DIY chokers for the neck with a ring. DIY neck choker. How to make a choker around your neck? What does a choker on your neck mean? How to make a fabric neck choker

When many people hear the phrase DIY fabric choker, they think of the black elastic band choker that was so popular in the 1990s. However, this decoration has been around for many centuries. The Indians also used it as tribal totems. And the use of velvets by European aristocrats has fully earned chokers their place among jewelry. Even queens did not hesitate to wear them, let alone ordinary women.

Nowadays chokers can be made from a huge number of materials; they can be playful, romantic, gentle and rough. Their use will easily help you stand out from the crowd, making your image a little fatal and mysterious, while leaving the desired impression. Fabric chokers can give you elegance, the main thing is to carefully monitor the position of your neck. Quite wide fabric chokers noticeably shorten the neck, so sweaters without a neckline and buttoned blouses should be prohibited.

An integral part of the Rococo style, chokers have truly completely occupied their niche among accessories for fashionistas.

DIY fabric choker: features and materials

Leather, suede, spandex - these are the fabric options that are most popular in these seasons. The most striking accent will be the use of satin, the choker from which is not tied on the neck with a bow, but the ends simply hang down.

In this article we will consider a leather product. The famous Coco Chanel gave a new breath to this type of chokers, who used leather and velvet chokers at her shows. If your taste leans a little towards a darkish gothic style, then this is your choice. It is also perfect for lovers of ethno style, that is, lovers of natural things.

The main advantage here is that the skin simply does not rub the neck, so it is great for beginner fashionistas. At the same time, it will perfectly highlight the whiteness of your skin, creating a wonderful contrast.

To make a fabric choker with your own hands, you will need a strip of leather. It is usually quite narrow, but some people prefer to use a wider option. Nowadays there are quite a large number of different leather colors on sale, so there can be an innumerable number of options.

You will also need a base for the pendant, which can be filled with chipped pebbles or the finished pendant itself. You should also have 4 rings, a lock, 1 pin and 4 tape clips on hand. The tools you will need are pliers, an extension cord, scissors and a ruler.

DIY fabric choker: sequence of actions

1. The first step is to prepare the suspension. If you want to make it yourself, then you should smear the selected setting with glue and stick chipped pebbles on it; a pomegranate will look especially beautiful. Ultimately, it is best to leave the prepared pendant for 12 hours. It is during this time that it will dry completely, and the stones will not break off.
2. The next step is to prepare the skin. If you have chosen a fairly thin leather, as recommended, you should measure approximately 1-2 cm. This will be the width of the necklace. You need to measure approximately 25 cm in length. This piece should be carefully cut out.
3. The wrong side of the leather should be greased with glue, and the edges should be folded towards the middle. It is best to do this gradually.
4. The resulting strip should be cut in half and using pliers, place clamps on each side. Take a pin, string a pebble on it and make a spiral.
5. Take the extension cord, open the outermost link and attach a pebble to it.
6. Take one half of the leather strip and secure first the ring and then the extension to the clamp. On the other strip, attach the carabiner from the lock to the clip.
7. Now you should put on the pendant. Place a ring on the free clip and secure the pendant. The same should be done with the other free clamp.
   How to make chokers from other materials with your own hands, see the section

Choker is a decoration for the neck, which will highlight the beauty of any fashionista. This accessory has not gone out of fashion for quite a long time due to its versatility.

It can also be worn with evening dress, and with jeans. Women and girls of any age category can afford to wear it, you just have to choose the right model. But such jewelry is not found on sale as often as we would like. Therefore, you can learn to do it yourself.

What can a choker be made from?

Choker made of fishing line. The trend is black, white fishing line will look like an elegant decoration, especially with the addition of beads.

Choker made of small rubber bands. Special sets of tiny rubber bands of different colors are sold; they come complete with a hook and detailed instructions, which will help weave them together.

Headphone choker. For some reason, the headphones fail, and it’s a shame to throw them away, then you can use them for completely different purposes. Only the wires must look good; shabby wires will not work.

Choker made of satin ribbons. A choker made of satin ribbons, where each eyelet will stand out, will turn out to be openwork and romantic; it can also be decorated with a beautiful pendant.

Beaded choker. This option is suitable for festive dresses; by the way, making a choker from beads is not so easy, it can consist of many rows, contain beads of different colors, and have a wide variety of shapes.

Choker made of threads. Wizards who master the technique of crocheting can also try crocheting a choker. A lace choker made of threads will look especially appropriate with a woolen dress.

Lace choker. Very young girls will suit thin and elegant jewelry, older women will suit larger and more massive lace, but all options will look very elegant.

How to easily make a choker at home?

Translated from English, choker means “strangler”, as it fits tightly to the neck, but does not cause discomfort. This type of jewelry also looks like an openwork collar.

Chokers first appeared in American Indian settlements and served as protection against evil spirits; of course, back then they were made from natural materials. Then the fashion for chokers overtook Europe.

In the 90s, this decoration created a real sensation. It was worn by representatives of the fair sex of different ages. The choker also included a wrist bracelet. An accessory such as a choker is sometimes at the peak of its popularity, sometimes the fashion for it subsides a little. In any case, the choker is also in trend now.

The technique of making a choker is not complicated; you just need to decide what materials you will make it from.

How to make a velvet choker: step-by-step instructions

1. Take a velvet ribbon approximately 50 cm in size, it can be purchased at any sewing store.
2. The main decoration of such a choker will be the end caps, which will secure the ends of the ribbon without sewing or gluing. Ask for this fittings in the same specialized stores as for velvet ribbon.
3. Now it's simple: Using pliers, bend the ends at the edges of the tape.
4. Tie the choker beautifully in a bow at the back of your neck , this is the whole essence of this particular decoration, wear it with your hair pinned up.
5. If you want the velvet choker to decorate the neck more at the front, measure a piece of ribbon that strictly fits the circumference of the neck, decorate it with a pendant and attach clasps (they are similar to end caps, only they are attached to each other).

How to make a beautiful choker from a satin ribbon?

• Cut a satin ribbon half a meter long, then cut it in half again.
• Place the connecting ring in the center of these segments, lubricate the edges of the tape with textile glue and, forming loops, fix the ring between the pieces of tape.

The loops on the edges of the ribbon should fit the ring tightly, it should not dangle.

• Once the glue dries, you can easily wear the choker by tying it around your neck and combining it with almost any clothing.

How to make a choker from beads: options with photos

Here are options for making a choker from beads with patterns for weaving them.

How to make a choker from lace: master class

• The model of this choker is not so easy to make, but the finished product will justify all the effort.
• Carefully measure the circumference of your neck so that the choker fits tightly to it.
• Make blanks for the flower, cut out six long petals and two round centers from felt fabric. Lay out the petals so that the bottom tier protrudes slightly and is longer than the top, and pin the pieces together with pins.
• Take one petal of the top and bottom layers, fasten them with stitches along the fold line and tighten the thread a little, a fold should form.

• Do not break the thread, then continue the same algorithm with the remaining elements.
• Gather all the petals tightly into a flower and sew one circle on top. Decorate the middle of the flower with beads, beads, and sequins.
• Weave a red ribbon into the black lace. At the same time, sew a black braid one centimeter wide, thereby securing the red ribbon. Decorate the cut beautifully by sewing black braid along the entire width of the cut.

• Measure the third part of the length from the beginning of the choker and sew a second circle in that place from the wrong side, and sew a flower to it from the front side. For decoration, attach a black chain to the choker.

How to make a choker: simple and clear diagrams

Below is diagram of a detailed description of a leather choker .

You will need:

• Natural, soft leather;
• A cord, the length of which will correspond to the circumference of the neck, 5 mm thick;
• Scissors, needles of different thicknesses;
• Beads and rivets for clothing;
• Locks, nails, chain for decoration;
• Nippers, pliers.

• Make a mark on the inside of the leather, cut out two strips of one and a half centimeters. The length will be equal to the circumference of the neck minus 2 cm, which will then be supplemented by a clasp.
• Fold one piece of leather in half and fold it in the center.
• From the center on both sides, mark the places where the rivets will be attached, spacing 1.0 cm from each other.
• Now attach the rivets as shown in the photo.

• After attaching all the rivets, sew both parts of the leather together, simultaneously sewing with beads.
• Thread the cord prepared in advance between the leather flaps, so it will look more voluminous and hold its shape better.
• Continue sewing the seams with beads, reaching the middle; instead of the usual beads, sew a large one, the pendant will then be attached to it.

• Next, attach the clasp, just pinch the edges with pliers to avoid scratching, you can put a piece of fabric under the pliers.
• Attach a pendant in the center of the choker, where a large bead is sewn.

How to make a choker from fishing line?

• Prepare the necessary materials and follow the diagram below, it is quite simple in its implementation. The only materials you will need are fishing line, scissors, and tape.

• Bend a piece of fishing line in half and secure it with tape, or use a paper clip.

• Proceed to weaving a choker, guided by the diagram.

• When the product reaches the desired length, tie the ends with a knot; no fastener is needed here. The fishing line stretches very well, so the product can be worn over the head.

How to make a choker with your own hands from floss threads?

1. Take floss threads of different colors , they must be combined with each other or create contrast.
2. Weave them into a braid , secure the edges with thread so as not to bloom. You can make a choker from one braid, or you can weave several, only the length of the bottom braid should be slightly less than the subsequent ones, so they will form into a beautiful and even semicircle. Or weave one long braid and then fold it in half.
3. To the edge of the bottom braid and on the sides of subsequent ones attach a large chain . Attach a carabiner to the jump rings . The decoration will be tied with ribbons, tie the edges of the ribbons to the carabiner and wrap them around the ends of the braids. That's it, the choker made from floss threads is ready.

Here is another manufacturing option choker made from floss threads .

1. Even the most discreet look can be complemented by a bright and massive necklace. The simplest dress can be combined with a memorable accessory, and your look will be simply irresistible. A thread necklace is a type of jewelry that is difficult to find on store shelves, but you can create it yourself, and no one else will have such an accessory, it will be unique.
2. The choker is supposed to be massive, so wrap floss threads on a board or other base to create a thick thread.
3. Tie the thread at one end and cut it at the other.
4. Braid the simplest braid using these threads. Strongly do not tighten, it should be of medium thickness. Cut off the excess ends of the threads.
5. Sew the braid to the metal chain The longer it is, the longer the choker will be.
6. Attach ribbons to the ends of the chain , on which the decoration will be tied.
7. TO Sew large beads on the bottom side of the braid , place the largest one in the center.
8. Experiment with the width of the braid and the colors of the threads; you can complement this choker with a similar bracelet.

How to make a choker from headphones?

Everything ingenious is simple. Tie the headphone cord around your neck several times and tie it with a bow at the front. Decorate the ends beautifully. Or you can attach a clasp to the cord and hang the pendant on it.

You can also weave a choker from headphones using the double knot technique.

How to weave a choker from rubber bands for braiding around the neck?

A choker is a decoration that can be made from many materials, even from silicone rubber bands. It is worth remembering that such an accessory is suitable only for very young girls. You just need to buy a large set of elastic bands at a craft store; the kit includes fasteners and a special hook for connecting them, but you can also tie them on your fingers, and this is the method we will consider. This weaving method is called fishtail. Look carefully at the photo to see how to properly connect the elastic bands together.

Anyone who remembers being a 10-15 year old teenager in the 90s will certainly remember with nostalgia choker collars, which were simply wildly popular at that time. And this despite the fact that they were woven from ordinary fishing line. And it seemed to us that they were fraught with some magic and mystery. No one tried to weave them themselves, but you could buy chokers in any tent or store.

How to make a choker tattoo on the neck?

Today it is not so easy to find this decoration, but the secret of its weaving has finally been revealed. So you can make a choker tattoo with your own hands for yourself and for your friends - they will be very grateful to you for such a gift-memory.

By the way, few people know the history of this decoration. And at one time it was a kind of talisman or totem among Indian tribes, with which they boldly went into battle and did not fear defeat. It is clear that then chokers were mainly worn by men, not women.

A lot of time has passed, and they have already become fashionable among the fair half of humanity, becoming an integral attribute of fashion. And if previously only a select few were privy to the secrets of weaving technology, today there is nothing secret about it.

Master class on weaving a choker tattoo

Since the name of the jewelry speaks for itself (“choker” - a short necklace, “tattoo” - tattoo), its appearance should resemble a tattoo on the neck (wrist, finger). Therefore, to create a necklace (bracelet, ring), it is best to choose the black color of the material, as it was in our adolescence. Although there is absolutely no limitation in this, today chokers are woven from spandex, fishing line, even from headphone laces of various colors and with the addition of any details - beads, pendants, ribbons, etc. Modern chokers are no less popular than, or any other non-standard accessories.

What you need for a choker tattoo:

• spandex or fishing line of any thickness;
• beads;
• a thick-bound book or notebook;
• stationery clip;
• lighter.

The diagram for weaving a choker tattoo with your own hands is as follows.

To make it clearer, let's look at the whole process step by step, after which you can easily repeat it yourself:

Many people are interested in how to finish a choker tattoo, attach a clasp to it, or is it better to make it put on over the head. In our childhood and youth, these “collars” were worn over the head, and there were no fasteners on them.

We suggest making just such a version of the choker. To do this, after reaching the required length, cut off the excess pieces of fishing line (spandex) and singe the ends, gluing them together. It is better to hold them with tweezers so as not to get burned. You need to thread the fishing line into the resulting loop from the other end and melt it in the same way.

Tattoo choker- This is an unusual type of decoration, as it creates the appearance of a tattoo on the human body. The material that is used to create a choker is ordinary fishing line or elastic thread, which can be bought in the store at a very low price. Creating such a decoration with your own hands will not take you much time and effort, so let’s learn how to make a choker together.

What can a choker be made from?

Many people wonder what a choker should be made of, and we have the answer to this question. The main task is to choose the right material for the choker. This can be a fishing line, or a special elastic-stretchy spandex fishing line. Of course, spandex will be easier to work with and will look better, but if you have a lot of fishing line lying around at home, then why waste money? It is advisable that the fishing line be black, so it will look more attractive.

How to make a choker around your neck?

To create a choker we will need:

Lighter

Beads (optional)

These materials are not difficult to find on store shelves, and they will cost just a few pennies. Having prepared everything, we can begin.

1. We cut the fishing line 2.5 meters long. We bend it in half. To make it more convenient to make a choker, it is better to attach the clip to some book or board.

2. We insert the bend of the fishing line under the clamp, thereby fixing it. Next, take the left part of the fishing line and lay it on top of the right one.

3. Now, we push the end of the right part of the fishing line back under the right part (as shown in the photo).

This is the kind of loop we should get:

4. Now we pull this loop to the very top.

5. The next step is to take the left side of the fishing line and lay it down on the right side.

6. And again we make a loop, inserting the left end of the fishing line under the left part.

7. Pull the loop up again.

8. We continue weaving, thus first making a loop with the right part of the fishing line, then with the left.

9 . At the request of the creator, you can decorate the choker with beads, stringing them on a fishing line from time to time.

10. We braid the choker to the length we need, then cut off the excess edges.

Jewelry has always been the most important part of a wardrobe. Probably, the love for all sorts of “trinkets” is passed down from generation to generation, because even a small piece of jewelry makes a woman special and sets her apart from the crowd.

Not so long ago, simple, at first glance, jewelry – chokers, beloved by girls from the 90s and forgotten by girls from the 2000s – were once again at the peak of popularity. Yes, these are the same necklaces made of thin wires, fishing lines or ribbons that fit very tightly around the neck and from a distance resemble a tattoo. This is where another name came from - tattoo choker. Do you dream of something like this, but just can’t find one that you really like and stands out from the rest of the crowd of similar jewelry? Let's learn how to make it yourself.

Who shouldn't wear a choker?

Yes, there are contraindications to wearing jewelry, especially when it comes to such a specific accessory as a choker. Although the list of contraindications is quite short, we still recommend that you familiarize yourself with it so as not to harm yourself, because beauty should never come before health:

• 1 Doctors do not recommend wearing such an accessory to girls with an enlarged thyroid gland. Since the choker should be as close to the skin of the neck as possible, this can cause additional pressure and impair the outflow of lymph, which will negatively affect the general condition health;
• 2 Do you have irritation on the skin of your neck or even small wounds or sores? Avoid wearing a tattoo choker for a while so as not to irritate your already vulnerable skin;
• 3 For asthmatics, it is also better to refuse such an accessory, or at least wear a choker that is not too narrow, so that nothing interferes with normal breathing;
• 4 and from an aesthetic point of view, chokers do not look very nice on short necks.

Learn how to make a choker with your own hands

Now let's move on to the most interesting part - the learning process. Even a person who has never done hand-made work before can make such a decoration, since you will need a minimum of materials, a little patience and a couple of free minutes. We have prepared master classes for you, after studying which you will be able to weave a choker from materials that, in principle, can be found in every home:

- from satin ribbon (this is a glamorous version of a choker. Similar versions of chokers are preferred by Hollywood stars and many celebrities);
- from ordinary fishing line(these are now very popular among tumblr girls and the world's most famous bloggers);
- from an old phone charger(this will be a more “brutal” version of the choker, which will perfectly emphasize the fragility of a thin woman’s neck).

DIY satin ribbon choker

This is the easiest version of the choker to make, but at the same time the most feminine. It will look great on both a very young girl and a stylish lady who feels great fashion trends.

We will need:

1. black thick satin ribbon (give preference to a ribbon whose width will be within 1-2.5 cm, so the decoration will focus most of the attention on itself, but will not burden the image). Just 1 m of such tape is enough to make three chokers at once;
2. clasp for jewelry with a short chain (so that you can adjust the length of the finished jewelry);
3. a beautiful pendant stone, for example, in the shape of a crescent;
4. flexible measuring tape;
5. needle and black thread.

Preparation method:
- measure the circumference of your neck using a measuring tape. You should not add additional centimeters to the resulting figure, since we will adjust the length of the decoration using a clasp;


— cut the ribbon to the required length and carefully sew the edges with a needle and thread so that they do not stick out;


- we sew a clasp for jewelry on one end as securely as possible, and on the other - a short chain;

Advice! If your tape is double-sided (Euro tape), then it doesn’t matter which side you sew the chain and clasp on, but if the tape has a front (shiny) and back side, follow this rule: for right-handed people, it is recommended to sew the clasp on the right end, and the chain on the left, left-handed people need to do the opposite. This will make the process of putting on jewelry much easier.

— fold the decoration tip to tip to find the middle and sew a beautiful pendant at the resulting point. If you have a pendant with a large enough ring for stringing, you can simply thread the ribbon through the pendant.

DIY fishing line choker

Now we will learn how to make a choker tattoo on the neck, one that from a distance will resemble a tattoo of a neat weave.

We will need:

1. fishing line (“vein”, elastomeric thread or latex line) 3 m long; beading line should be discarded as it is too thin;
2. scissors;

Preparation method:
- the simplest and most popular technique of weaving “snake” will be completely accessible even to girls who have not previously done needlework;
- find the middle of the fishing line, secure it with a clothespin on cardboard or a book;


- make a knot so that the tip of the fishing line extends above the loop;


- repeat the same procedure with the other half of the fishing line, again making sure that the end of the fishing line is above the knot;
— we try to make air loops of approximately the same size;


- after completing the weaving, tie the ends of the fishing line with a secure knot, and also tie the clasp.

DIY choker made from charging wire

A choker decoration made by yourself from a wire from a phone charger looks very fashionable and unusual. The result will be a rougher, but very interesting decoration.

We will need:

1. old unnecessary charger;
2. scissors;
3. regular or stationery clothespin;
4. a sheet of thick cardboard or a book (magazine);
5. clasp for jewelry with a short chain or fixing ring.

Preparation method:
— we cut off the power supply and adapter, that is, we only need the cord;



— the scheme is the same as for a choker braided from fishing line; after we securely fix the cord on a solid base with a clothespin, you can begin weaving;



- in this case we do not make air loops, but tighten them tightly enough so that the decoration does not turn out to be too bulky;



- We attach a clasp and a short chain to the ends.