Patterns and step-by-step instructions for knitting bouclé patterns. Beret for autumn, knitted with a boucle pattern - retro style. Boucle pattern on knitting needles.

The pattern under the beautiful name “boucle” is perfect for blouses, dresses, and hats. Therefore, craftswomen should take it into service and master knitting according to patterns.

There are several options for knitting this pattern. As a result, you will receive a canvas based on the front surface, decorated with bumps or bumps.


A couple of tips before you start knitting:

  • You will need to cast on an even number of stitches to get a symmetrical pattern.
  • All cones should be the same size.
  • The size of the tubercles is selected depending on the model. For children's clothes, make them smaller.
  • Large bouclé looks better on hats and cardigans. Try a variety of designs to see which one is right for you.

The number of cast-on loops must be divisible by two, that is, be even.

Cast on the loops.

Knit the first row with facial loops (LP).

Turn the canvas inside out. The third row is the wrong side.


3rd row, after the edge stitch, perform purl loops (IP).

Start knitting the cones. From the third loop, knit five (1 LP, yarn over, 1 LP, yo, 1 LP).


Throw all 5 stitches back onto the left needle and knit 1 stitch from them. Using a knitting needle, pick up all five loops by the front walls and pull out the thread.


The result is a lump like the one in the photo below.

Repeat the pattern to the end of the row. To make the bouclé come out neat and beautiful, alternate the cones with 1 IP.

In the next row, secure the pattern by knitting a row of LP.


The pattern has one feature: the knitting of the tubercles occurs in a checkerboard pattern. To follow this sequence when working with knitting needles, in the 5th row after the edge, start knitting the tubercle. After this, the pattern will continue 1 IP. Repeat the sequence until you reach the edge of the canvas. This is what 2 rows of tubercles made according to the “bouclé” pattern look like.

Then repeat the pattern from the first row. The finished bouclé looks impressive and beautiful.

Bouclé pattern diagram

Knitters are better versed in the sequence of the pattern if there is a pattern.

A few words about the symbols used in the diagram. The dash indicates IP, the circles indicate LP. A checkmark with a number above it is the tubercle and the number of loops from which it will be made. The bumps in the boucle pattern are made from a different number of loops - from 3 to 7. This will depend on the size of the bumps you want to get.

Video: Bouclé knitting technique

Variations of the bouclé pattern

Each craftswoman brings something of her own to the pattern. This is how many variations of each of the knitting patterns appeared. Boucle is no exception.

Openwork bouclé

For light summer blouses, an openwork version of the pattern is perfect. The pattern looks very good on children's things.

1st row (and all odd ones) PI only.

2nd row: *3 stitches together, knit 3 loops from one*.

4th row:* 3 loops from one, 3p together*.

Row 5: repeat from the first row.

Always knit IP in the classic way.

In the diagram presented, the IP is indicated as a circle. The next sign is 3 IPs together. And the last icon with the number three - three loops from one.

Video: Boucle made of two colors of yarn

Relief patterns are extremely popular. They add volume, look stylish and fashionable. Today we'll talk about the bouclé pattern knitted on knitting needles. It is about knitting with that name, and not about yarn.

Description of knitting the classic Boucle pattern

The pattern called Boucle is itself completely uncomplicated and remembering it won’t be difficult. The most important thing is to master making a tubercle, for which you need to knit five from one loop, then slip them back onto the left knitting needle and knit simultaneously purl-wise.

Bouclé pattern diagram

1st: facial;
2p.: *P1, 1 tubercle* - repeat until the end of the row;
3p.: knits.p.;
4p.: *1 tubercle, 1 p.*

Technique for knitting cones. Step by step description:

1. Insert the needle into the loop and knit. Do not drop the loop on the left needle.

2 Yarn over.

3. Knit another knit stitch.

4. And 1 more yarn over and knit stitch.

5. Drop the loop from the left needle.

6. Throw these 5 loops back to the left sp.

7. Place the working thread before knitting. Purl 5 stitches together.

If we talk about what can be knitted, almost everything. This is how cardigans, coats, sweaters, bags, household items, hats, snoods and much more are knitted; you can not only make the entire product, but also combine it with other knittings.

Second method

This knitting, which is also called boucle, is performed in a completely different way. And it is much easier to knit than the first option.

How to knit a pattern

Cast on a number of loops that are a multiple of 4 plus 2 edge stitches.

1r. and all odd ones: purl;
2 p.: *knit 3 p. from one, then 3 p. together purl* - continue until the end of the p.;
4p.: *3 p. purl together, then 3 p. from the 1st*

Alternate from 1st to 4th row.

A knitted openwork pattern imitating Boucle is looser and is more suitable for summer clothes, stoles, capes.

Did you like the drawing? Bookmark it. Tell us what you knitted this way.

The bouclé (rosehip) pattern is one of the most popular among beginning knitters. It is simple to make, but due to its original relief it decorates almost any product: it is used to create hats, scarves, cardigans, dresses or blankets, as well as children's items. As you can see in the diagram below of the bouclé pattern with knitting needles, the simplest stitches are used to create it - knit, purl and bump.

In this diagram, circles represent knit stitches, stripes represent purl stitches, and a check mark with the number 3 represents “bumps.” The three in this case indicates the number of knit stitches that are needed to create each of them.

In fact, “boucle” is a regular stockinette stitch into which embossed tubercles are knitted in a checkerboard pattern. As a rule, they are formed from five loops, but if the author wishes, their number can be increased, then the pattern will become more prominent.

Classic bouclé

Rapport (repeating part of the pattern) of the classic “bouclé” - four rows. To create it, you need to cast an even number of loops on two knitting needles. Then one of the knitting needles is removed and the first row is knitted with regular knit stitches.

The fabric should be turned over and purl one stitch. Then the formation of “bumps” begins:

  • from one loop you need to knit five: first the front one, then the yarn over, again the front one, the yarn over and the front one;
  • remove the main loop from the left needle;
  • transfer five knitted loops to the left knitting needle;
  • knit all five like purl.

Until the end of the second row, the “bumps” need to be alternated with purl loops. The third and all subsequent odd rows are knitted with facial loops. The “bumps” should be placed in a checkerboard pattern: to do this, in the third row you need to knit the tubercle first, and then the purl loop, in the fifth - vice versa, and so on.

For knitting a classic bouclé, the thickness of the yarn does not matter; this pattern looks appropriate on both winter and summer items.

Openwork option

This type of “boucle” is distinguished by its lightness and airiness; it is more suitable for summer clothes for women and children. It is better to knit it from thin yarn, which will help preserve the beauty of the pattern and make working with this technique easier. Unlike the classic one, the “bumps” in the openwork “boucle” are knitted not from five or more, but from three loops. Otherwise the technique is similar.

The number of loops you should cast on is a multiple of four. The first row, like the other odd rows, is knitted purl.

In the second row, you should knit three loops together with one purl, and then knit a “bump” of three loops. In subsequent even-numbered rows, as before, the staggered order of placement of the tubercles must be observed.

Trying a gradient

Two-color bouclé is a little more difficult to knit than classic and openwork. To create it, you need to cast an even number of loops on the knitting needles. Pattern repeat - five rows; below is a detailed description of them.

The first row is knitted with a lighter thread, alternating knit and purl stitches. In the second row, one knit stitch is knitted with a dark thread, then the purl loop is removed with a crochet. The whole row is knitted in the same way. In the third row, use a dark thread to yarn over, remove two loops and knit one. The pattern is repeated until the end of the row. In the fourth row, one front loop is knitted with a light thread, then three are knitted together with the wrong side. Likewise - until the end of the row. The fifth row is knitted with a light thread, alternating knit and purl stitches.

Fine pattern

Another version of the pattern is the so-called small bouclé, in which there are no “bumps” as such, and a relief pattern is created by alternating knit and purl stitches.

Repeat of small bouclé - two rows. The first row begins to be knitted from the front loop, the second - from the purl loop. In each subsequent row, the staggered order of the loops must be maintained.

Video on the topic of the article

You can get acquainted with the technique of knitting a pattern using these videos:

We would like to present to you a master class and a video for it, the “cone” pattern, or as it is also called “boucle”. The pattern turns out different, everything will depend on the yarn you will knit with. Fine yarn produces a bouclé pattern that can be used to knit any knitwear for spring and summer. And, if you choose thick yarn, the same pattern will already be dense, embossed, similar to cones, with which you can already knit bags, hats and other products for the winter. The video shows a pattern made from thin and thick yarn.

Video master class on knitting a boucle pattern with knitting needles:

Description of the process of knitting the cone pattern:

Rapport consists of any even number of loops in width and four rows in length.

How to knit 5 from one loop? We stick the right knitting needle into the loop on the left knitting needle, and knit it like a knitting needle, but do not throw it off, but leave it on the right knitting needle. Throw on a yarn over, hold it with your finger, once again pull out one knit stitch from the same stitch and leave them on the right knitting needle. Yarn over and pull out the last loop. Then we return all these loops (five) to the left knitting needle, and knit together with a purl loop.

At the beginning of the row and at the end of the row we always knit edge loops. We knit them loosely without tightening them!

From star to star - repeat the pattern.

  • 1st row: we knit the entire row with facial loops;
  • 2nd row: *purl one, from the next loop we knit five loops (three loops and 2 yarn overs), and purl together*
  • 3rd row: knit stitches;
  • 4th row: * from the first loop we knit 5 loops (three loops and 2 yarn overs), then we knit everything together with a purl loop, 1 purl *.

We knit the pattern in repetitions from the first to the 4th row.

We hope everything worked out for you.

Even loops for you.

We are waiting for your comments.



Random articles

Up