the top edge - see photo. To do this, we turn up the edge and crochet with a purple thread: a double crochet at the strand on the wrong side, *4 chain stitches, 1 double crochet between the strands on the front side*. Repeat from * to * for the entire row. The height of the roll is about 1 cm.

For the ties, make cords from thread in several folds. You can crochet a lace using air loops. Pull the lace through the holes - see photo. Tie knots at the ends of the cord.

Warm winter socks: video master class

Selection: knitted socks

Selection: knitted socks

With knitting needles you can knit socks, knee socks, fashionable leg warmers, slippers, slippers, boots, summer ugg boots and a bunch of other models. Needlewomen are constantly inventing interesting models and patterns for knitting socks.

Knitted socks with knitting needles in a spiral

MK from Elena Ostapenko, see CountryMAM .

Knitting socks in a spiral is easy and quick. They are knitted in the round with knitting needles. Beginner knitters can also handle this knitting method. Very convenient for children, because... The socks turn out to be virtually dimensionless. After washing, it is better to twist the socks in a spiral - then the pattern will not stretch.

MK how to knit socks on 5 knitting needles

We knit socks on five knitting needles. The number of loops when casting on is a multiple of four.

Depending on the density and quality of the threads, from 70 to 150 g of wool are consumed per pair

Gold socks from DROPS Design

Size: 35/37 - 38/40 - 41/43.

Foot length: 22 - 24 - 27 cm.

Length from top to heel: 40 - 42 - 44 cm.

Socks knitting description

Knitting pattern for socks:

Unusual women's socks with knitting needles “Ladybug” - knitting socks for beginners

Women's socks with 5 knitting needles. Photos and detailed descriptions will help beginning knitters cope with knitting this sock pattern.

Size: 38 (foot length 25 cm).

Yarn: Merino (Pechorka, 50% merino wool, 50% acrylic, 200 m/100 g)

Spokes: set of 5 double needles No. 4.5.

Watch the master class on knitting socks link .

Knitting socks for beginners

It turns out that it is quite simple to make slippers - footprints - from an ordinary rectangular piece. Look at Daryevna's forum master class on knitting leopards from Elena Gottlieb. You will learn how to knit cute socks using two knitting needles. Even beginner knitters can cope with this task.

Socks on two knitting needles are much easier to knit. We have a description on our website of how to knit children's socks from the Rabotnitsa magazine.

Knitting socks on knitting needles for beginners seems very difficult. Maybe you should try knitting socks on two knitting needles? Knitting socks on two knitting needles is much easier, there is only one thing: the socks will have a seam. In many countries, baby shoes and socks are knitted this way - on just two knitting needles. And it turns out very beautiful.Try it.

Knitted socks with two knitting needles

You will need: 150-200 grams of thread and knitting needles of a suitable size. Cast on 30 stitches on the needles. and knit furtheraccording to description.

Knitted socks with a star pattern

Foot size: 36-39. You will need: 50 g each of white and light gray yarn Permin Qual Navia Trio (100% wool. 120 m/50 g); set of double needles No. 3.5; hook number 3.

Knitted socks with geometric pattern

Socks knitted sizes: 35/37 - 38/40 - 41/43. Foot length: 22 - 24 - 27 cm.

To knit socks you will need: “Drops Karisma” yarn (100% wool, 100 m/50 g) from Garnstudio: 100-100-100 g lilac and 100-100-100 g natural white; double needles No. 3.5, double needles No. 3.

Diagram and description of knitted socks

Colored fishnet socks

Sock sizes: 30/31 (35/36).

You will need: 100 g melange yarn Fortissima Socka Mexiko Color (75% sheep wool, 25% polyamide, 420 m/100 g), set of double needles No. 2.5.

Knitting pattern for socks

Author of a master class on knitting socks with knitting needles Mama Belka. Mom Belka writes: “I want to show you how I knit Turkish socks. This is the only technique for knitting socks that I was taught. I like it because socks, which often wear out at the heel and toe, are very easy to restore by simply cutting off the heel or toe, putting on eyelets and bandaging a small area, instead of radically repairing the socks.”

Charming knitted socks from Drops Design

Sock sizes: 35/37 - 38/40 - 41/43.

Materials: 150 g of “Drops Karisma” yarn (100% fine wool, 100 m/50 g); stocking needles No. 3.5.

:

White socks called “Owls”.

White knitted socks called “Owls” from foreign craftswoman Julie Suchomel from Ravelry. A very warm model of socks with such a popular pattern, I hope you will like it too. Translation from a girl under the nickname Asyav.

Description, video and diagram of knitted socks .

Description and diagram of knitted socks

Description and diagram of knitted socks

All our socks and knee socks follow the same rules. Having studied these rules, you will quickly acquire the necessary skills and be able to move on to more complex patterns and even jacquard trim.

Rules for knitting socks and a table for casting on stitches.

Socks with knitting needles, knitting socks, knitting socks with knitting needles, pattern of socks with knitting needles, socks with knitting needles for beginners, socks with two knitting needles,

A good master class on how to knit socks video:

To knit openwork socks you will need Fingering Weight yarn and 2.5 mm knitting needles. (or any number). The main thing is to get into the desired knitting density: 30 stitches = 10 cm in stockinette stitch.

The work starts from the toe. First, cast on 24 loops: on each knitting needle you need to cast on 12 loops - for the sole and for the top. Next, follow the descriptions below. The pattern is knitted according to patterns A and B. Patterns are given in descriptions 3 and 4. Symbols in the patterns are described in description 1

DESCRIPTION 1, DESCRIPTION 2 , DESCRIPTION 3 , DESCRIPTION 4

Knitting socks video

Watch a short video tutorial on how to create beautiful and simple socks

The model is knitted with circular sock needles No. 3. First, cast on 76 stitches and knit with an elastic band 1*1 for 6 cm. Then use knitting needles No. 4 and knit as indicated in the description with a length of 30 cm. How to knit further, seeDESCRIPTION

The socks in the photo are knitted with Drops Alyaska threads in dark turquoise shade No. 52.

The shortened sock model is made of drops fabel yarn 75% wool and 25% plyamide. The work uses special stocking needles - 2.5 mm.

Socks are convenient to wear both at home and under shoes.

DESCRIPTION 1,

With the onset of winter and real cold, many people quickly begin to insulate themselves. Thick jackets, knitted hats, scarves and, of course, knee socks are used. After all, it is winter knee socks that do the best job of protecting women’s legs from the cold. Especially if their owner wore a short skirt instead of jeans or tight trousers.

In that step-by-step master class on knitting we will look at the question of how to knit a magnificent fashion model women's golf. The model will appeal not only to experienced people, but also to beginners in this business, who for the first time decided to try their hand at this important task like knitting warm knee socks.

In winter and early autumn, everything outside quickly freezes. Therefore, all fashionistas need to warm themselves, while abandoning beautiful shorts and fashionable skirts. If in cold times you do not intend to give up minis, you need to make bright knitted knee socks or children's socks. They will not only keep you warm during the cold season, but will also complement your style, making it more interesting, unusual and vibrant!

Link this original model Women's golf is quite simple. Even beginners in knitting will be able to do this task!

For work and knitting, you will need:

• Thick yarn made from wool or cotton.
• Five pieces of knitting needles.
• Sharp scissors.
• Hook
• Two schemes to work with.

Before you begin the manufacturing process of this product as described make a small sample to determine the knitting density. This will make the work process much easier for beginners.

Abbreviations used in the master class

To better understand the description of the master class, need to learn basic abbreviations.

• P. is a loop.
• Face is the front side.
• The inside is the wrong side.
• R. - row.
• Edge - edge loop.

Let's start our detailed master class with full description all actions and steps. For knitting we will use a pattern called “Speck”. It consists only of persons, p. To create a great piece that fits your feet, you first need to take measurements. It is necessary to measure the distance from the heel to the end of the shin, the length from the heel to the top of the fold and the width of your shin. The number of loops will depend on these measurements. But, it must be divided by four, since we will create knee socks on four knitting needles.

Description of the work process step by step with photos

In this detailed master class, we will cast on exactly 80 stitches onto the knitting needles. This number of loops must be distributed over four working knitting needles, so that each has twenty pieces. We cast on loops based on the measurements taken!

First we work according to the first scheme. We knit, depending on the size of the shin. Having reached the part where the product narrows, that is, knitting about ten centimeters.

According to the diagram, we remove the loops. Having completed the narrowing point, we knit again, using the pattern for beginners. Having completed the product to the heel, put the second and third knitting needles aside. We continue the process of the first and fourth.

We achieve the required height for the heel. We combine all the knitting needles. The most important thing you need to know is that the heel of knee socks wears out twice as fast as other areas of the product. Therefore it needs to be compacted. To do this, you need to make a heel according to the following pattern: chrome. remove the stitch, make one knit stitch and remove one loop, knit one and so on until the end of the row.

We knit a new row, that is, the wrong side of the item according to the description. n. We do not remove the loops. Using this easy description for beginners, we do the entire height of the heel. That is, about four or seven centimeters.

At this stage of the master class we need to divide all the loops between three knitting needles. If you can’t divide by three, drag a little more stitches onto the middle needle. We start knitting stitches from the center and one side. We make the final loop together with 1 stitch on the second side. We turn the thing over and continue working using the same scheme.

Gradually, the shape of the knitted heel will look like a voluminous box. According to the description, we decrease stitches until the loops on the side knitting needles run out. Once the heel is completed we will move on to creating the outsole.

On the side of women's socks we make additional loops from edge loops. When creating the upper side loops, we make decreases according to the second pattern. According to the same scheme, it is necessary to make part of the product up to the little finger. After this, the loops are closed: two pieces in each row.

To strengthen the finger part, it must be tied using the facial method. To prevent knitted knee socks from falling off while wearing, you need to tighten the elastic band with a hook.

Knitted knee socks are completed!

How to knit openwork knee socks?

Materials required for work:

• One hundred grams of cotton or acrylic yarn.
• Knitting needles number three.
• Set of double needles with number two.

Size 37-38 Knitting density: 20 p. x 31 r. = 10 x 10 cm

Description of work:

We start knitting with thicker knitting needles. Let's cast on 64 stitches and knit in a four cm circle with a 2 x 2 elastic band.

Then we move on to the main openwork pattern: about thirty cm from the first row, we transfer the knitting to four stocking needles No. 2 - 16 loops each. Now our product will become twice as narrow at the ankle. Having thus made fourteen rows, we begin to create the heel.

Leave half the stitches for a while and continue to work in stockinette stitch and on stitches with the first and fourth needles. Then you need to knit twenty rows in stockinette stitch. In the new row we sharply reduce the heel loops. To do this, we divide the loops into three pieces (32 = 11+10+11): the side parts are eleven loops each, the center is ten loops each. We create loops in the center, and slowly decrease the loops on the side.

We complete each row by knitting together the final center loop (10th) and the first side loop. When there are ten pieces on the knitting needle, we complete the creation of the heel. On the knitting needle, where we have ten pieces, we cast on ten more edge loops. After this, we knit loops in an openwork pattern on the removed 2nd and 3rd knitting needles. Next, we pull out the edge loops along the second edge of the heel onto the knitting needle. We place the loops on four knitting needles. We continue to work on four knitting needles.

Having reached the little finger, we begin to create decreases in every second row. To do this, on the 2nd and 4th knitting needles at the beginning of the row we make two loops together, and on the first and third needles we create broaches at the end of the row. When there are five loops left on all knitting needles, we create decreases in each row. And after a few rows we close and sew the last loops. For more detailed information, you can clearly watch video lessons with knitting patterns for women.