Christmas tree craft made of tinsel and sweets. Do-it-yourself candy tree step by step photo. Do-it-yourself Christmas tree made of sweets and improvised materials: photo

Content

Christmas tree from sweets, made by hand, is good gift for friends and relatives. Such a craft can become a real decoration of a festive table or replace a forest beauty. To make a Christmas tree from sweets for the New Year, any sweets, improvised materials that a person has are suitable: tinsel, ribbons, toys.

How to make a candy tree

Any person can make an original Christmas tree. Photos, detailed diagrams, master classes for making such crafts are available on the Internet. As a rule, delicious chocolates are often used to create a Christmas tree with your own hands. At the same time, it is better that sweets be in wrappers of gold, green, red. For the Christmas tree, you can use: marmalade, truffles, lollipops or jelly dragees without packaging.

If you need a Christmas tree as a gift for an adult, you can take a bottle of champagne or any other alcoholic drink as a basis. As a rule, sweet crafts are given to children. In addition to sweets, festive tinsel, bright satin ribbons, painted nuts, cones, Christmas decorations, paper or drawing paper, finished frame, beads on a string, adhesive tape, glue, etc.

Christmas tree of champagne and sweets

If a Christmas tree from a bottle of champagne is prepared as decorative ornament table, it is better to use an empty container. As a rule, in this case it will be easier and more convenient to work with it. To make a creative gift for the New Year, you need to purchase a full bottle of sparkling drink. Necessary materials for crafts:

• 1.5 kg of chocolates in gold, green, red wrappers;
• a bottle of champagne;
• scotch;
• LED strip for decoration;
• scissors.

Step-by-step instruction:

1. Divide all the sweets by color: first green, then gold and red.
2. Pre-glue pieces of tape to each candy.
3. Also, using adhesive tape, glue sweets to the bottle, starting from the bottom and moving towards the neck.
4. Make sure that one end of the candy touches the end of the next one.
5. Glue each next row a little higher than the previous one so that the candies lean on each other. The tree will look more magnificent this way.
6. There should not be more than 4 candies on the top of the bottle.
7. Decorate the top with a bow or star.
8. Pull a bright festive ribbon down from the top of the tree.

From tinsel

by the most simple option A handmade sweet Christmas tree is considered to be a handicraft, where sweets are combined with New Year's tinsel. For its manufacture you will need:

• a thick sheet of paper or cardboard;
• 1 kg of sweets in a golden wrapper;
• PVA glue;
• Double-sided tape;
• green tinsel;
• scissors;
• beads on a string;
• regular tape.

Instruction:

1. Cut out a part of a circle from cardboard or a thick sheet of paper, twist it so that you get a cone. Secure with glue or double-sided tape.
2. A ready-made cone layout, for example, from foam, can be purchased at the store.
3. Using simple tape, glue candies to the cone, while leaving small gaps between rows for tinsel.
4. Cut strips of double-sided tape and stick them in between the rows of sweets.
5. Start gluing the tinsel to the stripes.
6. Glue 4 sweets on the top of the cone and wrap them with tinsel.
7. Additionally, you can make your own jewelry from beads, sequins, Christmas tree branches.

From soft candies

christmas tree self made made from soft gelatin sweets is a great gift option for small children. At the same time, such a craft can be easily cut into several parts if there is more than one child in the house.

To make a sweet Christmas tree you will need:

• foam cone;
• 2 kg of jelly dragees of different colors;
• toothpicks.

Step-by-step instruction:

1. A ready-made cone can be purchased at the store or you can use a homemade one.
2. Use toothpicks to attach the jelly beans to the cone.
3. It is not necessary to take the whole toothpick, it can be broken into two parts.
4. Stick one end of the toothpick into the dragee and the other end into the cone.
5. Fill the Christmas tree with candy.
6. Instead of toys, chocolate edible pebbles can be used as a Christmas tree decoration, and caramel, melted chocolate can be used as tinsel.
7. The only disadvantage of such a Christmas tree is a short shelf life. A tree as a dessert is better to eat on New Year's Eve.

From lollipops

Christmas tree of lollipops in the shape of a stick - original craft to decorate the festive table for the New Year. This craft is easy to do with your child at home. For its manufacture you will need:

• 1.5 kg of lollipops (for example, lollipops);
• foam cone;
• any design elements (dried branches, cinnamon, orange peels);
• PVA glue;
• small pot;
• double sided tape or hot glue.

Instruction:

1. Use double-sided tape or hot glue to glue the cone to the pot.
2. Once the glue is dry, start decorating the frame with lollipops.
3. Insert sweets into the cone in a circle, gradually moving towards the crown.
4. You can make a three-dimensional star with your own hands and cover it with LED foil. It is easy to fix the decoration with a glue gun.
5. Such a sweet handmade Christmas tree can stand at least the whole year.

Video

Description

Candy Christmas tree- This is a creative way to serve various sweets to the festive table. Such a delicious Christmas tree can be presented to kids, friends, or to surprise work colleagues with it.

As everyone knows, the main symbol of the New Year is the Christmas tree, and the holiday itself does not pass without chocolates and sweets. Therefore, why not combine these two symbols and make a luxurious and elegant Christmas tree from sweets with your own hands?

Sweets for such a Christmas tree are best taken in a wrapper made of gold or silver foil.: so the New Year's beauty will look chic and very elegant. Making your own candy tree is pretty easy. It is only necessary to acquire all the necessary tools that we will need to create a Christmas tree: double-sided thin tape, glue, thick cardboard, tinsel and other Christmas tree decorations. Prepare a multi-colored rain with which you usually decorate a Christmas tree. Beads, which are now increasingly decorating Christmas trees and decorating rooms on the eve of the New Year, will look great. To decorate a Christmas tree from sweets, you can also take various decorative elements: bows, stars or small New Year's toys.

Such a Christmas tree will give a lot of positive emotions to your friends and family. It can be an alternative to the usual forest pine or spruce. Indeed, many refuse to install natural or artificial Christmas trees in their homes, since it takes a lot of time to decorate and then dismantle them. And such a Christmas tree made of sweets, made with your own hands, will create a New Year's mood, and will be a very cute symbol of the upcoming holiday.

So, stock up on various sweets, lollipops, marmalade and start creating a delicious New Year's masterpiece. How to decorate a Christmas tree with sweets and what to use as a base, our step-by-step recipe will tell you. It does not miss even the smallest details, since each stage is accompanied by a photo.

You can involve your kids in creating a sweet Christmas tree. Believe me, it will be very interesting for them to decorate her with chocolates, because they can be eaten at any time until mom turns away.

Ingredients

Cooking steps

Take a piece of thick cardboard and cut out the blank in the shape of a semicircle, as shown in the photo. Carefully roll the cardboard into a cone and seal the edges with glue. Wait for the cardboard to dry completely, otherwise, in the process of “decorating” the Christmas tree, it may unstick under the weight of sweets.



Prepare pieces of thin double-sided tape. There should be as many of them as you decide to put on the Christmas tree of candies. Glue tape to the center of each candy. Determine for yourself how the candy will stay on the Christmas tree so that it looks as bright as possible - and stick strips of adhesive tape on the side of its attachment to the cardboard.



After all the sweets are prepared, proceed to decorate the New Year's beauty. Start with the base of the cone. Gradually, row by row, “seat” sweets in a circle, moving up.



As a top, you can use stars or glue the most beautiful candy.



Now you can decorate our Christmas tree made of sweets with rain, beads, sequins. In some places, you can add a few small Christmas decorations. If you have small lanterns, you can put them on the Christmas tree.



In conclusion, you can add bows to the Christmas tree from sweets. They are very easy to make yourself. It is necessary to take several wide ribbons of any color and several narrow golden ribbons. Tie a small compact bow from wide ribbons, gently straightening it. In the meantime, make a small gold ribbon bow. It can be glued or sewn to the main one. Now the finished bow can be solemnly seated on top of the Christmas tree.



You can add a few sprigs of natural spruce in some places of your chocolate beauty - and she will look very natural and natural. Now your candy tree is ready! Place snowmen, Santa Claus and other New Year characters next to her. You will remember this New Year for a long time, because the festive table will be decorated with a designer Christmas tree made of sweets! Happy holidays to you!



Bon appetit!

An article about how to quickly and unusually make a Christmas tree with your own hands. This craft will be a great decoration for your home or a gift for your loved one.

Handmade gifts are becoming more and more popular. With great interest, parents make crafts for kindergarten, school with their children, give unique things to relatives, colleagues and friends. Naturally, the best christmas decoration At home, a Christmas tree made of paper, sweets, tinsel glasses or napkins is considered.

Today we will get acquainted with some ways in which you can make an unusual, but very beautiful Christmas tree with your own hands. We will use the simplest and most inexpensive materials.

Do-it-yourself Christmas tree made of sweets and improvised materials: photo

List of materials:

1. base (cone)
2. Candies,
3. Tinsel,
4. Glue,
5. Scissors,
6. Decorations (bows, balls, stars).

For the base, you can take everything that will hold the cone:

• special styrofoam figures
• cardboard
• colored paper
• an empty box from the same sweets that are planned to be used as decoration
• Anything that comes to mind and comes to hand

A variant of a Christmas tree with a cone made of plain paper and sweets: diagram, description

1. We take any colored sheet, fold it to make a cone, fix the edge with glue and remove the excess with scissors. The base is ready.
2. We pass to the tinsel. Starting from the base, we pass the glue with dotted movements and from above, we wind the tinsel spirally to the very top. If there is an asterisk in size suitable, then you can fix it.
3. Candies are attached to the Christmas tree around, using glue or thread. It is advisable to use 1-3 colors of candy so that it is harmonious and not sticky.
4. If there are any balls, bows or other decorations, then we attach them at the very end. Specially fixing in those places where the space was visually formed.

This is the fastest way to make a Christmas tree with your own hands. Estimated production time is up to 10 minutes.

• The base of the Christmas tree can be decorated with cotton wool, thus creating a “snow effect”.
• For lovers of American style, red bows around the entire perimeter are ideal.
• We do not limit our imagination and do as our inner voice tells us.

This is a chic New Year's gift for grandmother, teacher, aunt, sister. The most popular sweets are raffaello, ferroroche, although from ordinary caramels it also turns out a sweet, sweet Christmas tree.

DIY Christmas tree made of colored paper: photo, description

To make a paper Christmas tree, we need:

1. Paper (the more paper the better)
2. Glue,
3. Scissors,
4. Pencil or pen
5. Decorative materials for decoration.

• We cut out a circle from paper, with which we make a cone for our Christmas tree.
• The easiest option would be to paint the Christmas tree with any colors and
  for volume, add a few beads, securing them with glue.

The tree is ready.

Also, after we have made a cone, you can cut a huge number of small circles, each of which we attach to the Christmas tree with glue, spreading only half of it, and bending the other a little. As a result, we get a voluminous Christmas tree.

How to make a cute Christmas tree out of paper snowflakes and mini barbecue skewers: instructions, photos

A version of a Christmas tree made of paper snowflakes and wooden skewers for a mini barbecue.

• Cut out snowflakes, as shown in the figure below, of different diameters. The top is the smallest, and then we increase the radius of the circle by 1.5 - 2 times. How do you like the splendor of the Christmas tree. The more we increase the diameter, the more magnificent the tree.
• Cut the snowflake to the center of the circle. Cut out a segment at the top of the snowflake 1/3 of the circle. From the second snowflake (middle) cut out 1/4 of the circle and from the third (bottom) cut out 1/5 of the circle.
• We glue the edges of the snowflakes so that we get cones, as in the figure below.
• We string snowflakes on a skewer and get beautiful Christmas trees that are suitable for decorating a festive table and interior.
• The skewer can be stuck into fruits, dishes, into a piece of foam, as in the figure below. It all depends on your imagination.

Christmas tree made of paper palms: instructions, photos

Interesting and unusual can be called a "Christmas tree made of palms." These can be the pens of family members or students of a school, a particular class or group.

There are many options. The ideological purpose of such a Christmas tree is to unite a certain number of people.

In order to make a Christmas tree from the palms, we need:

• glue,
• marker,
• scissors and
• several sheets of paper (the number depends on what tree we want to see in the end). Small - up to 7 palms, medium - 12-15, large - more than 20.

We take a person’s hand, draw a contour, cut it out and paste it on a wall, whatman paper, a cone or something else. We do this until the size of our Christmas tree suits us as much as possible.

For the top, you can cut out a star, and decorate around the entire perimeter with tinsel or small balls made from a contrasting color of paper. Thus, we will create the effect of a smart Christmas tree.

From such palms you can make various shapes to decorate houses, kindergartens and schools.

Another of the unusual crafts is the "Christmas tree from a magazine."

A magazine with at least 200 pages and glossy pages is ideal. The thick cover can be removed. And now patience and time.

• We bend each upper right corner of all pages towards us at 45 degrees.
• All lower corners that go beyond the borders are wrapped up.
• We fold the remaining pages of the magazine in the same way.
• It turns out an accordion. When it comes to an end, we see an interesting Christmas tree that can decorate any office all year round.

Christmas tree from old unnecessary children's coloring pages: manufacturing description, photo

Do not rush to throw out your child's already colored magazines, because the New Year is ahead and everything will come in handy for us. So,

• we take the usual cone made of paper, which we have already fallen in love with,
• glue,
• scissors and
• coloring, which we cut as much as possible long stripes, 3 cm wide.

From it we will now make a garland. We fold our strips and glue them together horizontally, after that we make vertical cuts along the length of the entire garland in half the width and with a frequency of no more than 5 mm.

We create the effect of a “comb”, after which we simply paste it around the cone of the entire Christmas tree. Thus, the "teeth of the comb" turn into the "sharp needles" of our Christmas tree.

There are a lot of ways to make a Christmas tree with your own hands from paper, we examined the simplest and at the same time the most unusual.

Do-it-yourself Christmas tree-topiary from napkins: instructions, photos

I want to say right away that a Christmas tree made of napkins always differs from other crafts in its visual airiness and tenderness. Some do not immediately manage to understand what material it is made of.
Topiary lovers will really like this version of creating a Christmas tree with their own hands. In order to make a topiary tree, we need the following materials:

1. Napkins,
2. foam cone,
3. glue gun,
4. A decorated rod that will hold our Christmas tree (often they take an ordinary tree branch and disguise it under decorations),
5. small pot,
6. Gypsum (gypsum plaster is also suitable),
7. Beads on a string or other decorations.

• We mix gypsum with water, pour the mixture into a pot, fix the holder for the Christmas tree in it and put the cone of our Christmas tree on it.
• With the help of templates, we draw circles on napkins and bending the edges, we make “mini-roses” from each napkin.
• Next, each decoration, using a glue gun, is applied to the cone, filling the entire space.
• You can put a few of these "Mini Roses" on top of our pot to arrange all our crafts in style.
• We wind tinsel (beads on a string) around the entire perimeter of our Christmas tree, everything that looks beautiful will do.

Our do-it-yourself napkin tree is ready.

Napkins for this yo Lacks can be the same color or you can take 2 colors and combine them beautifully. Including your imagination in this project will give excellent results.

If you are not a fan of topiary, then a napkin Christmas tree can be made on a regular cardboard cone, completely repeating the above process. Another version of the Christmas tree from napkins.

DIY Christmas tree from a bottle of champagne: photo

For the manufacture we need the following materials:

1. Champagne bottle
2. Tinsel,
3. Glue gun and glue.

A simple gift can be decorated in an original way if you take a bottle of champagne, glue the tinsel dotted with glue and decorate with additional accessories.

We will succeed, inside which there will be a surprise - a bottle of champagne.

Making a Christmas tree from plastic bottles: a photo, a diagram and a description of the manufacture

At home, the most common method is to make a Christmas tree from plastic bottles. List of required:

1. Green plastic bottles
2. Paper,
3. Glue gun and glue stick.

• We turn the sheet into a tube to get a diameter of 1-2 centimeters.
• We cut the bottle into strips 2-5 centimeters wide and no longer than the one that wraps our paper tube.
• We cut the plastic strips perpendicularly to get a “comb effect”.
• We dig an even edge with glue and attach it around a paper tube.
• The longer the needles of our Christmas tree, the more beautiful.
• It is advisable to calculate the length so that the bottom is wider than the top, while maintaining the proportions of a real Christmas tree.

You can leave the craft as it is, or you can decorate it with additional accessories made of paper, cardboard or other materials.

You can hang on such a Christmas tree real Christmas balls, only a small size, so our craft will look more real.

In conclusion, I would like to say that there are many ways to make a Christmas tree with your own hands.

The main thing is to show imagination and try.

Do-it-yourself gifts always delight much more than ordinary figurines bought in a store.

Making crafts together with children brings not only joy, but also real benefits, because during such activities mutual understanding of the parent and child is formed, tactile sensations develop.

Ideas for creative Christmas trees with your own hands from improvised materials: photo

Dear needlewomen lovers! I represent new Master class "Christmas tree do it yourself step by step photo". Here I tried my best to show and tell in detail how I made one of my favorite Christmas trees "Green Apple" with incredible delicious jelly candies!

As you have already noticed, there have been a lot of changes on my website lately... This is the first Master class that I am posting under my new Ermilova Decor logo! For me it was a real new twist and I hope that it will inspire me to continue my creative work...

So what we need:

Christmas tree stand, it can be a saucer for a flower pot

Floral mesh and organza (you can felt)

toothpicks

Double-sided tape

Glue gun, scissors, pliers, floral tape, stapler

Various Christmas decorations

First, glue the base of our cone to the stand strictly in the center. Preparing sweets.

I will show on the example of one candy, and you can do these actions for a dozen candies at once. We take a toothpick, wrap double-sided tape on it. Cut off the excess wrapper from the candy (if the tail is too big).

Slightly unwind the tail of the candy and insert a toothpick there with the glue end. Fix tightly with teip tape.

I wanted to combine two materials: floristic mesh and organza. To do this, we cut strips, and then into squares.

Now we connect the squares as follows:

Piercing the material, insert a toothpick into the center of the squares, wrap around the candy and fix with a stapler.

We immediately do this with a dozen candies. The size of the squares depends on the level of their location. At the lower level, we need more squares, the higher - the less.

Now we are preparing small Christmas balls. We remove the mount for the suspension, apply glue and stick a toothpick inside, wait for the glue to harden.

We fix it with teip tape and wrap it in the material just like sweets.

We take pliers and stick our candies alternately with balls into a cone.

We do the next row in a checkerboard pattern. We close the empty areas between the sweets with the pounds. Can you remember again

Our Christmas tree is ready! I hope the step-by-step photo helped you make your unique New Year's beauty!

It will become not only a decoration of the holiday, but also a delicious surprise for the kids, who will be happy to taste her “toys” after the holidays are over.

There are many options for how to make a Christmas tree out of candies with your own hands.

We propose to consider one of the most budgetary, which does not require a large investment of money, since it takes a relatively small amount of candies. At the same time, such a Christmas tree looks no worse than those made in other ways.

For its manufacture you will need:

• a sheet of green cardboard;
• lush green tinsel;
• glue;
• sweets in the form of "bells", wrapped in such a way that the candy itself lies in the center of the wrapper, and the edges of the wrapper are gathered at the top. The brighter the wrapper, the more elegant the Christmas tree will turn out.

Let's get started!

We turn the cardboard sheet into a cone, fix it with glue.

We cut off the bottom edge so that it becomes even, and the cone can stand on a flat surface. In order for the cut to be even, you can put a dotted line on the cone.

We put the cone in front of us - we got the base

Cone - the basis of crafts

We begin to turn it into a Christmas tree. To do this, we fix the tip of the tinsel at the top of the cone. You can simply thread it inside and tie a knot on the back.

Now, carefully, circle by circle, we wrap the cone with tinsel, trying to lay the layers parallel to the surface of the table, that is, in even horizontal rows. We fix each row with glue. We press the tinsel well so that the glue grabs its very middle, otherwise it may fall off over time.

Gradually, our workpiece begins to take on a resemblance to a Christmas tree.

It remains to wrap it with tinsel to the end and cut off or bend the extra tip.

The tree is already ready.

Now we proceed to the most interesting - we will dress her up.

We take sweets and glue them on tinsel the way we would hang Christmas decorations. Do not forget to decorate the top - sweetie in this case will replace the traditional star.